Jump to content
SAU Community

Front Sway And Bushes - Sizes?

KeeL

By KeeL,
in Four Door Family & Wagoneers

 Share

Recommended Posts

KeeL Rookie

KeeL

Posted
Posted

Attempting to replace the D-bushes on my front sway, which is stock as far as I can tell (M35). However, I have only found one resource on it... Forums here one guy mentioned it was 29mm stock. Ended up buying cheap calipers and checking it out to be sure and I got 30mm.

Have spoken to a few parts providers, such as eBay sellers and the Nissan dealerships service teams, and they all say the only sizes that are stocked are 26mm, 32mm and 34mm. What?!

Has anybody changed theirs before? Do I have to get a whole new sway bar at a size that actually has D-bushes made for it? Is there some tricky shit going on because I have the turbo AWD variant as opposed to something a bit more basic? What's the go? Any help would be much appreciated!

Link to comment
https://www.sau.com.au/forums/topic/465007-front-sway-and-bushes-sizes/
Share on other sites
Daleo Grand Master

Daleo

Posted
Posted

The bar is 29mm.

OEM rubber are fine, and only cost around $30 from Nissan. I've been using a set of these for years on uprated Swaybars for years with no issues.

Whiteline don't do a replacement in OEM size, but pretty sure nolathane do.

They also use the PTFE impregnated polyurethane which is awesome, and completely maintenance free. They require no greasing or external lubrication.

  • Like 1
KeeL Rookie

KeeL

Posted
  • Author
Posted

Thanks for the replies! I've been super lost on what to do about all this.

I'll definitely be contacting Nolathane. I've been to both Autopro and Autobarn this last week and they've only offered the 26/32/34mm variants. I've given them all the details they asked for to the best of my knowledge... Maybe I missed something?

Cheers :yes:

TCO Contributor

TCO

Posted
Posted

Are you looking for OEM rubber replacements or poly bushes? If you're just after OEM bushes you could try a Nissan spares at a dealership part# is 54613AL520 *some* are actually helpful and are happy to order parts (others not so much).

Alternatively purchase via Amayama etc.. Best to order a few items to make it worth the shipping cost (although i've found their shipping Japan->Aust warehouse to be very reasonable).

Other option is upgrade...

  • Like 1
KeeL Rookie

KeeL

Posted
  • Author
Posted

Here's to hoping I won't need them custom made!

TCO, anything will do at this stage. We're not 100% sure it'll fix my problem so the sooner I patch this up the closer I'll be to getting it resolved... Have you had experience with both? Any recommendations?

Good info though, really appreciate it!

TCO Contributor

TCO

Posted
Posted

What issue are you trying to resolve?

Nissan will be hit an miss depending on the parts guys enthusiasm (Morphett Vale guys are pretty helpful). I've bought a bunch of bits and pieces via Amayama, shipped from both UAE and Japan warehouses. Reasonably quick with replying and shipping etc.. haven't had any issues yet, just have to make it worth the shipping.

KeeL Rookie

KeeL

Posted
  • Author
Posted

Have a wobbly/clunky metallic noise from the front end that happens with every little bump in the road. Sounds like something is loose and banging against a rubber surface of some kind. I have a mate who's a 4th year apprentice but has minimal experience with imports, so we did our best at a self diagnosis lol. The previous owner was told it was his ball joints, but we checked those out and didn't look like they were the issue. Noise doesn't seem to be coming from that area when the car is jacked up and the wheels wobbled around. Figured we'd just replace the cheapest parts first since it's not a big deal if they don't fix the issue.

I spoke to the Morphett Vale Nissan parts guy, he was pretty helpful and providing him with the part number you gave made him pretty happy haha. They can get them in but it can take up to 3 months supposedly... Ringing around to see if I can get them sooner, elsewhere.

Daleo Grand Master

Daleo

Posted
Posted

Part number is; 54613AL520

You can see it below in the exploded diagram. You can also see it in EPCdata, and even order online.
The link rods are there too; there are 3 different pieces, left and right had arms, and a universal base piece that bolts into the lower arm.

Their prices are significantly cheaper for genuine parts than Nissan Australia.

http://nissan.epc-data.com/stagea/nm35/6835-vq25dd/trans/401/54613/

6ce72c48ce37b83634a35c5a2218ca6c.png

e2c5bb851b629d88e4c29b6ea4174422216c5120

  • Like 1
KeeL Rookie

KeeL

Posted
  • Author
Posted

Any chance you could help me with this? https://www.amayama.com/en/search/?q=54613AL520

I'm not sure what the order form is asking me. The top option suggests I'd pay for parts to be sent from Dubai to Japan I think? And the option below from Japan to Australia? Since I need 2 bushes, will I need to order 2 from the top and 2 from the bottom? Confused, haha.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Mistakes were made, my R34 Story

      By Duncan 路 Posted

      That's the thing....the basics of fuel and ignition are deceptively simple.....getting it to behave like factory in all conditions after airflow mods is way more complex. Newer cars like the V37 are all about modifying the standard ECU which is about a billion times more complex than they were 20 years ago, with a bunch of parameters affecting others
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan 路 Posted

      The larger TB I had on the SS was a pain to get to idle right, but, that was cable In the end they just raised the idle up a couple of hundred RPM so it was happy idling away either in gear or in park (slush box life) I'm curious on how my NC will idle with the new intake, larger TB, and cams that are currently going in/on, but I have faith that MX5 Mania will sort this "electronical" "black magic" out the best they can in the tune with a electronic TB Sometimes I wish I knew more about the intricacies of tuning, but most of the time I don't because I know it would hurt my brain 馃ぃ
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah 路 Posted

      That's the thing. Cam is smaller than before.. though the old cam was +6 degrees advanced. We're talking huge changes here, the narrowbands want to trim out 20% of fuel and pull the (wideband) idle to like 16.0 AFR or such. One side is a little more trimmy than the other. Think along the lines of ~20% to ~15-18%. Unfortunately my scouring of the internet hasn't really found anyone with this issue. People either just disable NB's or have them wildly different, where one is -20% and the other is +20 or 0 (i.e a sensor is just dead/wiring is just busted). Turning them off and relying on the base map only results in the wideband reporting at about 14.0 with the Varex closed. It'd be a little leaner (closer to 14.7ish) with the Varex open. I know I can just change the switch points so that the narrowbands agree with the wideband, but it's still odd. Both of them are reading voltage, it's just that they're reading quite high mv, in the ~800 region. It's just odd. This was with the IAT fudged to report it was about ~22 degrees which is my guesstimation of the temperature in the room. I have an OEM sensor ready to try tonight, which is slow and crap - but .. worked last time I used it. Sadly I am aware that idle tuning with the big TB is going to be a PITA and I look 'forward' to many hours spent stalling or stumbling idle or delving into drivability things.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy 路 Posted

      Probably the cam.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah 路 Posted

      The GTR strut brace clears the new manifold.. by about 0.5mm. So this means I need to buy an OEM GTT Strut brace (again), which will clear the new manifold, but not the bonnet vents. I guess I can sell the GTR Strut brace with the bonnet with the vents as a package deal as someone will need this one day. So my choices are vented bonnet but no strut brace, or GTR Bonnet with OEM brace (which I have to buy) but is bright red instead of the same colour as the rest of the car, which means the entire front end of the car will just be red until it goes back to paint jail. In other news the engine starts and doesn't leak. Why both O2 narrowband sensors think the tune is rich AF I do not know. The idle is also pretty shitty and my expensive IAT sensor from the USA is dead. The car sounds awful. But I assume or at least hope this is due to the many exhaust leaks, and the concrete garage it is in, sitting there with 0 intake bolted to it, and no bonnet or panels or anything to stop the induction/intake sound which is about 200db.
脳
脳
  • Create New...