Jump to content
SAU Community

Recommended Posts

Hi all

It's my first time posting in sau as i recently purchased an NA R34 with an aftermarket turbo.

First of all, can anyone recommend a good tuner (preferred specialised in skyline bnr34) in Melbourne? I would be getting the car retuned after fixing a problem that it currenly has.

Secondly, so the problem it has now is that it can rev upto redline on P mode but when driving the rev caps at around 3000-4000. Up to this point i think that either there might be something wrong with the AFM, or i have to install the aftermarket fuel regulator and fuel rail back into the car as i think it could also be the problem from the fuel pump. However i am no specialist in cars so if anyone of u guys can give me anyhelp that would be greatly appreciated.

The previous owner did told me about this rev-capped problem and gave me the aftermarket fuel regulator and rail, however i am not 100% sure if that is the solution to the problem so i am wondering if the problem can be easily fixed by a professional tuner/mechanic incase if it is something non-trivial.

Also, both the fuel injector and fuel pump are aftermarket and not stock, the AFM i believe is a Z32 AFM.

Cheers

Hi all

It's my first time posting in sau as i recently purchased an NA R34 with an aftermarket turbo.

First of all, can anyone recommend a good tuner (preferred specialised in skyline bnr34) in Melbourne? I would be getting the car retuned after fixing a problem that it currenly has.

Secondly, so the problem it has now is that it can rev upto redline on P mode but when driving the rev caps at around 3000-4000. Up to this point i think that either there might be something wrong with the AFM, or i have to install the aftermarket fuel regulator and fuel rail back into the car as i think it could also be the problem from the fuel pump. However i am no specialist in cars so if anyone of u guys can give me anyhelp that would be greatly appreciated.

The previous owner did told me about this rev-capped problem and gave me the aftermarket fuel regulator and rail, however i am not 100% sure if that is the solution to the problem so i am wondering if the problem can be easily fixed by a professional tuner/mechanic incase if it is something non-trivial.

Also, both the fuel injector and fuel pump are aftermarket and not stock, the AFM i believe is a Z32 AFM.

Cheers

Also that car sounds butchered.. stock RB25DE ECU with a turbo slapped on it.. don't dick about with the fuel reg or mixing and matching shit without an aftermarket ECU or at least a piggy back (as you have an auto)

Sounds like you bought a problem. Which is why the guy sold it.

Prepare to open your wallet.

hmm prehaps not as bad as u thought,I've had my mechanic looked into it and he thinks there's no big problem but it just take time to find this rev-capped problem,which is likely to be either afm or fuel related.

The car has GReddy emanage ultimate ECU since it's an auto as well as many other mods with over 10k receipts, so I am wondering would a professional tuner be able to diagnose the issue better for me?

hmm prehaps not as bad as u thought,I've had my mechanic looked into it and he thinks there's no big problem but it just take time to find this rev-capped problem,which is likely to be either afm or fuel related.

The car has GReddy emanage ultimate ECU since it's an auto as well as many other mods with over 10k receipts, so I am wondering would a professional tuner be able to diagnose the issue better for me?

Yes a tuner would be your best option

Sorry my bad for creating multiple threads.

Also, apparently Chequered Tuning doesn't tune emanages anymore. Is there any other suggestions? Thanks in advance.

I would suggest getting an Adaptronic e420D and splicing it into your loom to control injection/ignition and letting the OEM ECU control the automatic box.

That "rev cap" as you call it is actually a TP Load cut.. your ECU is going "wtf.. why is there so much air going into the motor, I'm cutting fuel"

Talk to Trent, tell him the bastardised setup you have and someone from SAU recommended using an Adaptronic e420D to make it boogie.

  • Like 1

I would suggest getting an Adaptronic e420D and splicing it into your loom to control injection/ignition and letting the OEM ECU control the automatic box.

That "rev cap" as you call it is actually a TP Load cut.. your ECU is going "wtf.. why is there so much air going into the motor, I'm cutting fuel"

Talk to Trent, tell him the bastardised setup you have and someone from SAU recommended using an Adaptronic e420D to make it boogie.

I tried, unfortunately the guys from Chequered Tuning said Trent wont be able to talk to me over this matter, as apparantly he doesnt get involve with emanage anymore ;/

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm not up to date on the latest, but for basic modifications like pod filter, lower springs etc you can get a modification permit at the time of inspection.  For more serious modifications you will need engineering.  Intercoolers used to fall into the mod permit rule but its been a long while since i looked it up.   Either way you will be able to get it registered, just a case of $300 vs $3k . 
    • Hi everyone! I’m the new owner of a 1996 R33 GTS-T, I’ve purchased this car over from Queensland and brought it to Western Australia and I’ve found that there is a hole cut out in the engine bay for the FMIC that enters into the wheel well (fender liners are in the boot). For anyone that has had to get their car over the PITS here, will this be a major issue?   
    • Yeah I've spotted this one too, whenever it's lotto superdraw week and I'm browsing car sales dot com for my new ride They must be dreaming, maybe it's worth 150k for the link to Brock?
    • 100% accurate!  We are a pack of know it alls....  But, I bet people go to you when they have a problem! I've been on a bit of a clean up rampage too over the past month!  I've thrown more shit in the bin over the past 2 weeks than I have in the past 3 years combined! Anyway, it's all good fun being different! My wife sometimes does not agree!  
    • ADHD in all form isn't about "can focus, or can't focus" or is hyper active or isn't etc.   It's all a dysregulation. Either time feels to be stationary, or time just vanishes in a split second. We are either under focussed on the task at hand (as we're over focussed on our surroundings) or we have no idea an atomic bomb went off beside us as we're so hyper focussed and locked in on things.   Not to mention the rapid fire thought process. What it takes a "normal" process to think up a solution to a problem, ADHD will be able to give you 5 different ways to solve the problem, and the pros and cons of each. While we can be highly impulsive and lack the ability to "control ourselves" we can also become paralysed with the inability to make a decision for ourselves. While most of us have an OCD like requirement for perfection, we lack the ability often to remain focussed to get things to a perfect state. Those with undiagnosed ADHD as adults, can often find the last part actually stops them ever attempting to do things that they have the ability to do, as the reasoning is often "if I can't do it perfectly, it's not worth doing"   As for projects... Ha ha ha, I still need to take the other half of my wall trim down in the Fiance's office so I can paint it. Need to finish digging and running the back yard drains, my R33, getting the Ninja bike registered (now being sold), the moped project, fixing either of the lawn mowers so they're reliable, along with a myriad of other things.   It's why I've been going through lately and just being brutal and clearing projects off that I won't actually ever complete. IE, moped will go to the tip, or be given away, bike is being sold, Subaru project being sold, some parts for other projects given away. Or I've been making myself focus on one thing at a time, by ticking off the smallest quickest ones first.   There's also a reason by our mid twenties we seem to be "know it alls", as we've all been down some of the weirdest and oddest rabbit holes when you follow the dopamine trail. It's often also why we're more a jack of all trades, but not a master of one.   However, pretty much all of my hobby projects, in one way or another, all come back around to automotive. That's my zen area.
×
×
  • Create New...