Jump to content
SAU Community

Recommended Posts

Slowly chipping away at it. Got the hole cut for the cooler piping and cut off the vband on the comp cover. 3.5" piping is going to be a bit of  struggle to fit under there as the tyre is fairly close to the guard already when full lock right. We will see tomorrow while the sun is out what exactly we are going to do.

FyfMW49.jpg

chq1aqv.jpg

We also tacked on the bends to mount the gates onto the manifold. Front one is going to be very tricky but I think we've found the best spot for it. See how we go tomorrow have even have it tacked up. 

  • Like 3
  • 3 weeks later...

Not a lot happening lately. Got myself a new car so been enjoying that. Just waiting to recoupe some money so i can get the last bits and pieces to finish her off. Our 4" bends arrived yesterday, so gates will be welded on this week and should hopefully have atleast a dump pipe. 

Zh83Ukr.jpg

Here's a pic of the rig from last weekend up at Double Island.

x2eKaER.jpg

  • Like 1

Some good progress today! Went down and picked up some fittings for the surge tank so we can finish the boot. The bulkheads are all fitted and ready for hardline to go on. Got one on today that came up ok. Might redo it and just use 90s instead of weird angles.

s76Dkkr.jpg

We have also been designing this powersteering bracket for a few weeks doing multiple tweaks on it to get it perfect. Won't be long till its the final result, just have to clean up the 3d printing a bit for a nicer finish and replace the bolts with buttom heads to clear the bonnet.

WgSO0w0.jpg

Also got all the pieces together for the dump pipe. Just gotta wait till monday to get a 4" flange and gasket to put in and then we can continue on with the exhaust. Also welded in the wideband bung aswell. I'll probably get around to mounting the can lambda sensor to the firewall as well as the 4port solenoid next week. 

t1ZWZ0W.jpg

TZ3jI3A.jpg

gsxJK7U.jpg

  • Like 2

Little bit more done today! Surge tank is all plumbed up ready to go. Not 100% happy with it but it will do. Hopefully nothing leaks! Fuel system is almost all done now bar lines into the rail. Just need to hook up the 2 lines under the car to the hardline and shes good to go and run a braided line from the hardline to the fuel reg. Just need a couple straight fittings. 

yh84lBL.jpg

Mounted and wired my boost solenoid as well. Catch can will keep it hidden nicely. Also have to try and mount my link wideband module somewhere in there aswell. 

t60DLlM.jpg

vIZglgh.jpg

Car is slowly coming along. Converter should be ready sometime this week. Ordered Hypertune gear today as well, v2 Intake Manifold with some special colours, and 600x325x100 Intercooler and 4x 3.5" hypertune clamps. Should be ready this week/receive early next week.

  • Like 3

Fuel system is finished now! Except for rail anyway. Got a heap of fittings today to plumb catch can, turbo oil feed and drain, head drain and few other bits and pieces. Oil feed is done, and one side of my can. Gotta go change a couple fittings and ill finish plumbing it all up tomorrow. 

Also gotta try and work something out for my heater. Not a big fan of those big brass fittings on there atm. Hopefully find something so i can run black fittings on it. 

dxp8XHC.jpg

jrrKx8v.jpg

BXo4kAL.jpg

 

  • Like 4

Went and got some fittings today to finish off plumbing up my gates and catch can. Here is the final results. 

DRwKOOC.jpg

4mg5ePR.jpg

JbysXHc.jpg

WzX1B89.jpg

ONeyqnH.jpg

e0Cgyye.jpg

Tomorrow I have to get a few more fittings again fml, always forget something. Been down everyday this week so far. I have sorted fittings for coolant/heater path just need to swap the hose end to something bigger as it was too small for the heater hose. And I need to get some more 200series hose and a couple of fittings. That should be everything until we have to plumb up the fuel rail and plenum. 

  • Like 1

Finished the turbo drain and coolant hoses today. Come up pretty nicely, ive just gotta get some hose clamps and mount them to the firewall as I've deleted the factory plastic mount.

Mate also finished welding up the dump pipe as well. Got a super high flow cat being made up tomorrow and I'll grab a couple flanges and we can keep going with the rest of the exhaust. 

Plan is to finish the exhaust off and finish welding everything up on the manifold so we can pull the motor out to fit up intake manifold and head drain. Drop motor back in see if it runs and no leaks then fab up intercooler piping which shouldnt be too bad. 

xGH7NZW.jpg

jPDuorR.jpg

oCkP0Gt.jpg

Q1qi8ff.jpg

4okO0zt.jpg

  • Like 4

Few little small things done today, cleaning lines and double checking over stuff. Surge tank is now 100% put clamps on pumps inside tank and put the oring in.

Got my wideband module mounted nice and stealthy location. Next week I've got to pull through 4 wires for it and get my mate to hook it up into the ecu.

n2F3OzL.jpg

sZ3aJm8.jpg

Pulled my booster off aswell and dropped it down to my painter. Had it back in a couple hours. Flipped it aswell so theres no big dirty hose running across the top. 

WtVqN47.jpg

Finished off FPR. Line will get connected once plenum in is. Also threw a hose clamp on the hardline to give it a bit of support off the body.

ZsfOmdN.jpg

Custom cat got made up today and went and picked that and a few flanges up and got stuck into the exhaust. Dump pipes all welded up now.

Eh3oV6o.jpg

Jks lol fake cat!

GQKDQgd.jpg

We have made up the next little part of the exhaust but unfortunately exhaust shop only got sent the 3 instead of 4 flanges. So monday we'll get the other flange and also the magnaflow muffler.

  • Like 2
8 hours ago, UWISSH! said:

Reason behind mounting the wide band stealthy?

 

Loving everything in the build. Should be a wild ride once complete

Want to keep the bay as clean as possible and clutter free. 

Cherrs mate, can't wait to drive it!

Went down to the shop and got a bit more done today. Gates are almost complete. Just need to get some more pipe to replace the straight bits and make them a bit longer. Once that's done we'll weld them all up and finish welding everything on the manifold and send it off for coating. 

Got some billet clamps for the -3 fittings aswell. Looks shit hot compared to a ziptie ??

Also got the 90 welded onto comp cover and hole cut a bit bigger to suit. Gotta wait for hypertune gear to come so we can work out what we need as there will be a clamp going before it 90s down.

OZNlQYS.jpg

SOUU7xO.jpg

sQIJjBP.jpg

  • Like 2
10 hours ago, Taha said:

Top build do you know what  a 3.4 can rev 2 as I'm thinking of going spool 3.2 or 3.4  

We'll only be revving it to around 8500rpm, depending if it's still making power or not. I know JEM rev's theirs 9500rpm. 

Exhaust is almost finished! It's currently all tacked together, so tomorrow it will be getting welded up, along with fixing up the screamers. Exhaust turned out awesome. Mate wanted a cannon not an oval muffler so I got a cannon to put on. 

Surprisingly the 4" system sits up really nicely! It's probably got about 140mm clearance under it. It does have stock suspension though.

This weeks game plan is tomorrow pull box off and get measurement for new converter then that is ready, finish welding up exhaust and manifold then prep motor to come out for head drain. Thursday take mani off to get coated, install head drain and plumb to sump.

Going to order a spal 16" 3000cfm fan to put on my current rad that will bolt onto the hypertune radiator when I get sround to getting one. Hypertune said they should have stuff to me next week. 

Next week will be a bit of a push to get it all done rear for roll racing on saturday but we will see how we go.

SWaXR58.jpg

gZDOjpk.jpg

QzWuR6T.jpg

HJGN2Ng.jpg

sgtHZbB.jpg

  • Like 3

Not much going on at this point. Pulled hot side out and welded up the mani and sent off for ceramic coating, should be back mid next week. 

Pulled the motor out yesterday to do the head drain and also fix the heater hoses to the wall then dropped it back in. Everything is getting bolted in now for good.  

8n3Ddxb.jpg

hMHmlSF.jpg

Might head down today and finish welding the exhaust and wire in the wideband and a few other things to get it ready. 

Little bits and pieces to sort out here and there. Have to mod powersteering pump and bring it forward to suit the rb26 ATi damper and also work something out to bring the powersteering hose straight off the pump to run to the resi in it's new location. 

Had a couple dramas with the gearbox situation... My new converter has been made but my converter height I need is too small for him to finish it off. So I need to source an rb30 jatco bellhousing which is about 20mm longer than my rb25(?) one and possibly an adapter to suit. Then have to my tailshaft shortened to suit and remount the gearbox. Probably dreaming a bit to get it done by next weekend now... Also still waiting in hypertune stuff to rock up. 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Pfft. As if I'd ever point a high pressure washer at my car.
    • The nature of my commute has changed. Way back then it was traffic lights all the way, for ~28km. It sucked. When they finally stitched the expressway together I could do a good 15+km of it at a steady 80-100 with no stopping. That alone has gotten me down to flat 10s. Prior to that it was mid-high 10s. I can't remember the delta that I saw when I got the idle down. It was only ~150 rpm, because the idle speed was never terrible, but for the delta in consumption to be noticeable it would have had to have been at least 0.2-0.3 L/100km - which is not to be sneezed at when it comes for absolute free. It's only about 50L per year, but that's ~$100. A few extra pizzas is always welcome. Note that I have a record of every tank of fuel that has ever gone through my car except for a handful put in by someone else, like my mechanic. I can show you the difference between stock RB20 and tuned RB20, stock RB5Neo and tuned, winter and summer fuel blends, winter and summer fuel blends when the ambient temperature is not appropriate for the blend, working O2 sensor, blown O2 sensor, boosting f**k out of it and frightened to boost it because it is pinging, and so on. OK, I probably can't do all that now with 100% clarity - but at the time when any of those things were in event, you could see it in the records. There's 25+ years of simple tank after tank records, so you have to look for landmarks to work out approximately how old any single record is. What's really important is the meta data and that lives in my head.
    • If you're claiming the issues are not skyline specific, then either the USA is living in the 90s / early 2000s, OR you have the issue of "survivor bias". Which is you're mainly hearing and listening to those with terrible experiences, and haven't found the guys who have cars with good decent builds and no problems. It happens in AU too, that plenty of people keep having issues, and they keep going to the workshops that are known to be shit "because I read on the internet". Even worse, are those who keep posting on the internet as though they know for a fact what something is, when they've never touched/looked at said item in their life, and again are making assumptions, based on something they read, or because it's a certain way in other cars. It's even funnier when those same people debate the facts with the people who've lived and breathed this stuff for over 15 years. Example, I've had someone tell me you can't do something with a Skyline, because they read it on the internet, except I can tell they're wrong, as I did that exact thing back in 2008 with my Skyline.
    • The funniest part I saw, was someone would bitch and moan on FB about something, Andy would be the one to respond, asking for more info, if he could contact them, what the engine setup is, what their config file was, and 95% of the responses were people just going "der! It doesn't work" and Andy going "What doesn't work?" And then going "The firmware!" And they'd go around in circles as no one could ever give information, and Haltech couldn't fault things on the bench, (especially when people wouldn't give any specifics).   Many moons ago, when Andy was back at e420c stage, he reached out to me, and asked me to test different plug and play looms for him (already had an e420c in the car on his V1 PNP loom). And he kept asking me, as I was competent enough to be able to give him some specific feedback on what was/wasn't working, how to replicate the faults etc, and work through things with him. Most people are terrible at answering the questions they're asked, or being able to provide quality feedback other than "it doesn't work".
    • I say it often, none of this stuff is really Skyline-specific per se. But in general there's not a lot of people who actually know what they're doing. A lot of people charging like they do. Agile software development probably isn't the greatest idea for an engine controller.
×
×
  • Create New...