Jump to content
SAU Community

Engine Check, Spin And Vdc Off Light Comes On When Driving?

INSANITI
 Share

Recommended Posts

INSANITI Collaborator

INSANITI

Posted
Posted

Hi Guys,

got some major things happening on my 350GT. i was driving along this morning and suddenly 30mins into my drive the engine light, SPIN and VDC off light came on. After stopping the engine and tried firing it up again. YOu can hear the whole engine trying to start but not turning. I tried the same process again and pressed on the accelerator and the car fired up with the same set of lights coming on.

Anyhow i manage to reset this by doing the ECU reset on youtube and manage to drive (and park the car) but on the way to the another undercover carpark the whole car suddenly died slowly and tried starting again and manage to do this by pressing the accelerator. And the 3 lights came on again.

Can't be the battery as it is brand new (over a month old). Could it be the alternator or distributor?

What is worrying me the most is when the car suddenly lost all eletrics while moving in a carpark and this could happen while im driving on the motorway?

i reset the ecu and its out again.

Do you guys have any ideas?

regards,

JT

INSANITI Collaborator

INSANITI

Posted
  • Author
Posted

i dont know .... i dont have a reader.

i found something similar. i am guessing its the camshaft position sensor?

http://www.sau.com.au/forums/topic/310538-ignition-dying-on-2003-model-350gt-8/?hl=%2Bengine+%2Bdied+%2Bwhile+%2Bdriving#entry5117985

sonicii Veteran

sonicii

Posted
Posted

I am guessing that would be the 'SLIP' light? not SPIN :)

These are symptoms of many possible faults. It could be a crank or cam sensor, or something else, you will need to get the codes read to find out.

INSANITI Collaborator

INSANITI

Posted
  • Author
Posted

haha yes slip light lolz just goes to show i dont pay attention to my car only when it has issues. problem is i reset the ecu so i have to wait for it to happen again before i can take it to the shop.

Stuart McK Collaborator

Stuart McK

Posted
Posted (edited)

Hi. One of the two cam angle sensors has failed. To confirm, and to find out which one, this is how you get the code - but then you probably already know because you said you reset the ECU:

  • Turn ignition to ON (dont start engine).
  • Wait 3 seconds
  • Then over the next 5 seconds, push the accelerator all the way to the floor and then release it fully - do this 5 times quickly within these 5 seconds.
  • Then wait a further 7 seconds.
  • Now push the accelerator all the way to the floor again and hold it for 10 seconds until the MIL starts flashing.
  • When you see it start to flash after 10 seconds, release the accelerator straight away
  • The light should then keep blinking - giving you the fault codes. It will flash up 4 codes, pausing between each. It will blink slowly for the first group, then fast for the next 3 groups. 10 flashes in a group = '0'. ie. code 0123 would be 10 flashes, pause, 1 flash, pause, 2 flashes, pause, 3 flashes, long pause, repeat...
  • Turn the ignition to OFF when you're done - this will exit the diagnostic mode.

Error codes here: http://www.nicoclub.com/archives/350z-ecu-codes.html

0011 is the Bank 1 sensor, 0021 is the Bank 2 sensor.

I hope this helped.

Edited by Stuart McK
  • Like 1
INSANITI Collaborator

INSANITI

Posted
  • Author
Posted

but i have reset my ecu so at the moment the car is running ok. Is there a way to go into diagnostic mode again and try to find which one is the problem?

I didnt do the count hehehe so i dont know which one is the problem. so at the moment i am waiting for it to go into limp mode (hopefully not when im on the motorway)

Stuart McK Collaborator

Stuart McK

Posted
Posted

but i have reset my ecu so at the moment the car is running ok. Is there a way to go into diagnostic mode again and try to find which one is the problem?

Not that I'm aware of. I wouldn't have thought that an ECU reset would have resolved it if a sensor has completely faulted, btw. But if it does do into limp mode, keep your revs down and don't drive it hard home. Oh, and the genuine part from a Nissan dealer was $100-150 I seem to recall (I had to do one sorted ~5 years ago).

  • 2 weeks later...
  • 2 months later...
INSANITI Collaborator

INSANITI

Posted
  • Author
Posted

thanks guys.  I was on the market for a new car anyway. so found one and traded the skyline in. :-) just couldn't be bothered finding the fault in the end after 5yrs so it was time to change.

I still miss it though since I see a few of them around now.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      MLR's Bogan cruise ship

      By Kinkstaah · Posted

      Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • The Bogan
      MLR's Bogan cruise ship

      By The Bogan · Posted

      I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • The Bogan
      MLR's Bogan cruise ship

      By The Bogan · Posted

      If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • sonicii
      Mechanic in Victoria

      By sonicii · Posted

      I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
    • GTSBoy
      R32 GTR clutch master cylinder adapters

      By GTSBoy · Posted

      Some of them keep working fine. 9 out of 10 of them end up causing an absolute misery bleeding the system and get thrown on the workshop floor in a tantrum and never thought about again because they were never really needed and just added crap to the car that we could have done without. Same-same with HICAS, A-LSD, and various other stupidities that over eager 10x engineers thought we had to have.
×
×
  • Create New...