Jump to content
SAU Community

Recommended Posts

Motive-DVD-GT-R-Festival--724x1024.jpg

SAUNSW Club Entry for

2016 GTR Festival

SAUNSW has been invited by Motive DVD to have a club display displaying members cars at the 2016 GTR festival

This means you will have the opportunity to have your GTR displayed together with other SAUNSW members GTRs at a discounted rate to normal admission.

You will be part of the biggest gathering of GTRs outside of Japan ranging from R35 GTR to the Hakosuka

There will also be the following at the show

  • Drag racing
  • Go to whoa
  • Launch pad
  • Dyno Comp
  • GTR car yard
  • GTR swap meet
  • Various trade stands

​To enter these events visit http://motivedvd.com/motive/gt-r-festival/

To enter your GTR in the club display please fill out the form attatched below and email back to skylinesausnsw@gmaildotcom and pay entry as per the entry form

Event: 2016 GTR festival

When: Saturday 28th May 2016

Where: Sydney Dragway

Cost: $30

Entry Form: GT-R Festival Car Club Display Entry Form.doc

Club display is unfortunately ONLY open to GTRs but event is open to all spectators.

Spectator tickets can be purchased from here http://motivedvd.com/motive/gt-r-festival/

  • Like 1

* SAU.NSW President will be one of four Show n Shine judges. Another will be flying in from NZ - another SAU member and member of Skylines Downunder and GTR NZ - Lucas.

* SAU.NSW will have its own group of GTRs under the Club. Logistics are still to be worked out.

* SAU.NSW will have entries in the Drag I expect

* SAU.NSW will have some of its cars in the Heritage Display

* SAU.NSW might have some cars in the SnS I expect too.

So if I want the Mega Pack enrty, i just fill out the form, send the form to SAU (who will take care of the registration) and pay the $150 to jetmultimedia via paypal?

Is the club going to decide who's cars it's going to allow in its stand or anyone that enters will be in the club stand?

Anyone that enters and sends form to us is in

So if I want the Mega Pack enrty, i just fill out the form, send the form to SAU (who will take care of the registration) and pay the $150 to jetmultimedia via paypal?

Correct

Hi guys I'm new to sau, I've wanted to join for ages but never had a skyline so didn't really wanna, but not I have a nice 33 gtst, Ive never been to any car event, I really want to come to this one as I love gtr's, if I drive my skyline down, where do we park ?

Hi guys I'm new to sau, I've wanted to join for ages but never had a skyline so didn't really wanna, but not I have a nice 33 gtst, Ive never been to any car event, I really want to come to this one as I love gtr's, if I drive my skyline down, where do we park ?

Welcome to SAU!

I believe for this event (which is something we have been invited to be part of and is not a SAU NSW event), you'll be welcome to attend however entry is for GTRs only. If you drive your Skyline down you'll be in the carpark area. This may be something Motive DVD will consider but is not currently our call.

Any of our SAU NSW events however, we'd happily welcome you in any car you choose to bring with you.




  • Similar Content

  • Latest Posts

    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
    • Oh yes done this when the window started flopping around.  Turns out the guides that run along the rail chanel had crumbed way. Took off the door card and pulled out the window mech, then the window, which you have to pull out through the top. As said unbolt the guide rail and don't spend 30 minutes getting frustrated trying to find a way to slide it out upwards cause that don't frigging work. Drop it down and out through the door hole. All I did to repair it was slice some 10mm clear plastic tube, vertically, then screw it to the guide rail both sides. This tubing rolls inward on both sides and leaves a gap wide enough to hold the window. To finish all I did was lube the plastic tube with olive oil and Bob's your uncle . . . well if he has the operation he can be your Aunt ! !  10 bucks in plastic tube and another 5 minute job done again . . . . YEH BULLSH#T ! My love for Skylines knows no bounds !
    • So was there a solution to this problem? I’m having this issue now. 
    • not expensive, just irreplaceable if you don't go sub 60 at wakie in that thing people will start talking
    • I haven't replaced that, but I have had the doors apart on the r32 a couple of times The door skin will be held on by a combination of clips and bolts, just take it slowly and make sure all the sneaky hidden bolts are out Once the skin is off you should be able to pop that piece off pretty easily, looks like there are only 2 bolts holding it on
×
×
  • Create New...