Rb20 Flywheel Resurface

[Timtim123]

Hoping for a quick response here. Dropping off my flywheel tomorrow to get it resurfaced and was wondering if anyone can confirm that there is a 0.008 inch step on the flywheel. I'm in the US, so I'm expecting that they won't have the specs in the system, so I'll have to tell them. I've done a good bit of searching and found conflicting answers. Below are two threads, one saying they are to be machined flat, the other saying they are stepped 0.008 inch (I found a few more threads about other Nissan motors having the 0.008 inch step too). Any advice would be much appreciated. Thanks

http://www.sau.com.au/forums/topic/424149-r32-gtst-flywheel-help-regarding-machining/

http://forums.nicoclub.com/flywheel-resurface-question-t61198.html

[iruvyouskyrine]

Flat.

Have never had a problem on the 20+ I have done. Never ever heard of having the flywheel stepped either.

[jmknights93]

Flat.

[Timtim123]

Cool, thanks for the responses. The machine shop surprisingly had rb info in their system and also stated it should be flat

[jmknights93]

^ I didn't mean to sound rude sorry

[StevenCJR31]

^ correct. .get it machined flat or buy a brand new/lightweight flywheel like i did (available in the states)