Jump to content
SAU Community

Recommended Posts

I have a Gtr r33 and looking to install the Garrett-5's. Installed already is the air intake and 3inch exhaust with a sports cat. What I will be installing with the turbos are: 1125cc Bosch injectors, tomei cams and camshaft, tomei dump pipes. My question is what the max spool on these turbos with the mentioned mods? (What RMP when full boost kicks in?)

What I would like to know if anyone has installed these on their Gtr r33 and their thoughts on this?

Wanting to use this on the street and track...

Thanks.

Edited by CU's GTR
Link to comment
https://www.sau.com.au/forums/topic/465154-garrett-2860-5-max-spool/
Share on other sites

The fuel will be premium fuel (98). Boost level is unsure of at the moment. If possible 1.5 bar. I've looked through forums but most talk about kw at the wheels. Not to concerned on that. I expect to produce somewhere between 300-350 kw at all wheels. Current set up is producing 240kw at the wheels.

I just want to ensure the right turbo is use for and not too much lag. If full boost is around 3500rpms this would be fine.

On stock engine and cams, -5 max spools at around 5000 rpm, with bigger intercooler, dumps etc max spool at 4500 rpm, unsure about cams(depends which one). I think it would be hard to get max spool at 3500 rpm with -5 on rb26, maybe able to bring it down to 4000 rpm if you get hard pipes everything and bigger exhaust like piggaz said.

The fuel will be premium fuel (98). Boost level is unsure of at the moment. If possible 1.5 bar. I've looked through forums but most talk about kw at the wheels. Not to concerned on that. I expect to produce somewhere between 300-350 kw at all wheels. Current set up is producing 240kw at the wheels.

I just want to ensure the right turbo is use for and not too much lag. If full boost is around 3500rpms this would be fine.

For 300-350 kw atw better off going with -9 and e85, it will be less laggy than -5. With -5 you will eventually need to go to 400kw to make sense.

Your never going to see full boost at 3500 with -5s it doesn't matter what you do

To get the best out of them tho

-Big exhaust and dumps (twin 3in into 3.5 minimum)

-Cam gears (no cams they send you backwards)

-Bigger and better intercooler (not an eBay Chinese special)

-E85 (makes a huge difference)

*increase your capacity (stroker or etc)

*vcam or the otomoto veriable cam system

The ones with the - should be on your list no matter what the * are if you can afford it, but a car with the entire list would be a weapon

  • Like 1

For 300-350 kw atw better off going with -9 and e85, it will be less laggy than -5. With -5 you will eventually need to go to 400kw to make sense.

but this is a better idea, my car with the stock engine and -7s makes 348kw on e85 and has fantastic response
  • Like 1

R32-25t, my concern with e85 is the availability of petrol stations around. Are you from melb and if so have you found it difficult for filling up for weekend drives?

Originally I opted for the -7, from what you have mentioned may relook at the -7's.

Looking at the specs on the intercooler on the GTR R33's is rated up to 450kw? Would you still change them?

ive still got the standard one in mine but we have seen proven gains right through the rev range from changing them

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • EDIT: Just a little info what my tranny is "doing" :   For the long time the trans do this "bad" sound:https://www.youtube.com/watch?v=qs_iTXgDt40 It is literally the same sound and same symptoms(when i push the clutch it quites down) So is it really the shaft bearing?   Also:  i found this on forums: The RB20 and SR20 boxes are nearly indentical inside (rb20 has longer mainshaft)and suffer badly from bearing and selector failures when driven hard   The bearing is true and selector failure kinda too...it is "harder" to get into gears specialy when i drive a little bit hard...
    • We will review wtf is going on, but if you made any donations let me know and i will follow it up with the admins
    • See, that button sounds like perfection Duncan! My eyes really don't like light shining at them from a dash when I'm driving. Being part red colourblind, I've found for most cars that I can change colours on, I set everything to red, so my eyes see the elast amount of colour! I miss normal gauges in cars
    • bro, knowing the Japanese in  the 90's, i wouldn't be surprised if they shared components across their model lineup.
    • Maaaan so many "little" things  i rly hope my old RB20 would be "ok" and not too bad. I try to learn what and what not do i need. I look at crossmember at it looks different...even parts numbers are different. Wiring and all that i rly do not know...yeah someone mentioned the speedo thing. On that yoke clip. I rly do not know what can and cant be done "custom" so that is why iam asking to know and not be suprised 🙂  I know what it looks like  
×
×
  • Create New...