Jump to content
SAU Community

Recommended Posts

E85 is not out of the question.  I would suggest that you can take the tinfoil hat off.  There are many people on these forums and others reporting that E85 sits just fine in a fuel tank without absorbing the Pacific Ocean.

And if you left the tinfoil hat on there are ways and means that you could get around any such problem.  Such as, put it away with a nearly empty tank, and put fresh fuel into it from a jerry can just before you use it.  Or any variation on the theme.

Let's face it....old petrol is worse than new petrol.  If you leave old petrol in a tank for 6 weeks it will change over that time.  If you ever find yourself leaving a car for a long period of time then the best thing is to leave it with as little fuel in it as possible and put new fuel in it immediately - well at least before giving it any curry.

I must be missing something here, 

20 minutes ago, lcxu105 said:

It only gets use maybe once a month and can sit upto six weeks at  time and not move.

So e85 is out of the question.

I must be missing something here, there is a general statement then E85 gets ruled out.... how are these two things related?  Pretty much everyone I know who run E85 use them about that much and leave them for that kind of time period regularly as we don't get E85 at the pump, so it's usually a race car thing and the cars tend to sit with it.  The only issue so far with my mates ones have been one which had non-E85 compatible foam in the fuel tank which got dissolved and caused issues in the fuel system... lots of crap through everything, but easily avoided by making sure everything is E85 compatible.

Most race type fuels have down sides and things to be aware of, if you're going to be paranoid then use 98.  

My car sat with half a tank of E85 whilst I had the motor and box out over four months. Starts and runs fine every time and the same fuel will still be in it when it leaves the garage in October, obviously I'll fill her up with fresh E but Iv never had a problem.

Another point- That fuel has been sitting in my tank since last December.

Plenty of people let it sit and never have issues.

Have used lots of old E85 that people have given away for sitting over 2-3 months. Oldest fuel I have used is easily over 1yr old and car ran fine, AFR was fine. This was giving the car a very hard time at Queensland raceway as well in 40deg heat

Doesn't matter.  Exactly what is going to happen anyway?  I won't type it all out again, but perhaps search for a couple of posts on here where I tiraded over the stupidity of thinking that gallons of water can get into your fuel tank through whatever air movement there is.

yes E85 is hygroscopic, ie will absorb moisture from the air, but at the same time, 98RON fuel has additives which are quite volatile and will "gas off" over time which will reduce the octane rating of 98 if left to sit.

A bit of absorbed water in E85 is less likely to affect it's octane rating, as it's the ethanol content that provides the high octane.

Normal 98 fuel left sitting could be closer to 95 octane by the time it's sucked into the engine - IMO a bigger risk on an engine highly tuned for fresh 98.

IMO the "sitting" time is not a good criteria for deciding E85 vs 98.

It's more about your horsepower requirements, availability of E85, ability to fill up on a long drive, carrying jerry cans of fuel etc

cheers

Mike

  • Like 1
31 minutes ago, lcxu105 said:

Ok than. I've heard that e85 turns into a jelly. Has anyone ever had this happen to them 

 

Whoever told you that please go headbutt them. I have been running e85 for the past 4 years and left 40L in the tank while the car was off the road for 10 months and nothing bad has happened.

1 hour ago, lcxu105 said:

Ok than. I've heard that e85 turns into a jelly. Has anyone ever had this happen to them 

 

Maybe if your E85 absorbs enough moisture over time and you add a few packets of jelly to the fuel tank it will, but honestly it aint going to do shit.

Opened up my filters two weeks ago after sitting around from November with E85 in the tank. These fuel filters were cleaned in July/August last year. This is what came out. Was pretty yuck.

Whole fuel system went in the bin!

AD372875-F66A-4E59-B5B3-A148391C7DB2_zps

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'd want an even MORE side on view. More or less you want to make sure the outlet is actually square with the outermost part of the bumper. Or you end up getting soot all over your bumper from your hektik exhaust. In any case, it looks pretty close. I think the way to fix this is probably more of an overhaul at an exhaust specialty shop if you want tips that are rounded off or sit nicely with the bumper but have proper clearance and don't move - Probably more of a redesign than a quick fix. I've pencilled in my own exhaust with its own various problems, pinholes, PITA fitment, and other issues and can see myself going to a shop and saying "JUST DO THIS BUT BETTER?"  Which is gonna work better than any more small fixes. I'm gonna chime in here officially with "from an outsider perspective this exhaust looks fine so this is self OCD probably" (which I also suffer from)
    • Reminds me I really need to install that HKS oil cooler I bought years ago.
    • It be 40°C outside lately. 10W60 is a good idea here. Well, certainly 10W50.
    • Here are some side on's.
    • I just did an oil change on my daily which used oil that is probably 2-3 years old. Normally I try to follow exact viscosities, but my LS400 is fairly tolerant. Dumped something like half a quart of 0W30 Mobil1 ESP X2 in there, followed by 2 quarts Pennzoil 5W30, followed by ~1.2 quarts of liquimoly 5W30 LL04 spec oil. Then the rest was QS euro 5W40 which is actually so thin it's basically a 30 weight oil. All this is to say it doesn't matter that much. We aren't talking about brake fluid. For an RB I would recommend a high ZDDP oil because it doesn't use rollers in the interface between the cam and valve, but a 5W30 or 5W40 is fine to use for street use. The 10W60 guidance really only applies if you're getting it hot and pushing the engine hard.
×
×
  • Create New...