qld Brembo Brake Upgrade - R32 Gtr

[deongster]

16 hours ago, Duncan said:

I'm very happy with my similar setup on the race car, I've run up to 1hr enduro races on them and targas etc with no issues. These are a bargain at the posted price even if they need a reco

Pads easy to find? Good ones? or need some searching around?

[Duncan]

I had less options than when I was running the 33/34 Brembos, for instance I could not get my preferred hawk ht-60, however there were still plenty of good brands to choose from; Winmax, Pagid, SBS are ones I've used in them. Its a pretty common porsche caliper not something wierd

 

[deongster]

I had less options than when I was running the 33/34 Brembos, for instance I could not get my preferred hawk ht-60, however there were still plenty of good brands to choose from; Winmax, Pagid, SBS are ones I've used in them. Its a pretty common porsche caliper not something wierd
 

Thanks Duncan. Will definitely have a think!

[BunsenBurna]

Minko the forum tells me you can't receive messages!

[Minko]

2 hours ago, BunsenBurna said:

Minko the forum tells me you can't receive messages!

Have deleted some messages - hopefully works now?

 

No issues with brake bias, car was run on street, circuit, street sprints by myself and previous owner and setup was perfect.  

 

[V28VX37]

On 11/01/2017 at 8:10 PM, Duncan said:

I had less options than when I was running the 33/34 Brembos, for instance I could not get my preferred hawk ht-60, however there were still plenty of good brands to choose from; Winmax, Pagid, SBS are ones I've used in them. Its a pretty common porsche caliper not something wierd

Duncan sorry to bombard you but since you're the expert on this setup, have you run this ok with ABS?

Also with the dog bones/adapters, any chance they would suit R34 GTT or would you need to re-drill or re-tap them or the uprights? From memory R32/33 might be 12mm bolts whereas 34 is 14mm (or vice versa)?

[niZmO_Man]

R34 = 14mm so you'd probably have to do some drilling.

[BunsenBurna]

Is there a local (AU) rebuild kit supplier? I can only find one in the US or UK,,,

[Duncan]

c'mon guys this is a for sale thread not a brakes discussion. I wanted to add some information which might assist the sale but seriously, at $800 this is an awesome deal.

I still run ABS in the race car, I have no balance problems or ABS issues although I have chosen to run different pads front and rear.  The seller would have to confirm details about the bracket but the one on mine is an excellent piece of 5mm steel angle. Obviously I don't know bolt size on this sale but if it is larger than your hub (ie M14 into M12 hub) you could drill out the hub easily, and if the bolt is smaller than the hub size (ie M12 into M14 hub) then you could do nothing (because it will be fine once torqued) or use 12-14mm sleeves if you are concerned.

[BunsenBurna]

At least one offer has been made pursuant to the recent discussion so good result I'd say...

Seal kit anyone?!

[V28VX37]

At least one offer has been made pursuant to the recent discussion so good result I'd say...
Seal kit anyone?!

See page one of this thread for the seal kit

[BunsenBurna]

Thanks mate...major blind spot by me in the excitement whoops 

[BunsenBurna]

Minko did that PM come through?

[BunsenBurna]

About to send another PM Minko...

[BunsenBurna]

Still keen / PM'd / ball in your court Minko!