Jump to content
SAU Community

Kewl Skylines Number Plates


Recommended Posts

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

Most of these are taken but are good anyway.. QLD plates..

6 = G

5 = S

1 = I

60CHA = GOTYA

60BBY = GOBBY

15LOW = IS SLOW or IS LOW

51OPS = SLOPS

25EXY = TO SEXY

60QIQ = Go QUICK

12PLZ = ONE TO PLEASE

12PRV = ONE TO PERV

15EXY = IS SEXY

FLY81 = FLY BYE

HDJ08 = HEADJOB

61VUP = GIVE UP

80OKD = BOOKED

80GAN - BOGAN

For skyline's

32SUM = thirty Two Sum

33SUM = Thirty Three Sum

and of course 002 NVS :)

Originally posted by mango

Im sure everyone knows that a Skyline makes most people take a second look.  

So I;ve been debating over what custom number plate I should order for a few weeks so that my car will stand out that little bit more:). Firstly, I was just going to get my nickname ie MANGO... but then my friends thought that'd look a tad retarded.  

So then my mates came up with the idea of putting the model type of your skyline in the letters of your plate. For example R33 is the same is REE... so from there we tried to figure out wht words have REE in them...  

these are a few combos we came up with:

STREET CREED = STR33T CR33D

GREED = GR33D

plus there were a few more........but being the retard i am cant remember them:rolleyes:  

anyway.... i ended up gettin' GR33D. I;m really interested what you guys think? I reckon my mates are genius'... I;m too absent minded to come up with such an idea.

PS. Hey WASSABI... what does wassabi actually mean? Oh and i luv your car i see it cruising around subi and shention park all the time... you;re car is sweeeeeeeeeeet:D

Also, can anyone think of any other REE ie R33 combinations for plates?  

Cheers:lol:

WASSABI is the green shit u get with your sushi (ie... its hot and it comes from japan) but the real spelling was taken (WASABI) so i have ****ed those plates off as of yesterday, "GOTRICE" is on its way in a few weeks now ;)

Guest GR33DyMANGO

hhahahaa.. thats hella funny. GOTRICE is a wikid idea for a number plate. ive seen WASABI on a BMW or Merc(something like that) in subi recently.

i thought about getting NO WICE.... but then thought some ppl might think its takin' the piss a little too much and i could end up with a few dents/scratches on my car as a consequence.

hey WASSABI i saw u at the BP servo along stirling hwy a few weeks ago after u had just raced another skyline (so the attendant told me)... i was just wondering who won and by how much?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I know this one’s the BB one. My tuner did make mention about the actuator. I am curious about the VCT as well
    • Might also needs a stronger actuator with the right preloading. With older 2019 built bush G3 units, BB upgrade or 21U housing down size makes a pretty decent gain in response as well. 
    • Hey lads  so im finally putting together my rb30 forged bottom end and ran into an issue. I measured my main bearing clearance with arp main studs torqued to 60 ft-lbs using ACL H series STD size bearings and standard, un-ground crank shaft journals and got an oil clearance reading of about 1.3 thou measuring straight up and down and about 2.8 thou measuring at a 45 degree angle (just above and below the parting line). My machine shop said they measured the main tunnel and it was all within spec (they didnt say the actual measurement) and to go with a standard size bearing, which i have done and the clearance is too tight, I'm guessing because of the extra clamping force from the arp studs distorting the main tunnel. I was wanting to run about 2.5 thou main bearing clearance.  My questions are: 1. could i just use the HX extra 1 thou clearance ACL bearings? that would fix my straight up and down clearance making it about 2.3 thou, but then would the side to side clearance be too big at around 3.8 thou? 2. what actually is the recommended main bearing clearance for measuring near the parting line / side to side. i know its supposed to be bigger as the bearing has some eccentricity built into it but how much more clearance should there be compared to the straight up and down measurement? at the moment there is about 1.5thou difference, is that acceptable or should it be less? 3. If i took the engine block + girdle back to the machine shop and got them to line bore the main tunnel (like i told them to do the first time, but they said it didnt need it) what bearing size would i buy? the STD size bearing shells already slide in fairly easily with no real resistance, some even falling out if i tip the girdle up-side-down. If im taking material out of the main tunnel would i need a bearing with extra material on the back side to make up for it? this is probably confusing af to read so if something doesn't make sense let me know and ill try explaining in a different way. My machine shop doesn't come back from christmas break until mid January, hence why i'm asking these questions here. TIA for any help or info 
    • I bought the model back in Japan in Feb. I realised I could never build it, looked around for people who could build it, turns out there's some very skilled people out there that will make copies of 1:1 cars or near enough. I'm not really a photo guy... but people were dragging me in a group chat for the choice of bumper as someone else saw the car before it was finished as they are also a customer of that shop. I took the photo in the above post because I was pretty confident that the lip would work wonders for it. Here's some more in-progress and almost-done pics. It gives a good enough idea as to what the rear looks like!   I have also booked in a track day at the end of January. Lets all hope that is nothing but pure fun and games. If it's not pure fun and games, well, I've already got half an engine spare in the cupboard 
    • Well, do ya, punk? Seriously though, let's fu<king go! The colour and kit looks amazing on the car. Do you have any shots from the rear? I don't quite follow how the model came around. You bought the white kit and he modified it to match your car? Looks nuts either way!
×
×
  • Create New...