Jump to content
SAU Community

Recommended Posts

Previous owner was a mature lady owner who imported it and who owned it for around 5 years.

Here are the details:

Interior:

the interior is very clean with only a single slight mark on the rear seat that is almost unnoticeable

Power windows

power steering

power mirrors which fold back into the car so that they dont get damaged

air con only needs regassing

kenwood equalizer and cassette player with a 10 cd stacker in the boot

automatic digital climate control

blitz turbo timer

fully electric sunroof with open/close and tilt up and down feature

all the electrics work perfectly

Engine:

2.0L six cylinder turbo

automatic

145,000 klms with a full log book service history (serviced every 5000kmls)

mechanically a1, drives wonderfully

cat back 3" sports exhaust with a large tip, but everything else is stock

4 brand new brake pads

i have never boosted the car, and it is never flogged

Exterior:

The paint is in very good condition with just the usual little scratches and marks because it is a daily driver, but overall, it is very good paint.

Red/maroon

bodykit with a front bar, side skirts and a rear spoiler (i think the rear bar is stock)

driving lights

17" mags with a chrome deep dish (look really good)

4 near new 235 tyres on each corner

camber adjustment kit so that you dont chew through the tyres

window tint

slimline weather shields that stop the rain coming in the car with the windows down

Now the couple of bad things:

it has a small (10 cent piece size) piece of rust near the back window. Very small though.

There is a little rust on the edge of the sunroof because the rubber just doesn't seal perfectly against the opposite surface. The sunroof does not leak whatsoever though.

This really is a great car, that runs wonderfully and without a problem, but it most be sold! I have got another car and now the skyline just sits in the garage.

The car is registered until March 29th 2005.

The car is located in Murwillumbah which is on the east coast about 30 mins south of the qld/nsw border or about 1 and 1/2 hours south of brisbane.

Price: I'm only asking $11,990 for the car, because it is just sitting there not being driven (i have bought another car)

*updated* Price drop now down to $10,500

Thanks guys

Link to comment
https://www.sau.com.au/forums/topic/46443-fs-92-r32-skyline-11990/
Share on other sites

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

The rego is NSW, and i will only be selling it registered.

Yes, i forgot to mention, the suspension is all standard and rides excellently.

I will send through some pictures of the rust hopefully this arvo and also post them up here.

Thanks

Hey im very interested in the car..

Can i get ure number to contact u to come see it..

Iv just sold my car and i have money to spend :D so i am a serious buyer.

or contact me if you could .. i would like to come asap ..

Call aaron on 0413334932

cheers

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Thanks for the reply @GTSBoy Haven't really thought of that yet, but you are right. If the hose was damaged it should be absolutely pissing by now. I'll put some heat sleeve around it for good measure since I'm already removing the line anyway.  Maybe I'll put on some of the stock hardlines if I ever fully remove the turbos again. Maybe when T51R modding the compressor housings? Might be a fun mod on GT28s for that "fake single turbo" effect.
    • Update 1: I did some work on the car already before finalizing this post and my "issues" list. I dropped the Tomei exhaust in favor of the HKS Hi Power Silent. Sounds nice and I can actually hear myself think now. Also gives me a realistic chance to legally drive without silencer inserts. A bit of cheating was necessary to still be able to mount the Top Secret style diffuser. Some malusage of washers and a bit of "convincing" toward the brackets and exhaust hanger seemed to do the trick. The shaky steering wheel has been resolved as various suspension components were worn, like sway bar bushings and link bars. Most notably the two steering tie rod ends. Had some trouble finding bushings because my sway bars are not OEM thickness, 23.x up front and 27 rear. But non adjustable, so no aftermarket I suppose. Maybe they are nismo units? Turbo oil drain hoses were definitely still the originals and are new now. Wasn't the cause of the turbo oil leak sadly. Currently removing the rear turbo because of it, I suspect the braided oil feed line is the culprit. This issue needs to be dealt with so I can work towards actually getting the turbo setup legal and inspected. Two new issues to add to the list as well. Rear Main seal is probably leaking. Time will show how bad it is, I don't really want to drop the gearbox right now just for the stupid seal. Could fix a few other things in one go once I do that. Front right driveshaft grease is going past the cv boot, so at some point I'll fix that too.
    • Ok so no 4cyl clutch... Yeah it is a factory manual. So if iam correct i need clutch and flywheel too? I can use something that suits something like R32 GTST?   EDIT: https://www.ebay.com/itm/224291042776 Is this ok?   EDIT2: i maybe forget to mention this(dk how important it is) but the trans will be behind RB25DET NEO(iam doing swap) It will be there for a little while. Iam planing to do bigbox or BMW tranny..
    • You're probably right about that one. Thanks for your suggestions, I hope I don't need a new 3rd brake light. Although wiring issues might arguably be worse. Right now I'm in the midst of a turbo removal because of my oil leak, other problems are going to have to wait for now.
    • Hell, I know that much. So far I just put it off as "part of the deal".
×
×
  • Create New...