Jump to content
SAU Community

Recommended Posts

problem putting neo in r33 s1

hi all i have dropped a neo into my r33 s1 but cant get it to fire compression is great engine cranks i have spark i can hear the fuel pump prime when i remove cas and spin it by hand i hear the injectors click i am using a s2 engine loom and tried multiple s1 and s2 ECUs i have swapped vct plug and repinned the cas plug in opposite order i bought the engine as a s2 rb25 but after closer inspection it seems to be a neo with a s2 intake manifold/throttle body/hot side. any1 got any ideas?

Sorry i cant help but it Could just be late model r33 25 they did come with a neo cas

It has the black neo cas ! neo timing belt cover and a neo vct solinoid coil packs are neo and mounted like a neo with no brackets

Which CAS do you have - R33 is metal with Mitsubishi logo Neo is Plastic Hitachi unit. And what injectors are you using?

Black cas

Look like standerd s2 injectors

Edited by Heyojaybo
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Swapped the injectors around and the misfire followed. I went ahead and ordered the Deatschwerks 550cc injectors and am currently waiting for them to be ship and arrive. In the meantime, I've had my Nistune soldered to the ECU. Tested it, and and tried it out with the software. Everything should be prepared for when the injectors arrive.  
    • Yeah they charge a little extra for mods , last year I noted no mods but I did have an exhaust fitted after that so  better to let them know cause these kinds of things can cause the policy to be void if you ever need to claim.
    • Hello, just just bought an 1999 enr34 with a stock rb25neo and I'm looking to upgrade the engine to 500whp I know some basic things but wondering if there are things I'll need to do to upgrade the stock block and all the bits and pieces to achieve this.
    • Thanks everyone for the replies and suggestions. Got the seats out (hoping I could find some existing grommets but no such luck). By tapping and measuring etc. I could figure out where I could drill through if needed. But first I borrowed an inspection camera and managed to go through factory holes in the chassis rail and could see that the captive nut was holding steady which is why it could retighten. So it was indeed a stripped section of thread, so I applied downforce by levering the bolt head with a screwdriver and went slowly back and forth until it came out. Camera helped a lot cos I could monitor that the captive nut was holding tight. Now I just have one very seized main subframe nut to tackle 馃槄
    • BOVs do have a purpose, if you ever log pressure before and after the throttle body, you will see a spike pre throttle on lift off from a WOT condition. Enough to bend throttle blades / damage e-throttle motors or simple assist in blowing off cooler pipes. FWIW, the above on really applies to those running at least 2 bar of boost. OP shouldn't have an issue, on the other hand, here are some videos of my shit box over a decade ago with some succulent dose with the airbox on and off. That shit box is unrecognisable these days 馃珷    
  • Create New...