Jump to content
SAU Community

Building a reliable R33 Skyline

Blakeo
 Share

Recommended Posts

Blakeo Rising Star

Blakeo

Posted
Posted

Hi guys. I want to build my skyline into a reliable track/street car. It is not my daily, but I still want it to be as reliable as possible.

At the moment it has a 3" turbo back exhaust, spitfire coil packs, hks coilovers, return flow fmic and a ebc running 10psi and upgraded radiator with a gktech fan.

I run Penrite Racing 10w-40 10 tenths engine oil and change every 5,000km.

I have heard some issues with the rb25 is the oil pump, needs a crank collar. Can this be done without removing the crankshaft from the engine, pretty sure you have to machine it though.

Oil restrictors I have heard from research on here are essential too as well as a head drain kit and rb26 rocker covers.

What else should I look at doing to make it a reliable package. Also is this stuff required if my plan is to go to 250rwkw running a Link G4+ with a Kinguawa low mount turbo?

Thanks guys, please leave details and no sarcasm.

Link to comment
https://www.sau.com.au/forums/topic/465659-building-a-reliable-r33-skyline/
Share on other sites
admS15 Grand Master

admS15

Posted
Posted

None of that is required. Fit your ecu, bigger injectors and turbo, retune and enjoy. 250rwkw is a walk in the park for an rb25. You'll need a better fuel pump if you don't already have one. Walbro 255 for that sort of power will be fine.




Blakeo Rising Star

Blakeo

Posted
  • Author
Posted
None of that is required. Fit your ecu, bigger injectors and turbo, retune and enjoy. 250rwkw is a walk in the park for an rb25. You'll need a better fuel pump if you don't already have one. Walbro 255 for that sort of power will be fine.

A mate of mine blew his engine from a failed oil pump at the track because he was on the limiter for a couple seconds. His was a neo seems like its a common issue, of course can keep it off the limiter but it happens sometimes

Blakeo Rising Star

Blakeo

Posted
  • Author
Posted
None of that is required. Fit your ecu, bigger injectors and turbo, retune and enjoy. 250rwkw is a walk in the park for an rb25. You'll need a better fuel pump if you don't already have one. Walbro 255 for that sort of power will be fine.

A mate of mine blew his engine from a failed oil pump at the track because he was on the limiter for a couple seconds. His was a neo seems like its a common issue, of course can keep it off the limiter but it happens sometimes.

admS15 Grand Master

admS15

Posted
Posted
A mate of mine blew his engine from a failed oil pump at the track because he was on the limiter for a couple seconds. His was a neo seems like its a common issue, of course can keep it off the limiter but it happens sometimes.

I'll change that to none of that is required if you stay off the limiter.

admS15 Grand Master

admS15

Posted
Posted

Raise rpm limit to 10k. Lol. Honestly man there's heaps of unopened rb25's out there pushing above 300rwkw doing hard track work and surviving for years. If you want to pull an engine apart to fit a crank collar and oil pump, go right ahead, you may as well put some forged pistons and rods in it and then you can go out and test how much limiter it will take before it goes bang. Then you can tell us how many seconds it took so everyone knows the limit :)

HarrisRacing Proficient

HarrisRacing

Posted
Posted

Not sure if the RB25 shares parts with the 26, but my car showed up with 5 destroyed main bearings from what was no doubt oil starvation. BUT the thing I want to add here is that mine also had 2 cracked valve guides. They are brittle and crack. I would change them for bronze and get the head overhauled in a heartbeat if you are pulling the head off.

If speaking of reliability.

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

No need to open the engine for 250kw. Use a quality synthetic oil and a quality tuner.

If you want to bash the limiter go right ahead and wait till it blows. Then pull engine and spend the $10K - $20K to make it stronger.

  • Like 1
Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted

Bragging rights. 

370kW here, has about 27psi into it and used for track. Usually run about 23 to 25psi on the track. Motor has 350000km+ still going strong. Just pushes a bit of coolant after 10 hard laps at 27psi. Seems ok about 23 to 25psi, all it has are ARP non 2000 studs.

250kW is a walk in the park.

  • Like 1
jmknights93 Mentor

jmknights93

Posted
Posted
14 hours ago, Blakeo said:

A mate of mine blew his engine from a failed oil pump at the track because he was on the limiter for a couple seconds. His was a neo seems like its a common issue, of course can keep it off the limiter but it happens sometimes.

Well that kinda sucks. Tracking being a drift event or circuit?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • jtha7
      Replacing turbo water line - any recommendations or advice?

      By jtha7 · Posted

      Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • MBS206
      RB20DE NEO smallbox clutch.

      By MBS206 · Posted

      From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • MBS206
      Lock up the old for sale / wtb threads.

      By MBS206 · Posted

      That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      I hope that is not something that bad. From what i remember he said that only first gear is "hard" to get in and that he has couple of ideas what to try next but idk 😕  hope it is not gearbox out. I will let you know.
    • GTSBoy
      RB20DE NEO smallbox clutch.

      By GTSBoy · Posted

      If it's not the hydraulics, it is probably gearbox back out. Usually as per @Duncan's post, or otherwise associated with not getting the throwout fork positioned correctly. All the way up to catastrophically bolting shit back together without it being aligned properly and wrecking the clutch/input shaft/flywheel/something else.
×
×
  • Create New...