Jump to content
SAU Community

Recommended Posts

Putting my feelers out to see if anyone is interested in my disassembled rb25/30. Starting to get over cars and my current rb25 is healthy still, this engine was going to be the last piece to the puzzle for my coupe.

Rb30 acid bathed, decked .008mm
New welsh plugs
Painted high temp silver
Honed to suit 86.5mm pistons
Crank balanced, polished and larger oil pump drive fitted.
Main oil returns drilled out to 10mm
Oil restrictors fitted. 1.2 mm from memory

Crank installed with kings race bearings and arp main studs. Bearings measured out to .038.

Rb25de head complete-off a good running engine. Cams, gears, covers etc
Was going to get it stripped, cleaned, checked and installed with new parts through out. Could slam it on with a quick clean if you wanted.

Below parts are to go with the block-bran new:
Cp forged flat top Pistons. 86.5mm
Timing belt to suit 2530
Second tensioner
Key ways
Crank gear

Used parts:
Rb30 sump
Turbo braided oil and water lines
Engine brackets
Rb25 balancer/water pump

All that is required is some h beam rods and some bearings and you will have a strong bottom end.
I'm not fussed if it doesn't sell, in all honestly I should continue with building my dream engine for this car but I haven't finished the car itself yet. Plus I need to draw the line somewhere as my life is only getting busier and busier..

$2500
Owes me a lot more. My loss, your gain.

Located in the Adelaide hills-SA

Link to comment
https://www.sau.com.au/forums/topic/464543-dissasembled-forged-2530-sa/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good tips, I like it! 😂😂 My wife is a LOT more frugal than me so it's only me we need to worry about! A splurge to her is buying 2 pairs of socks in one visit at Kmart!
    • Haha, the appropriate response to the question "Is this new?" is "I've had this for a while.". With the unspoken small print that a while may be the time since this morning or five years ago   And to be fair I learned that from the best, i.e. my wife. Because it goes both ways.
    • Yeah kids certainly add a whole another dimension to your life.  Life ceases to be about you and more about them for a while!  And I wouldn't have it any other way.  I love watching them play sport and make new friends along the way. Wow, sounds like your mate is a good guy to know!!!  He's got some serious toys in the toy box!  Yes it would be lovely to be able to do stuff to your car without getting all tied up in boring shit like how to pay for it!!  I would describe my spending style as "aggressively spontaneous and logical but regrettable purchasing"....  That will hopefully make no sense at all which would be appropriate given that is how I buy stuff.  I'll decide at the drop of a hat that I'm buying something expensive, research the living shit out of it for 2 days straight then go out and buy it.  Then I'll have instant buyers remorse for 2 days which generally passes by the time it turns up on the front step!  If I'm feeling ballsy sometimes I'll tell my wife.  Other times it just makes its way silently passed the house and out the back to the shed, never to be spoken of again...
    • My extinguisher mounted like this unscrewed a little (Maybe from the chair sliding forward) and dumped a bit of white on my mats. I'll need to get a more narrow one for future.
    • I totally couldn't do the whole kids taking up my life thing! 😮 I find it bad enough doing 45 hours in 4 days, and then fitting normal adulting life into the other 3 with no kids! As for my mates race cars, they're AMG C63 setup for production racing. The original is what has just been stripped and a brand new shell built. The original is then going away to have some panels straightened, then it will be put back together again. Then there's a third that will shortly head off to have a roll cage put in, then build it up too. And potentially a fourth to be built too... Oh, and he has two Renault Clio D class production cars, ha ha. And when he's not racing them in the Australians and QLD production championships, he's been racing one of Chaz Mostert's Lamborghini's in GT4. They just won GT4 at the 12 hour in the Lambo. We're pushing to finish the new AMG as it has its first round (and potentially its first shakedown/outing) in under w weeks for Round one of QPC, and that round is really the shakedown to make sure it's all good for the Bathurst 6 hour, which I'll be at too. Ha ha ha Working on my project is different to his, I slowly tinker and work ways to make things happen on a shoe string budget. Hes in a good position that he has a massive workshop full of parts and tools, ha ha. He also looks after me. When his air compressor died, he just needed it working, so bought himself a new one and gave the old to me. Sand blaster unit too, and a 20t pressing. And pretty much all the shelving in my shed too as he upgraded all of his (the stuff he gave me is the expensive black Bunnings heavy duty stuff)!   I enjoy working on his stuff. No decision paralysis, and anything that's needed parts wise is just there. Plus, then I get to be hands on at the track in real racing, not just club day stuff.
×
×
  • Create New...