Jump to content
SAU Community

RB32

s2d4
 Share

Recommended Posts

s2d4 Rising Star

s2d4

Posted
Posted

Hi guys,

Thought I would keep a log of the current build with Josh at Galvsport. 
Some of you may have seen it recently. 
f1WyhdPyMfBGed7V4vEV1jp5hRtS9RcqQ9fpqd_6

Basic Build Spec:
RIPS RB32 with the entire kitchen sink. 
Brad Stacey Cage
Full Restoration with brand new exterior Rubbers/Trims
Genuine Veilside EIII
Billet Merge Collector
GW3884R (AKA6465) street Setup. 
CPC Billet Plenum. 
102mm DBW Throttle body. 
Full Set of Nismo Links
MCA Reds Nitto II spec. 
Quaife Diffs
The DriveShaft Shop Axels and DriveShaft.

Link to comment
https://www.sau.com.au/forums/topic/465922-rb32/
Share on other sites
s2d4 Rising Star

s2d4

Posted
  • Author
Posted
6 hours ago, JH32 said:

NIce specs, what's some of the history behind the build?

This is actually my second GTR after bending the chassis on the first one back in 2011.  It was literally in the last stages of being built to how I wanted at the time (only a brakes  upgrade remaining because they'd sent me the wrong parts). It then sat in storage waiting to be re-shelled, kind of pissed me off every time I thought of it so nothing happened for a couple of years. 

Then I bought a shell in 2013 but as I was doing long stints of FIFO at the time, not much happened so I sold the shell in 2015 and was going to part out the first car. 

Not long after that, my dad had to have a emergency quadruple bypass recently which put things into perspective. I didn't like how I'd never finished building a GTR so I went and bought another GTR that needs some work and here we are. The first car will serve as a donor car  to the current project although the spec has changed quite a bit since then. 

Hopefully everything goes well with this build and I can enjoy it until I am physically no longer able to do so. 

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/465922-rb32/#findComment-7760036
Share on other sites
  • 5 weeks later...
  • 2 weeks later...
  • 9 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • sonicii
      Could it really happen......

      By sonicii · Posted

      I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • MBS206
      Could it really happen......

      By MBS206 · Posted

      Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • MBS206
      R34 25GT Engine Light 21

      By MBS206 · Posted

      Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...