Jump to content
SAU Community

Recommended Posts

Evening all,

Was driving home on the F3 (M1, whatever!) tonight and the just noticed the car 'shuddering' at around 2500rpm. Not a heaps violent shudder or anything like that, but definitely noticeable. I managed to creep my way up to 110kmph, no worries, but anytime I gave it a bit more gas and it would drop to fourth revs go up etc I would get the shudder again. I nursed it back onto Pennant Hills Road, and did a bit of testing and confirmed, definitely shudders at around 2500rpm, irrespective of higher speeds etc.

I know this is about when the turbo starts boosting, but driving the car under 2500rpm seems fine. Can hear the turbo whining per usual. No errors on the dashboard or anything, idles fine, engine doesn't stall. Thinking possible leak somewhere/vacuum lines.

Wondering if anyone else has experienced something similar to this before? Trying to narrow it down.. bit dark out there to go check lol

Car is a 2001 AR-X, stock except zorst., 123,xxx kms.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/465267-m35-help-shudder-2500rpm/
Share on other sites

I have a c34 stagea..i have a similar problem when at high revs..it has a shutter loses bit of power..and has a small like shutter when it idles...i think mine is fuel pump..because if i keep tank full or above half doesnt do it once...if i gets down near like quarter tank..it starts happening again...

Evening all,

Was driving home on the F3 (M1, whatever!) tonight and the just noticed the car 'shuddering' at around 2500rpm. Not a heaps violent shudder or anything like that, but definitely noticeable. I managed to creep my way up to 110kmph, no worries, but anytime I gave it a bit more gas and it would drop to fourth revs go up etc I would get the shudder again. I nursed it back onto Pennant Hills Road, and did a bit of testing and confirmed, definitely shudders at around 2500rpm, irrespective of higher speeds etc.

I know this is about when the turbo starts boosting, but driving the car under 2500rpm seems fine. Can hear the turbo whining per usual. No errors on the dashboard or anything, idles fine, engine doesn't stall. Thinking possible leak somewhere/vacuum lines.

Wondering if anyone else has experienced something similar to this before? Trying to narrow it down.. bit dark out there to go check lol

Car is a 2001 AR-X, stock except zorst., 123,xxx kms.

Cheers

Hi mate, it sounds like your AFM has failed.

Do you have a light on the dash?

G'day Dale.

Thanks for your response. I've read about the troubles with afm's, but symptoms sounded a bit different to mine? ie no errors in the dash and car isn't stalling..? Still, afm is a good thing to have spares of, where are ppl getting theirs these days? Wrx sti compatible or is the verdict out on the cheap Chinese versions?

Btw, I took the car for a short drive yesterday. Seems the shudder/hesitation kicks in around 3000rpm now.. So much more drivable lol :P

They don't always fail with the characteristic mil light and no idle, I've had one that would only fail when the intake temp went over 37 degrees, and it would only make the car stall at idle. Everything else was fine.

The current issue doesn't seem like the typical AFM symptoms; but checking all coil plugs and AFM plug is seated properly would be a good start, and making sure all the small vac hoses are connected in the plenum and valley area.

Maybe check all cooler piping for loose clamps and possible split joiners.

They don't always fail with the characteristic mil light and no idle, I've had one that would only fail when the intake temp went over 37 degrees, and it would only make the car stall at idle. Everything else was fine.

The current issue doesn't seem like the typical AFM symptoms; but checking all coil plugs and AFM plug is seated properly would be a good start, and making sure all the small vac hoses are connected in the plenum and valley area.

Maybe check all cooler piping for loose clamps and possible split joiners.

Cheers Dale. Hopefully I will get some time to check it out over the weekend.

Is it blowing smoke at all? Mine had similar symptoms to what you're describing plus the smoke blowing.

mmmmm Not really.. just a normal amount of white vapour-like smoke which disperses quickly, not something I would worry about. What was the issue with yours in the end, Duncan?

mmmmm Not really.. just a normal amount of white vapour-like smoke which disperses quickly, not something I would worry about. What was the issue with yours in the end, Duncan?

Split in the silicone hose on the cold side of the FMIC, took ages to find.I think I replaced every other silicone hose before I got to that one, as well as coil packs, spark plugs, hose clamps etc. Heres what it was running like:

  • Like 1

Split in the silicone hose on the cold side of the FMIC, took ages to find.I think I replaced every other silicone hose before I got to that one, as well as coil packs, spark plugs, hose clamps etc. Heres what it was running like:

So is it fixed or it's still missing? Sounds awesome, like anti-lag :)

Split in the silicone hose on the cold side of the FMIC, took ages to find.I think I replaced every other silicone hose before I got to that one, as well as coil packs, spark plugs, hose clamps etc. Heres what it was running like:

https://www.youtube.com/watch?v=0QotAsFh7mc

A pressure test would have found the leak instantly.

A pressure test would have found the leak instantly.

Yes, if I'd had a kit or anyone I know had a kit I'd have used it.

So is it fixed or it's still missing? Sounds awesome, like anti-lag :)

Fixed ages ago, it was a pig to drive getting on to boost as it basically leaking air and over fuelling (as you can tell) at about 3-3.5k

  • Like 1
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all   what short shifter do you use on your skykine r34?   my synchronous does have a problem and i was getting huge delay and grinding sound between 2nd and 3rd, did put shockproof red heavy stuff and it is great now/ no issues   would in your view short shifter screw this up?   people seems to suggest/ use cube short shifter and there is standard and premium. Seen review of premium as much better and less play. Thoughts?
    • Yeah, there's a bit of a density and friability difference between pebbles and any of those other things. Silicone will definitely float in oil and so will be mobile enough to move around. Although, again, if it is upstream of the filter it really shouldn't go any further. I would only ever worry about silicone when it is in places downstream of the filter. Upstream of the pickup is a whole 'nother matter. We've all seen what that does. I have seen the most abominable crap settled out in industrial gearboxes, trunnion lube systems and the like, without any sign that any of it has touched anything in the machine. Just chilling in the bottom, waiting for the inevitable operator error that causes the whole machine to need to be dismantled for repairs.
    • I have seen enough fire and brimstone from TSBs about roloc disks causing spun bearings that foreign object contamination is top of mind for me. For sufficiently large particles you might be right but usually it’s a distribution of debris and some of the larger particles can also break down and shed bits. If local shops report RTV contamination in a turbo is enough to wreck them I’m taking zero chances if I can help it.
    • Ask and ye shall receive! (eventually... ☺️) https://www.goo-net.com/usedcar_shop/0170208/detail.html
    • Weird ! Same Same with mine. Autoexcel in Bonnyrig is your friend ! 
×
×
  • Create New...