Jump to content
SAU Community

Recommended Posts

TEIN

SUPER STREET DAMPER KIT

(Height & 16 steps Dampen Adjustable

Anyone hear about that? is that very good for the car on the bumping road? This product is fully compatible with TEIN EDFC (Electronic Damping Force Controller). Has anyone use that EDFC with TEIN suspension. I mean is the EDFC can change the damping force between like standard soft to Racing hard?

Tell me more information about it, I'm planning to buy one.

Link to comment
https://www.sau.com.au/forums/topic/46448-wanna-know-about-tein-suspension-kit/
Share on other sites

I have TEIN FLEX coilovers and EDFC installed on my R33 GTR.

I love it. On the softest setting, it is no harder than standard R33 V-Spec suspension, yet on the hardest setting it's really only suitable for the smoothest roads and the race track. Even on the racetrack I wouldn't use the hardest settings (I'd use 4 front/5 rear on the EDFC - 0 hardest - 16 softest)

It's actually user selectable 16 or 32 steps dampening adjustable, but I have it on 16 adjustment points as it's more than enough really.

I, like my old buddy Merls, have Teins on my R33 GTR. I actually have Ohlins on my R34 both height and damper adjustable BUT I actually prefer the teins and I have just received a brand new set of Tein coilovers for the R34 GTR which I am replacing the Ohlins with, they are that good. Having said that my Teins are HA's which are quiet a but stiffer than the super street so if your looking for a good street ride then I think you are going for the right option.

Also if you check the tein site (tein.co.jp) you will find the spring rates for all tein models.

so you guys don't mind the teins, i have a silvia and many on the silvia forum say that teins are just too hard for daily driving, i am putting a rb25det in, in summer and need some new suspension, was thinking of either tein or cusco coilovers, but been advised against tein because of roughness, possibly this differs from the differing designs btween the skyline and silvia, just interested.

so i guess for both Aya and i am asking this because me girl aint going to be happy with my riide being super hard although i want something harder than standard.

thanx

josh

I agree with whiteq's, coz my gril just warning me that if I buy the suspension like a very uncomfortable one. She gonna be very angry. So if I buy that suspention and also with the EDFC, as like Merli and jezzrrr said can change the damping force to be softest. The soft feeling is same as the standard suspension? If that is, I will buy it. Coz the factory suspension in my R32 is nearly finish. Gonna change soon.

Thx guys!

:spcow:

What do you want me to say? How can I explain in words how the ride is? Go find someone with the suspension you want and go for a ride.

All coilover packages are hard. That's what they're for. If you want to appease your girlfriend's butt, get normal springs and shock upgrade like the Whiteline kit. That will be harder thand stock but softer than coilovers... It won't handle as well as a harder coilover suspension setup though.

With caution in mind (and not wanting to start a debate/argument) I have to say that all coilover packages arent necesarily hard and they are not designed to be hard, they are designed with ease of height adjustment in mind. If you choose spring rates carefully and have other suspension supports like sway bars etc in place you can acheive good handling with a reasonably comfrotable ride.

:spcow:

It won't handle as well as a harder coilover suspension setup though.

Harder does tend to make the car feel as though it handles better, but it doesnt mean the car will have more grip.

Shock and spring is there to ensure the tyre maintains in contact with the road, running springs/shock to limit body roll doesnt mean that the car can then do all the other things it needs to do well. Things like getting good power down, brake well, corner and change direction.

Stiff susp does make the car feel real agile though, a benefit when our cars can sometimes be up around 1500kgs :(

Harder does tend to make the car feel as though it handles better, but it doesnt mean the car will have more grip.

Shock and spring is there to ensure the tyre maintains in contact with the road, running springs/shock to limit body roll doesnt mean that the car can then do all the other things it needs to do well. Things like getting good power down, brake well, corner and change direction.

Stiff susp does make the car feel real agile though, a benefit when our cars can sometimes be up around 1500kgs :(

100% agreed, I am a big fan of stiff suspension, however if youre not dont avoid coilovers because theyre simply not made to be hard.

I have 5 sets of springs for our R32 GTST, they range from 180 lbs (3kg/mm) up to 450 lbs (8kg/mm). All of them are "coil over" springs, they fit on shocks with adjustable lower spring seats for height adjustment. I have a set of "non coil overs" in another of our cars that are fitted wiht 325 lb front springs. So saying "coil overs" are hard and "non coil overs are soft" is abviously not the case. That's the advantage of coil overs, I can have whatever spring rate I want and I can adjust the height of the car to compensate.

All I need to do is make sure the shocks have sufficient damper adjustment to control that range of springs rates. :D

True, but in general, spring rates found in Japanese coilover kits are much stiffer than those found in springs and shocks kits.

But quoting a whole range of springs is pretty redundant, unless they came as options with the off-the-shelf kits we are discussing... As we all know I could go get a set of 20lbs springs for my coilovers or 500lb springs for my non-coilovers...

Also you can get drag pro coilovers with softer springs too, so it all depends on what you want.

But quoting a whole range of springs is pretty redundant, unless they came as options with the off-the-shelf kits we are discussing...

That's exactly the point I was making, why buy a Japanese brand name set of coil overs that you have no choice of spring rates in? Better to buy a local set where you can choose not only the spring rate but the damper rate as well. Plus you get European shock technology, and all for a cheaper price. I'm with you Merli,

it all depends on what you want

True that! Don't forget the local made coilovers! Easier to get service for them too, when they need to be reconditioned!

Do you have any experience with DMS? I had a set of 50mm Giant Strut DMS coilovers on my old GTS-t, and they were magical. A little hard for everyday street use, but at Eastern Creek they were PERFECT. Full range of spring rate options available for your choosing too! :):D

:)

True that! Don't forget the local made coilovers! Easier to get service for them too, when they need to be reconditioned!

Do you have any experience with DMS? I had a set of 50mm Giant Strut DMS coilovers on my old GTS-t, and they were magical. A little hard for everyday street use, but at Eastern Creek they were PERFECT. Full range of spring rate options available for your choosing too! :D:(

:)

Yep, Jamie makes good stuff :)

newb to the forum here, i love the suspension section on this forum, its alot more indepth then any other forum ive been on, there all mainly on engine performance.. but anyways just had a quick question, ive heard very little of DMS before and forgot about them until now, but my question is besides whiteline and DMS, what other local options do we have that you guys talk about ?... in terms of suspension ie coilovers

oh btw aya, how much they end up setting you back ?

  • 3 months later...
Thx Guys! I will buy the TEIN Super Street Dammper with the EDFC, I read a part of the GTR magazine. it says that suspension works very well. Also its cheap. hehe....  

thx Sydney kid,merli,jezzrrr, roy and whiteq.

Searching around for info on this product and found this thread.

Let me know how they are when you get em!

Thanks dude

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update: Tunehouse looked into the problem and identified a wiring issue between the camera unit and the connector. They managed to get it working , but did warn me at some point it will stop working again. From their perspective it is unserviceable and will need replacement. They did some research and found that the new replacement camera would be Approx $1400 supply only (their fitting cost would be $190) . They did provide the part number (28442-JL05B) and a quick google of the part number shows that these are rather expensive brand new (seemingly no longer in manufacture) for the places that still have them in stock, with the used option potentially presenting  the same issue down the track at some unknown point. They are happy for me to supply the part so that they can fit it. Decisions, decisions... I can definitely recommend Tunehouse (thankyou Vee37!). Cost for the diagnosis was as quoted  ($190) , car was ready on time and communication was top notch. Their workshop is super clean and modern, and there was plenty of car candy parked out the front on the day I went.   Would definitely go back.   
    • to fix the voltage drop issue I swapped out the old 150amp alternator which turns out is a brand known for having issues and replaced it with the black 180amp alternator beside it 
    • For anyone interested, the Way Back Machine has that Japanese website archived with pictures, etc: https://web.archive.org/web/20051023225805fw_/http://www.a31cefiro.com/air_con.htm "Simply swapping the wiring of the harness will not allow it to function properly. For the outdoor air sensor and sunlight sensor, disconnect the wiring connected to CN1-11 of the air conditioning harness from the harness and connect the sensor side wiring to earth. For the indoor air sensor, disconnect the wiring connected to CN2-3 of the air conditioning harness from the harness and connect the sensor side wiring to earth. The connector PIN numbers listed here are the genuine A31 PIN numbers. To avoid incorrect wiring, check with a tester before wiring. Also, disconnect the wiring in a location close to the sensor. The disconnected harness side wiring will not be used, so be sure to insulate it." Wish someone sold a conversion harness to just plug-and-play a Kouki 180sx digital climate control into C33/A31. I'm decent with wiring but feeling kinda lazy about taking this on. Edit: Did some more digging and found a helpful Minkara blog post about the conversion as well: https://minkara.carview.co.jp/userid/1831116/car/1360568/2284209/note.aspx "After installation is complete or the battery is replaced, you need to go into self-diagnosis mode and set the internal air recirculation. The way to do it is to "hold OFF with the key on for more than 5 seconds, set the number to 5, then press 卍→C." ↑↑↑It probably won't make sense unless you actually try it (・∀・)." Lol wtf
    • Maybe SAUNSW could see howany members would do a motorkhana day if Schofield's is still available for a reasonable price...
    • Skip the concrete, we just need to smooth a field. Mark knows how to drive a grader Duncan   I reckon 100x100 flat area for skid pan style, and then some sort tracks for rally... Duncan's already got a rally car on the premises to...
×
×
  • Create New...