Jump to content
SAU Community

GTR Parts rb26


Recommended Posts

 

Rb26dett complete hotside, includes: intake cross pipe

Turbos x2, manifolds, heat covers, dump

Pipes, braided water and oil feed lines and fittings. $550

Rb26 coil packs inc ignition loom. $150

Rb26 engine loom and ecu $180

Gtr 440cc injectors and fuel rail $100

Bilstein adjustable suspension $400

Rb26 cas $80

Rb26 plenum and runners $120 ( no throttle bodies)

Rb20 afm $60

Rb20 cam covers $10

Gearbox cover plates $10

Rb cam gear backing plates $10ea

57a96b14d4200_ImageUploadedBySAUCommunit57a96b386a9b8_ImageUploadedBySAUCommunit57a96b54494e3_ImageUploadedBySAUCommunit57a96acd4bdd9_ImageUploadedBySAUCommunit57a96adde1884_ImageUploadedBySAUCommunit57a96afce32a9_ImageUploadedBySAUCommunit

 

ImageUploadedBySAU Community1470720716.269724.jpg

ImageUploadedBySAU Community1470720732.844397.jpg

ImageUploadedBySAU Community1470720763.879112.jpg

ImageUploadedBySAU Community1470720787.770401.jpg

ImageUploadedBySAU Community1470720823.338410.jpg

ImageUploadedBySAU Community1470720851.369221.jpg

Link to comment
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Yeah I noticed this just now. No doubt she will be running smoother next start😂🤣😂
    • ENR34 manual transmission transfer cases are 33100-23U00 which is shared with all of the R32/R33 GT-Rs and GTS-4s. And the C34 Stagea. Do not bother with automatics, that is a huge effort to swap and the car will be worse for it. And an automatic transfer case does not have the right housing for the shifter which comes out the back of the transmission and goes through the transfer case. I already posted my response on reddit but if you didn't see it there here it is: You have almost certainly damaged the transfer case, the only question is how badly. Nobody can tell you how bad without more information. If you have a giant hole in the transfer case pissing out all the transfer case fluid then you need a new one. If it's not that bad then the only question is whether you burned up the clutches. Drain the transfer case oil and inspect for metal on the drain plug magnet. Small black filings are normal. Big chunks of metal or a ton of black fuzzies not so much. Fluid should be nice and red. Any other color isn't great. If the color is reasonably red and there's not a bunch of clutch material discoloring it or anything like that you probably got away with insubstantial excess wear not worth trying to fix. If you have to rebuild or replace the transfer case keep in mind you have to pull the transmission to get it off.
    • As promised………… the first start. Rough and a few bugs to work out. Still she lives att.1cnTUvrWxiOZUFbg0S43m1VFUdDhxGBq3UU53bvtkww.mp4
    • Can I suggest a 15W50 oil is too heavy. Its a brand new engine - you should be able to run something like a 10W30. Shove some steel wool into your catch can  - more technically "oil/air separator" - so that the oil vapour has something to condense on.
    • Nice write up solder thank you.  that problem had fallen into another days fun. I wanted to get this cold side in and turned over so it was wired up the same to get a start. no luck I got a couple of cough’s before the battery died unfortunately. we have some wether on the way and I’m back to work, I will order your plugs and re wire them in the near future. 🤙
×
×
  • Create New...