Jump to content
SAU Community

Recommended Posts

Hi Guys/Girls

I have a 95 GTR VSpec.

It is completely stock - wheels, airbox, turbos, exhaust - everything.

Mechanic reckons he's never seen one not touched or in this condition. Has a verified 109K kms. Was imported to Australia with 40k kms in 2000 - so has been here for ages.

I'm torn between leaving it alone, and giving it a bit of a touch up with wheels, coil overs, turbos, dumps, downs, exhaust, ecu, fuel pump, coils, studs, intake, fmic & other associated bits and pieces for 350-400kw at the wheels..

R33's seem to be the ugly ducklings of the GTR world - and they are very slowly increasing in value - but probably not enough to be a true investment like a clean 32 or 34.

It's nice to drive as is - but everyone wants more power.

What would you do?

post-143029-14665950825494_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/465466-what-to-do-r33-gtr/
Share on other sites

Garrett -7 or -9 Turbos

Full 3" or 3.5" Exhaust

Nistune or A'PEXi Power FC ECU or whatever your choice / mechanic can tune with

Cam Gears

Coilovers, Wheels and Tyres

Don't bother with Air Intake / Fuel Pump / FMIC / Dumps, stock is good for 300rwkW

Very few vehicles [cars, bikes, trucks etc] outlast a generation. So what was valuable in your time may be just another vehicle in 10-20 years. You see this all the time, everyone thinks they have an absolute desirable collectors item and they do while their generation is alive but as they get older and/or die out the next generation coming through aren't even remotely interested - well maybe a few, but not the majority.

So mod away!!!!

Any preference to single of twin? Will you be keeping the stock engine? What fuel?

I'd prefer not to have any RWC issues - but I live in the country - probably more of an issue once it comes time to move it on.

I'd like to keep the stock engine - if only from a cost perspective - and only 98ron is available here..

Edited by l0ckym

Garrett -7 or -9 Turbos

Full 3" or 3.5" Exhaust

Nistune or A'PEXi Power FC ECU or whatever your choice / mechanic can tune with

Cam Gears

Coilovers, Wheels and Tyres

Don't bother with Air Intake / Fuel Pump / FMIC / Dumps, stock is good for 300rwkW

Get a 3.5" exhaust but don't get dumps?

What's the point of a bigger exhaust if you've still got a restriction up front...

I'd prefer not to have any RWC issues - but I live in the country - probably more of an issue once it comes time to move it on.

I'd like to keep the stock engine - if only from a cost perspective - and only 98ron is available here..

If that's the case.

-5's

Bosch/ID 1000's

Walbro 400/460 in tank pump

Decent set of front pipes (none of this merging into 75 or 80 mm garbage)

3.5 inch exhaust (if not 4...) Get some mufflers made and have something fabbed up

Nismo coppermix twin plate

Whatever ECU you want

Keep factory airbox

Get some decent dumps (HPI 76 mm)

Quaife front diff if budget allows

Get a 3.5" exhaust but don't get dumps?

What's the point of a bigger exhaust if you've still got a restriction up front...

Cause stock Dumps can handle the power of 300+ rwkW

I wouldn't push anything over 300 rwkW on a 20+ year old Stock RB26 ('95 model R33 GTR)

Unless rebuilt and you want 350 - 400 rwkW then yes, go upgraded Dumps

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’d love to find some where that can recover the dashes to look brand new and original. Mine has a very slight bubble, nothing compared to come I’ve seen though 
    • $170K. I asked one of the guys there as a joke if that price was just for the passenger seat as it was where the price sheet was... he tried really hard to crack a smile 😄 He also mentioned that every single part of the car was inspected and either restored or replaced with a new or as new part, or made from scratch. The interior was incredible, every inch like a new car.
    • Time for a modernisation, throw out the AFM, stock O2s, ECU into the e-waste bin. Rip out the cable throttle, IACV, pedal, etc. into the scrap metal bin. DBW, e-throttle, modern ECU, CANbus wideband, and the thing will drive better than when it left the factory.
    • I agree, don't go trusting those trims. As I said, first step is to put the logger away, and do the basics in diagnosis.   I spend plenty of time with data loggers. I also spend plenty of time teaching "technicians" why they need to stop using their data loggers, and learn real diagnostics.   The amount of data logs I play with would probably blow most people away. I don't just use it to diagnose. I log raw CAN data too, as a nice chunk of my job is reverse engineering what automotive manufacturers are doing.
    • I'm aware, but unless you're actually seeing the voltage the ECU is seeing and you're able to verify the sensors are actually working I find it hard to just trust STFT/LTFT. I will say, logging the ECU comes naturally to me because it's one of the lowest effort methods of diagnosis and I do similar things in my day job all the time. Staring at 20+ charts looking for something that isn't quite right isn't for everyone. NDS1 allows you to log almost everything so that's normally what I do and then sort out the data later. 
×
×
  • Create New...