Help With Rb26 Oil Catch Can Puring Out

[KiwiRS4T]

I think you'll find Tomei don't do a 1.0mm restrictor - you can get one from me

Tomei do a baffle for the stock RB26 sump (around $300) or you could make your own.

Mines make a cam cover baffle kit or you could probably do it yourself.

I don't think there is any way of drilling and tapping the sump without puling the engine.

[Htowngodzilla]

Patrick, i feel same way, i don't like it, its too tiny. One of the shop build it and installed it while they build the manifold and pipes they thought RB26 behave like 2JZ., they did good job with manifold and everything else. catch can looked good Location out of the way with hose going down to drain. but once the problem came up, i pulled it out i was so disappointed with whole situation. but nice guys they said they'll take care of it they are gonna modify the can.

Edited April 17, 2016 by Htowngodzilla

[Htowngodzilla]

I think you'll find Tomei don't do a 1.0mm restrictor - you can get one from me

Tomei do a baffle for the stock RB26 sump (around $300) or you could make your own.

Mines make a cam cover baffle kit or you could probably do it yourself.

I don't think there is any way of drilling and tapping the sump without puling the engine.

Bob cool man I'm interisted and how much you sell the restrictor for. did you make ur own sump baffle and valve cover baffle or name brand

i have to see how people did their custom sump baffle and i may copy it. MINES baffle is easy to make.. can the "fuel cell foam" handle the oil heat in the motor.

or is there a special foam that mines uses.