Rb25det Nistune

[Jonnoo]

Hey guys i have a z32 nistuned ecu.(free)

What do i need to do to make it work on my car?

R32 25 swap

I know the knock sensors are different, but what else do i change

Do i need a z32 air flow meter?

etc

[Scott Black]

https://www.google.com.au/url?sa=t&source=web&rct=j&url=http://nistune.com/docs/Z32_ECU_Modifications_Direct_R33_Plugin%2520V8.pdf&ved=0ahUKEwjYrK7y8MvMAhVFHaYKHRyVD2MQFggaMAA&usg=AFQjCNHPYhrNsFbbIq-BjtzZjbgbCap3Mw&sig2=3Ng6DuTFNwbkVE-GeIupyw

That should link to a pdf from nistunes website. Read that and ask if you have any more questions. If the link doesn't work Google nistune z32 r33 and it will be the first link at the top of the page

[Dose Pipe Sutututu]

also as long as your engine harness is from a RB25 you'll be fine. if you're using a R32 engine harness you'll need to swap 2x injector pins and run a VCT trigger into the engine bay

[Jonnoo]

It is already running the rb25 with a 25ecu

i am not sure what loom is in it.

the vct is already wired to pin 113 on the ecu.

I am not sure if the injector pin wiring has been changed..?

[Dose Pipe Sutututu]

map it out

[hy_rpm]

Send the ecu to nistune and get it modified to suit

You just have to let them know if you have a rb25 s1 or s2 loom

And your mods and they will also put on a base map to suit

So you can limp it to your tuners

Only cost less than $100

[Jonnoo]

Thanks for ur help guys