Jump to content
SAU Community

Recommended Posts

Hey guys,
Got heaps of RB20/RB25 NEO R32/34 parts send me a message of what you need.


Can supply pictures upon request.

All items located in South Australia, happy to post at buyers expense.
Thanks


RB20DET
-RB20 Stock Turbo Heat Shield $30
-RB20 clutch lines (missing master > dis block) $20
-RB20 stock injector plugs (pigtails) $30
-RB20 powersteer pump $150
-RB20 stock head bolts $40
-RB20 CAS bracket $20
-RB20 Alternator bracket and adjuster bolt $30
-RB20 exhaust manifold heat shield $30
-RB20 stock turbo manifold $70
-RB20 flywheel needs a machine $50
-RB20 AC compressor $100
-RB20 various coolant hoses $70
-RB20 stock thermostat (good working cond) $20
-RB20 stock cam gears $40
-RB20 Green label AFM good condition (mesh still on both ends) $100
-RB20 front cam gear cover & t/belt cover $60
-RB20 top cam gear cover (painted in crinkle black paint) $40

RB25DET NEO
-RB25 neo stock injectors (370cc top feed high impedance) $100
-RB25 neo CAS $200
-RB25 neo TPS $70
-RB25 neo Stock coilpacks (good working condtion) set of 6 $200 or $40ea
-RB25 neo stock turbo manifold $70
-RB25 neo stock turbo water and oil lines $60
-RB25 neo stock turbo intake pipe $50
-RB25 neo stock head bolts $40
-RB25 neo viscous fan hub in good working codition $80
-RB25 neo stock cooling fan (trimmed to fit ic piping) $50
-RB25 neo wiring harness (missing a few plugs) $100
-RB25 neo stock throttlebody $70
-RB25 neo stock crossover pipe $30
-RB25 neo stock bov $50
-RB25 neo coilpack cover $40
-RB25 neo ecu Temp sender $30
-RB25 neo gauge temp sender $20
-RB25 neo stock Oil Filter block/warmer $100
-RB25 neo Thermostat housing $40
-RB25 neo Power steering pump and bracket $170
-RB25 neo AC compressor and bracket $150
-RB25 neo top cam gear cover $50
-RB25 neo Flywheel needs machining $50
-RB25 neo thermostat (good working cond) $20
-RB25 neo metal coolant lines (under plenum) $50
-RB25 neo stagea engine mount brackets $100
-RB25 RWD oil pickup $40


R32 GTST PARTS
-R32 genuine nissan clutch master cylinder (brand new never used) $100
-R32 Stock Rear Camber Arms $70
-R32 rear handbrake lines x2 (rear sections) $80
-R32 slotted front rotors (used but still life left in them) pair $80
-R32 standard rear rotors (used but still life left in them) pair $50
-R32 coolant overflow bottle lid $15
-R32/33 drivers side power window actuator (good working condition) $80
-R32 rear hicas rack (no tie rods) $70
-R32 rear hicas solenoid $30
-R32 Space Saver Spare Wheel in good condition $100
-R32 Standard Front Seats with rails pair $200 or $120ea

R32 GTR PARTS
-R32 rear ABS Actuators $70
-R32 rear handbrake lines x2 (rear sections) $80
-R32 Bare cradle with no arms $50
-R32 rear stock camber arms $50
-R32 rear traction arms $30


R34 GTT Parts
-R34 Engine mount brackets $100
-R34 Tail lights left and right $280
-R34 Fuel flap (needs painting) $50
-R34 standard Front sway bar (with good links) $50
-R34 Front castor arm mounts $70
-R34 Manual gearbox crossmember $70
-R34 Front reo bar complete (cut to fit intercooler, white in colour) $150
-R34 Charcoal canister $30
-R34 Bonnet support bar $50
-R34 Bonnet hinges $40

-R34 Front subframe bare $100
-R34 Stock front castor arms $70
-R34 Stock front camber arms $50
-R34 Stock front adjustable strut brace (rustyt, needs paint) $50
-R34 Cusco front coilovers base height adj (one leaking. good for parts) $70
-R34 Engine mounts $100
-R34 Front guards (small dent on one and wheel arch small bend, needs paint) $70
-R34 AC condensor and engine bay piping $200
-R34 dump back 3'' mild steel exhaust with decat and oval stainless rear muffler $100



MISC
-Z32 AFM PLUG $20
-Z32 AFM, pod filter and plug $170
-Genuine Bee R rev limiter $250
-Apexi power intake Air filter (genuine) brand new $80
-set of 6 bosch ev1 pigtail plugs $25
-SR20DET Fan clutch/hub $50
-RB26 Clutch fan in gd condition (fan + clutch) $100
-RB25 standard Gearbox shifter $50
-Blitz SBC Boost Solenoid $80
-HKS GTRS RB Turbo, comes with dump pipe to suit, braided feed lines, return line and elbow (in good working condition) $1400

Edited by freestyleMX

You wouldn't have R34 manual gear shifter surround by any chance?

No unfortunately I dont.

Thanks

How old is the Z32 AFM, & how much for just the Z32 AFM and plug?

Not sure on age, but is in good working condition, the filter is pretty much shot anyway but would want $170 for the lot still.

Thanks

  • 2 weeks later...

-R34 Cusco front coilovers base height adj (one leaking. good for parts) SOLD
-HKS GTRS RB Turbo, comes with dump pipe to suit, braided feed lines, return line and elbow (in good working condition) SOLD

-Z32 AFM, pod filter and plug SOLD


Also added

-Z32 AFM, pod adapter, K&N filter and plug $200

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Next pic will probably bring back Charlie's PTSD So yes, pump is back out. I hooked the fuel return up to a hose into a container to flush out the first litre or 2, jumped the Fuel Pump relay and.......nothing.... Turns out the pump I had pulled out, checked, cleaned everything....was dead.  I hadn't actually hooked 12v to it to check it worked before I put it back in. Anyway...Neil had kept the old pump which still worked, so I just swapped it back in. All good, flushed the lines out, ready to start
    • OK....so something that works like it said on the tin! Fitting the pressure feed into the car was an absolute PITA because the oil filter is in the standard location and then there is a fitting to run to the oil cooler. On the other side between the filter and the steering box is the standard oil pressure sender (not working for some reason, something to check) and 2 tapped 1/8 BSP threads for the oil temp and pressure gauges. Unfortunately it is really tight in there and it took a hours of stuffing around to get a t fitting to connect the priming pump and retain the gauge sender.  Also, the Aeroflow sump has some massive drain plug (needs a 32mm spanner) so I couldn't use the regular fitting there either. In any case....once it was all hooked up, like magic priming.mp4 15 sec, 3 bar of oil pressure. Left it running a couple of minutes to push through everything, looked good   
    • Yeah the latest style kit has been trouble free, I've done a fair few klm on it including pushing a bit on low fuel and it hasn't been surging (that's not an endorsement for race use, I haven't tried that low, or that hard cornering!). For street use it has been a good thing, handles the high current OK, only real issue is it is not cheap
    • So, how do you feel about the Frenchys surge tank setup @Duncan? Have you had a chance to try it out more? The sketchy wiring in my fuel pump setup has decided to melt and die and I'm looking for a solid replacement now. My fuel hat is toast so the Frenchys kits providing it all look promising.
    • Yeh... literally every time i jump on a forum, see an instagram post or see an engine bay at a car show, i get an idea and add it to my 'to do' list. So what started off as, hey can u just make a couple of intake hard pipes because my dumbass bought the wrong apexi kit, blew out into a 2 week job including braided brake lines & custom bash kit for the front lip haha.  Getting Luke from A4E engineering to make a full custom exhaust with a controllable aes dump valve so i can actually switch between quiet and loud, because right now its just loud all day every day. Then after that go and get the tune redone flex e85 & 98 as i get bugger all milage from e85, makes going for longer drivers difficult
×
×
  • Create New...