Jump to content
SAU Community

Recommended Posts

I've had this issue on and off for a while now, so I thought I would throw it out there to see if its a common Skyline issue or if its just my R33

Often when filling up with fuel I will have the nozzle click and stop flowing fuel when the tank is not full. I will then have to endure either constant clicking and stopping of fuel flow, or Ill have to fill the tank with such low fuel flow/pressure that it takes a long time to complete.

Does this happen to you? Anyone know how to fix it?

Seriously.....

I can fuel my R33 up, have it click off a few times, then pull the nozzle out nearly all the way and gently pull the trigger to slowly fill it till its just about overflowing. I don't do this often but have done it before

Have you tried changing the way you hold the nozzle in the filler?

The way that fuel guns work, your not going to come up with a fix that is going to be cheap and easy. Your going to need to pull the tank out and mess with the filler, and all to fuel your car up which I can do fine in my untouched R33. Makes no sense at all to me

yeah, without pulling it all apart or modifying it somehow you just live with it.. I would check that your breather hose to the filler neck and your charcoal filter are ok, but not much else u can do.

well actually.

depending when your car was complied (or if it was), you may have had an Oz spec fuel filler restrictor installed (well, or poorly depending on the shop). these can affect how it breathes when filling and therefore make the pump cut off early.

have a look at whether a restrictor was fitted, and consider removing it. I understand they are no longer required anyway

Hold the weight of the pump in your hand instead of resting it down on the car (so lift it up a little) and not all the way jammed in there. changes the angle the fuel goes in and doesn't trick the pump into thinking you're full.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kaizo Industries put a VIN plate over where the Nissan plate would go. It was part of how they broke the law and attracted feds going after them.
    • Reasonably hard, although I haven't run it with the new Endless setup yet. The old brakes were F50's on 335mm rotors and the car did a 1:40.6 at Phillip Island which is a reasonable time, I'm seeing high 600s on the temperature paint. A guy I know ran the Endless fluid at WTAC without issues and he was doing 1:33's I think (Evo) with a 355/332 setup. I don't get out to the track as much as I'd like but we put the car on the hoist and spanner check every bolt and re-paint mark everything, bleed the brakes, change the fuel, check the coolant system and re-bleed blah blah blah before every event. Motorsport is expensive, RB's are expensive so a couple of hours before an event is time well spent. It's also a net time saving because if you can keep your RB from self destructing it saves you time in the long term!
    • Welcome Alice......hope you have a bit more luck from here on! What was done in the build?  
    • Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
×
×
  • Create New...