Jump to content
SAU Community

Recommended Posts

  • Replies 69
  • Created
  • Last Reply

Top Posters In This Topic

sorry I can't get these messages and can't post because I can't get onto the message board, I think my internet has a problem or maybe it is the skylines australia website not working. Hang on, I'm trying to log onto Skylines Austria. Oh well you'll all have to wait until tomorrow to see if I can get this internet whachamacallit working.......

  • 2 weeks later...

106rwkw at 5000rpm at 16psi apparently this is as much as a hotted up 5ltr HSV (cam exhaust, cold air) on his dyno. It was run in 5th gear.

This is a crap figure so you know I am not lying. There was no fan so the IC wasn't working (does that make sense.)

I have also had fitted a BOV that is set to 16.5psi, the turbo I got is not ceramic so it will go to 18psi.

Does anyone have a comment on how what dyno figures really mean.....?

He does it to simulate worst case scenarios for street cars IE 42 degrees start stop traffic on a freeway, but it doesn't help the wank factor of having some big bollocks number as your RWKW.

The problem was that the turbo blew up, I had to get a new one and then I was short a few parts because I bought something different than I thought it was... etc It had to have some major head work done too as it had lots of bits of turbo gone through it. So I am not complaining.

but if your in traffic your not going to be 5000rpm in 5th?? and in addition, if its 42 degrees, or just a generally hot ambient temperature day, you will probably take it easy or turn your boost down anyway ..

sounds very dodgey to me the general across the board thing is big bloody fan (to simulate the airspeed into your intercooler while you would be travelling along at 5000rpm!) and 4th gear as it is the 1:1 ratio as is mentioned thus its direct power to the ground through the diff. altho it will hit the limiter sometimes if you still have you, chances are your power curve will have started to drop by then anyway so it dun matter too much.

id say thanks to that guy for the help and go elsewhere that has a DynoDynamics Dyno which are the general across the board comparative dynos in australia now with the Shootout mode, and even not in shootout theyre very close now. so go somewhere else with a fan for $50 power run and see what you get in 4th gear.

thatd be more comparative to other pple i would assume !

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ah yeah I forget we aren't talking about an RB.
    • Fellow ADHDer to fellow ADHDer; Don't chase that paint perfection. Paint the bumpers, and put them on.  Leave the respray for another day. Plus, no one is going to see those old areas above. Any spots of surface rust, give them a clean up, prime, then hit with a white paint just to protect them from rusting. Again, no one can see it.   #Mine hasn't been on the road since 2011 cause ADHD... I've slowly learned not to keep f**king with shit if I don't need to...
    • That would be interested if it's the case as seems like it would make the job a lot messier but subaru sells OEM gaskets so seems it might of had it.
    • Fuel tank is out. Looks pretty bloody good under (ie above) the fuel tank.  Amazing how good the factory e-coat holds up in the hidden areas.  No where near as much body deadener to get rid of as the front but still not looking forward to it!  Shit of a job.  I'm thinking I might grab a needle scaler and give that a go before I attack it with the angle grinder and wire wheel which is how I did the front 2/3's of the car.  Feels good to be working on the car again but who knows how long it will last!  Hopefully I can get it further forward than where it was prior to this last block of work when I decided to go back 10 steps further down the rabbit hole from where i already was! The problem is, I'm realising how hard it will be to repair and paint the bumpers, which cannot be put back on the car, and have a good paint match. There are also areas where it would be VERY hard to hide the new paint where it transitions from old paint. Like this- There is only one way to do that perfectly and I really dont want to have to do what that means I would have to do... 🤦‍♂️
    • Pretty sure the factory assembly doesn't have any gasket at all, just RTV.
×
×
  • Create New...