Jump to content
SAU Community

Recommended Posts

Had a Haltec then a Motec M84 and went back to a PFC D-jetro.

The car has been running faultless ever since, no more timing issues and its a real plug in ecu.

Unless going a crank trigger I would stick with Nistune or PFC. They just work.

Put it this way.

I'd keep my car stock before a pfc again.

They are a complete waste of money. Nistune does everything it does.

And you may not want what a haltech does now, but if you do you have wasted time and money getting a half arsed ecu. May have well gone the good one from the start. Not to mention if you do get a power fc and take it to a well known tuner and they can't tune it that means more money down the drain. Let alone all the benefits a haltech brings.

I'll also point out the ecu is arguably the most important part of the car. What's an extra $1000 of you buy new? On the price of a motor it's well worth it.

Tl;dr pfc waste of money.

  • Like 1

Put it this way.

I'd keep my car stock before a pfc again.

They are a complete waste of money. Nistune does everything it does.

And you may not want what a haltech does now, but if you do you have wasted time and money getting a half arsed ecu. May have well gone the good one from the start. Not to mention if you do get a power fc and take it to a well known tuner and they can't tune it that means more money down the drain. Let alone all the benefits a haltech brings.

I'll also point out the ecu is arguably the most important part of the car. What's an extra $1000 of you buy new? On the price of a motor it's well worth it.

Tl;dr pfc waste of money.

I couldn't disagree with you anymore at this point. The higher power you go with Nistune, the worse the tune gets. O2 correction always trying to battle with the tune. I can name quite a few different people with GTRs that are considering swapping from Nistune over to PFC.

You want accurate timing with a Haltech, you kinda need a crank trigger, it jumps all over the shop without one. It's not "just an extra grand" for most people who haven't swung a spanner in their lives. PowerFC does the job, and it has been doing the job for the last 25+ years on THOUSANDS of high performance cars. You cannot possibly use confirmation bias just because you had a junk tune, and trash the ECU which thousands of people have zero issues with.

  • Like 1

There was nothing wrong with my tune, bit ecu technology has come a long way. The pfc was good. It's just not worth the $$ they ask for now. And yes it is $1000 difference and I have the receipts to prove it. You don't need a crank trigger so all.

Point is, why half arsed do something that will end up costing you more down the line. Just get a decent ecu to begin with.

Because 50% of Gtr owners realise the hole they have dug themselves within a year of ownership and sell up and cut their losses. The other half bend over and open up their wallets anyway, spending a little more than a small fortune. :P

Edited by iruvyouskyrine

There was nothing wrong with my tune, bit ecu technology has come a long way. The pfc was good. It's just not worth the $$ they ask for now. And yes it is $1000 difference and I have the receipts to prove it. You don't need a crank trigger so all.

Point is, why half arsed do something that will end up costing you more down the line. Just get a decent ecu to begin with.

You can get them secondhand for $400 if you wait long enough, average price is $600 for a GTR PFC. How is it half arsing? It'll go with your mods all the way up to 450kw very comfortably.. even more if you go D-Jetro..

You don't need a crank trigger so all.

Its a known issue that they have difficulty reading the cas signal which is hit and miss, just call haltec or Motec and they will clarify your error.

Point is, why half arsed do something that will end up costing you more down the line. Just get a decent ecu to begin with.

Where is a nistune or PFC half arsed? You just don't get the wank factor bells and whistles that you really don't need in a street car if the tuner knows what he is doing.

The only real choice to make is to stick with the AFM or go MAP. Apart from that Nistune or PFC will manage a 400kw+ car easily and perfectly.

Edited by XGTRX

You can get them secondhand for $400 if you wait long enough, average price is $600 for a GTR PFC. How is it half arsing? It'll go with your mods all the way up to 450kw very comfortably.. even more if you go D-Jetro..

dont go second hand.

The ecu and tune is the most important part of the build.

  • Like 1

If you've built a 400kw car you have obviously spent abit of money so why would you skimp on the thing that is going to keep your car running right.

Buy the best computer your budget will allow and make sure you get it tuned by someone with the correct knowledge to tune it correctly

  • Like 2

fyp. Have you never spoken to anyone who has bought a stuffed second hand ecu?

This isn't a missile car, this is a 400+kw R. Choose parts wisely and don't cut corners.

Yes and I've had a hand in building many of those cars. I could confidently say less than 10% of those who have gone second hand, have had problems, I'm talking 40+ cars here as well.

So 90% have had problems?

I rest my case.

Okay mate, I edited my post before you posted that but if you want to be childish thats fine.

Anfanee, what exactly is a platinum pro going to do over a PFC that your average joe shmo actually NEEDS? Go on GTR PARTS on Facebook and you can pickup a PFC D-Jetro any day of the week for $700. I don't see what the issue is here?

My point is. It's a much better ecu. And it's future proof. If you end up deciding you want the extra features that $500 tune may have well gone a haltech from the start.

Also AFM are shit.

You're right on all those parts you just said, I just don't think the average person needs it, 400kw isn't even anything fancy nowadays in the GTR world. Every third GTR in Sydney seems to be minimum 350-400kw. You buy an ECU to suit your application and in most cases a PFC is going to more than cut it.

On top of that... you should be listening to your tuner anyway. If he tells you he prefers to tune Haltech or PFC, then you should definitely be listening up!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This is for an RB20DET. Sorry for not including that. 
    • Welp, this is where my compression lands after my rebuild. Thoughts? I have ~6 hours on the motor. 
    • Well, after the full circus this week (new gearbag, 14 psi actuator on, injectors and AFM upgraded, and.....turbo repair) the diagnosis on the wastegate is in. It was broken. It was broken in a really strange way. The weld that holds the lever arm onto the wastegate flapper shaft broke. Broke completely, but broke in such a way that it could go back together in the "correct" position, or it could rearrange itself somewhere else along the fracture plane and sit with the flapper not parallel to the lever. So, who knows how and when exactly what happened? No-one will ever know. Was it broken like this the first time it spat the circlip and wedged itself deep into the dump? Or was it only broken when I tried to pry it back into place? (I didn't try that hard, but who knows?). Or did it break first? Or did it break between the first and second event of wierdness? Meh. It doesn't matter now. It is welded back together. And it is now held closed by a 14 psi actuator, so...the car has been tuned with the supporting mods (and the order of operations there is that the supporting mods and dyno needed to be able to be done first before adding boost, because it was pinging on <<14 psi with the new turbo with only a 6 psi actuator). And then tuned up a bit, and with the boost controller turned off throughout that process. So it was only running WG pressure and so only hit about 15-16 psi. The turbo is still ever so slightly lazier than might be preferred - like it is still a bit on the big side for the engine. I haven't tested it on the road properly in any way - just driven it around in traffic for a half hour or so. But it is like chalk and cheese compared to what it was. Between dyno numbers and driving feedback: It makes 100 kW at 3k rpm, which is OK, could be better. That's stock 2JZ territory, or RB20 with G series 550. It actually starts building boost from 2k, which is certainly better than it did recently (with all the WG flapper bullshit). Although it's hard to remember what it was like prior to all that - it certainly seems much, much better. And that makes sense, given the WG was probably starting to blow open at anything above about 3 psi anyway (with the 6 psi actuator). It doesn't really get to "full boost" (say 16 psi) until >>4k rpm. I am hopeful that this is a feature of the lack of boost controller keeping boost pressure off the actuator, because it was turned off for the dyno and off for the drives afterward. There's more to be found here, I'm sure. It made 230 rwkW at not a lot more than 6k and held it to over 7k, so there seems to be plenty of potential to get it up to 250-260rwkW with 18 psi or so, which would be a decent effort, considering the stock sized turbo inlet pipework and AFM, and the return flow cooler. According to Tao, those things should definitely put a bit of a limit on it by that sort of number. I must stress that I have not opened the throttle 100% on the road yet - well, at least not 100% and allowed it to wind all the way up. It'll have to wait until some reasonable opportunity. I'm quite looking forward to that - it feels massively better than it has in a loooong time. It's back to its old self, plus about 20% extra powers over the best it ever did before. I'm going to get the boost controller set up to maximise spool and settle at no more than ~17 psi (for now) and then go back on the dyno to see what we can squeeze out of it. There is other interesting news too. I put together a replacement tube to fit the R35 AFM in the stock location. This is the first time the tuner has worked with one, because anyone else he has tuned for has gone from Z32 territory to aftermarket ECU. No-one has ever wanted to stay Nistuned and do what I've done. Anyway, his feedback is that the R35 AFM is super super super responsive. Tiny little changes in throttle position or load turn up immediately as a cell change on the maps. Way, way more responsive than any of the old skool AFMs. Makes it quite diffifult to tune as you have to stay right on top of that so you don't wander off the cell you wanted to tune. But it certainly seems to help with real world throttle response. That's hard to separate from all the other things that changed, but the "pedal feel" is certainly crisp.
    • I'm a bit confused by this post, so I'll address the bit I understand lol.  Use an air compressor and blow away the guide coat sanding residue. All the better if you have a moisture trap for your compressor. You'd want to do this a few times as you sand the area, you wouldn't for example sand the entire area till you think its perfect and then 'confirm' that is it by blowing away the guide coat residue.  Sand the area, blow away the guide coat residue, inspect the panel, back to sanding... rinse and repeat. 
×
×
  • Create New...