Jump to content
SAU Community

Rb25det Custom Made Plenum Kit + Intercooler And Piping + More

monts
 Share

Recommended Posts

monts Explorer

monts

Posted
Posted (edited)
Hi Guys and girls,
I have a rb25det forward facing plenum kit for sale. I have purchased it and have since gone a different direction in my build. Kit conisits of
- Custom made aluminium plenum. Very well crafted retains factory throttle body and iac valve. Similar to plazmaman style where it a bolt on top section only.
This is beneficial over some other styles like greddy which use smaller runners and can cause decreased low down and midrange response.
I have recently got the plenum sand blasted to be powdercoated. So it is in a blast finish which sort of looks factory (was previously polished in some of the fitted shots).
One thing to note in the blasting process a little bit of pitting has happened near a weld. I dont think it would effect performance however if extremely fussy this can be welded up for next to nothing from an exhaust or radiator shop.
-Hybrid intercooler - Good functional condition. Could do with a polish if you want to run that way however I was going to paint black.
-Piping to suit cold side of intercooler to plenum - welded aluminium with decent size wall
-bov - turbosmart and welded on adapted which sits behind the bumper for extra stealthness
-hose fittings and clamps - bolts - throttle body and iac valve.
- Custom made accelerator cable to suit
The only thing left will be new gaskets and chuck it on. I have the gaskets i removed and they look in ok condition so they may even be able to be reused if your on a tight budget. The plenum sits nicely in the bay and has all appropriate vaccum line ports tapped into the bottom for clean install. Pickup or Postage Australia wide for $40 due to the size of box ill need to put it in. Thanks for looking.

Asking $650

0410616101

post-86763-0-09398700-1459317380_thumb.jpg

post-86763-0-81932400-1459317453_thumb.jpg

post-86763-0-24610600-1459317473_thumb.jpg

post-86763-0-13127900-1459317489_thumb.jpg

post-86763-0-86535500-1459317620_thumb.jpg

post-86763-0-84406000-1459317658_thumb.jpg

post-86763-0-97328500-1459317769_thumb.jpg

post-86763-0-04799600-1459317798_thumb.jpg

post-86763-0-51683000-1459317809_thumb.jpg

post-86763-0-49575200-1459317820_thumb.jpg

post-86763-0-79110700-1459317832_thumb.jpg

post-86763-0-34524000-1459317841_thumb.jpg

post-86763-0-37056000-1459317848_thumb.jpg

Edited by monts
monts Explorer

monts

Posted
  • Author
Posted
Hey Mate,


I could be willing to separate the kit and remove the cooler from it. I can do it for 550 minus cooler. I will keep the rest of the kit intact as the pipes are specifically made to suit and accelerator cable is needed etc

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Possible swap on R34 RB20DE NEO?

      By GTSBoy · Posted

      If the RB29 box in the car is a push clutch, then yes, you will need to deal with the pull clutch on the turbo box. You either buy a pull clutch and don't use the old one, or you do the things needed to convert the turbo box's clutch arrangement over to push. Which is a bit of a f**karound. "Making" a custom tailshaft is the easy part. But you will need to source the front clip yoke - the bit that goes into the output of the gearbox. These are not as easy to find. They are out there, but they don't grow on trees the way that they used to.
    • GTSBoy
      Turn signal wiring question

      By GTSBoy · Posted

      Indicator bulbs are way too bright to use as a "corner marker" (we call them parking lights too). Sure. Go ahead and do it. But realise that you wil need to come up with all your own wiring to do it, as no-one will have a standard howto worked out for Skylines. It's just a matter of abandoning everything that Nissan have done and starting from scratch. You'd probably be better off retrofitting tailght/brakelight globe bases into the front indicator housings and using the taillight circuit for your corner marker and the brake light as the indicator. You'd need to work out how to kill the marker circuit while the indicator is flashing, otherwise it won't flash on-off, just bright-less bright.
    • Kapr
      Possible swap on R34 RB20DE NEO?

      By Kapr · Posted

      Hi. A little bit of an update. It maybe(hope not) looks like i would need a new tranny(it would be "maybe" a cheaper or better option anyway) So i need some info. I know i need a different propshaft(i can make custom one) LSD is not a problem cuz the engine will be still(for now) N/A RB20. So if i buy RB25DET NEO tranny...is there something else i need? I read something about push/pull type but i do not know if i need to "change" something or i can just plug n play onto my engine a go? Thanks for the advice  
    • OakvilleGTR
      Turn signal wiring question

      By OakvilleGTR · Posted

      Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
×
×
  • Create New...