Jump to content
SAU Community

Recommended Posts

Hi guys i know this is probably pushing it but i have to ask

Is there such a thing as a quiet 3 inch exhaust for a R33 GTS~t.

If so does anybody have Db test something close .

other wise i may have to do a stealth system like pic....

Good quality round centre muffler and oval rear muffler can be within legal limits.

my 3" inch system is legal, quiet and not restrictive.

3.5" dump, 3" 100cel cat, 2x 3" straight-through mufflers, dump tip. All stainless, all magnaflow.

not a skyline, but turbo cars are generally same-same.

At 100km/h the engine/turbo noise and general tyre/road noise kills any quiet time you might get anyway!!! Well it does in mine. If I want to drive and listen to music the volume knob gets a work out!!!

  • Like 1

Once you get 2x mufflers & a resonator to remove the "bark" from the exhaust it's pretty quiet.... the tyre/road noise is the loudest thing in my car at cruise.

On the loud pedal there's "some" noise but you can still hold a full conversation without raising your voice.

if yr interested, my super super quiet 3" exhaust from my 33 GTR will be coming off soon (i'm actually annoyed that it is too quiet and going to a 3.5" varex).

i think they are interchangable with gtst's..... if so you could buy that one from me :)

Edited by usmair

Yep

I run a 3.5" system and I can tell you it's quieter than 90% of the skylines out there....

3.5" dump -> 3.5" cat -> 3.5" mid muffler -> 3.5" resonator -> 3.5" muffler

What brand of mufflers you using?, got any part numbers?

Id like to build a 3.5 inch exhaust, but my mates ones are super drony even with 2 big mufflers and a lot of 3.5 inch mufflers are only 3 inch internally so im sorta put off atm

was just going to go 3.5 inch to just before diff and go back to 3 inch and use muffflers i have used before that dont drone like crazy

cheers

darren

Edited by jet_r31

What brand of mufflers you using?, got any part numbers?

Id like to build a 3.5 inch exhaust, but my mates ones are super drony even with 2 big mufflers and a lot of 3.5 inch mufflers are only 3 inch internally so im sorta put off atm

was just going to go 3.5 inch to just before diff and go back to 3 inch and use muffflers i have used before that dont drone like crazy

cheers

darren

the mid muffler is a basic hurricane round 3.5" muffler, the resonator has been cut off same cat back (HKS Priest) and the sides trimmed till the pipe work became 3.5" the rear muffler is a massive HKS Priest muffler which isn't really 3.5" more like 3.25" but good enough.

Funny enough, when the gate cracks the exhaust gets even quieter.. (it's plumbed back after the cat) like so (old pic, all the shit is wrapped up and also the wiring has been cleaned up):

post-22311-0-54027400-1463922888.jpg

  • Like 1

My soarer is loud as f**k with its 3.5" system

Has a big hooker aerochamber at the back and a custom mid muffler (its small cause f**k all room with a 3.5" pipe)

What mufflers are you guys using on the quieter systems?

My soarer is loud as f**k with its 3.5" system

Has a big hooker aerochamber at the back and a custom mid muffler (its small cause f**k all room with a 3.5" pipe)

What mufflers are you guys using on the quieter systems?

i thought the hooker was one of those mufflers that is actually 3 inch internally aswell, only has 3.5 outers

cheers

darren

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bump on this to not make another post, had a ‘head drain’ leak on me and have the engine out as we speak. Planning on just putting a new freeze plug back in , plug the tapped holes and just be done with that headache.    Now I still want to relieve pressure to allow oil to pass down the blocks returns easier. I’ve seen catch cans with multiple vents help folks with this issue on this forum.  I’m wanting to make my own. I have some pictures here of my setup if anyone can help how I should plumb and design the catch can I would deeply appreciate it !   rb25 Oil upgrades: 1.0mm restrictor n1 pump/billet gears extended crank collar  extended sump with trap doors/w welded fitting    
    • The Frenchy's kit is the way to go forward. A modern compressor that weighs about 1/2 as much, is at least twice as efficient, and will do a good job on R134a. And of course the kit has everything else you need to connect it up and have it work properly.
    • Hey all , I am in the process of having the AC system in my r32 GTST converted from r12 to r134a and I’m being told my compressor has gone bad and I will need a new one. I was wondering if anybody has any suggestions for what is the best route to go aside from dropping $1500 on a new oem one? I did see that Frenchy’s performance garage offers a kit to mount a Toyota compressor, has anybody actually used this kit on their car? Or is there anywhere I could purchase just a clutch? Any help is appreciated.
    • Well, your RB20 ECU loom won't have wires for the boost solenoid, that boost sensor, and possibly one or two other things. There could be differences in seemingly random things like the charcoal canister purge solenoid, because the 25DET has to handle boost in the vacuum system and the 20DE does not. I don't know - I haven't looked. It is very likely that all the most important things are same-same, being the main sensors like AFM, CAS, etc, and the injectors and ignition. Not that you'll need the AFM for the Haltech anyway. I would suggest that you would seriously want to sit down with the pinouts for both ECUs and just go through them and highlight green what is the same, orange what is different/missing, and make a plan from there. It's not going to be difficult. It will either be the same or need to be fixed.
    • yeaaa that's why I haven't done any wiring to the stock ecu harness because I have the haltech, but then that leads me to the other question of "is the pnp harness really plug and play?" or would I have to still switch some pins/wires over because the pnp is for the rb25det neo harness, and not for the rb20de neo harness. was really hoping to find something to spoon feed me since so many people have done rb20neo + t conversions, but man this is rough.
×
×
  • Create New...