Jump to content
SAU Community

Recommended Posts

Hi Guys,

We are cleaning out a shed full of RB Parts.

RB26 blocks $400.00 Each from standard bore to oversize. 3-5 to choose from

RB30 Blocks A8 Turbo $400.00 Each from standard bore to oversize. 3-4 to choose from

RB26 Cranks - Longnose $400 short nose $175

Arias RB26 Standard bore (86mm) Forged Pistons (set) good condition $300.00 ony need rings.

CP Pistons For a RB30 Block and RB26 Head (set). To Suit 86.5 oversize bore. with rings and pins $500.00

Spool RB30 Rods good condition (set) $500.00

Mahle for a RB30 Block and RB26 Head. To Suit 86.5 oversize bore. 5 out of 6 are band new 1 got damaged on the machine cutting clearances for the oversize valves. $400.00 - it will cost $200 for 1 new piston the set is worth $1200.00 new.

HKS Pistons for a RB26 87mm with rings and pins (set) $400.00

ARP RB25 Head Stud Set - $150

Greddy RB fuel rail $50.00

New Sets of Bearings

heaps of other stuff

twin turbo dump pipes HKS and Stock 34 GTR Dump Pipes

I can freight Australia wide. location Newcastle NSW

contact Adam - 0449 664 330

IMG_3299.jpg

IMG_3280.jpg

IMG_3282.jpg

IMG_3284.jpg

IMG_3285.jpg

IMG_3286.jpg

IMG_3301.jpg

IMG_3290.jpg

IMG_3294.jpg

IMG_3296.jpg

IMG_3297.jpg

  • 5 weeks later...
  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can you enlighten me on your best practice regarding these hoses? I don't wanna make the same mistake if you already got a better solution.
    • I have some silicon hoses already, for example engine to watercooler. But yeah, I get the sentiment. The lower intercooler silicon hose is drippy too, despite not being very old. Does anyone except Nismo make these same lines out of rubber? Long term I think they'd be the better replacement, especially since the car won't live as hard a life anymore as in the past nor be driven as often.
    • I know most issues are just age related. But for example the turbo oil drains, there is dash adapters for these and you can just make a braided teflon line for them and (probably) never have them leak again. Also not terribly expensive. Can you even get the factory hardlines from new? Or are they repairable if they break?
    • I know it'd be much much easier with the tool. I hope I can find one that won't take 3 weeks to get to me an isn't a "Asian models kit" that has tons of (to me) useless adapters for a load of cash.   It's a summer project/fun car. I do wanna enjoy it, without endless downtime over and over. So yeah I would even go and buy an engine crane + stand to save myself the trouble of hard to reach or unreachable places going bad later on. Would also be a good opportunity to put on a Fluidamper, renew the mains seals and stuff like that. I have some money on the side that I can use for that, what I wouldn't want to or be able to do is let everything be done by a shop or have my engine completely rebuild right now. I intend to do most of the "doable" jobs myself. Pulling an engine can't be that hard, can it?
    • Evening all. Got this odd issue with my R34 GTT. If I let the car idle for around 15 seconds or more (even when cold) and I jab the throttle a bit, a decently sized plume of blue/grey smoke comes out the exhaust. Doesn't smoke when idling alone, just when giving it some gas after idling. No smoke on cold start or from what I know, normal driving. Not 100% sure about smoke on decel but I don't think there's any. Any pointers on what I should start doing to troubleshoot it? Or if anyone has experienced the same I'd love to get some insight. Cheers.
×
×
  • Create New...