Jump to content
SAU Community

Recommended Posts

Hi guys,

I have some gear for sale. 
- All items are located in Georges Hall, Sydney (2199).
- Postage is paid by the buyer.
- NO paypal!!!
- Upon delivery, please inspect items and if they are not as I have described then please let me know. You have 7 days from date of delivery/pickup. This is a condition of sale. I am not interested in you coming back to me after 6 months!
- If you require further photo's I will gladly take more and send them to you.

1:
Item: Apexi power intake
Condition: Fine. used for approx 5000 kms. Wont be needing it due to going single turbo. There is a little bit of surface rust on the brackets but a quick sand and a paint will sort that out.
Price: $200

A29DB344-0B69-4354-9F5E-11A325D14EAA_zps
B56203EF-72D3-4298-BCEE-9D8E6C5FD383_zps
EC921DC3-9BCF-4557-A131-DA8ABC23506A_zps

2: 
Item: Under boot surge tank. It was on my R33 GTR and holds 2 x 044's. I will throw in the pumps (2 of) however I don't know what sort of condition they are in. The Feed/Overflow and return bungs are -8.
Condition: It could do with a clean and a repaint. 
Price: $200
B38E848B-DDBC-45EC-BEEE-8E30CF4D6F65_zps
8BA16E78-1A27-49BF-9126-8A5F2E883B91_zps
E28E64E0-A93E-4D1D-AA8D-96398A88F6D5_zps

3: 
Item: HKS Twin Turbo hard piping kit. This goes from the back of both AFM's and deletes the stock rubber piping. 
Condition: Fine. A quick polish and it will look good as new.
Price: $300
28DFC3A3-693E-409F-A58C-726849E7B14B_zps

4
Item: Hypertune airbox and Titanium lobster back intake pipe with K&N pod filter (RF 1015). This was made with a combination of a 6 boost exhaust manifold, Borg Warner EFR 8374 (9180 will fit also) and an R33 GTR.
Condition: Perfect. It was made and i've decided to change it. Engine has not run with this setup on it.
Price: $1,000
28C48F21-6CAB-4838-AE10-02452D0B6664_zps
This photo is of a mates car. Box is identical but he just had allow piping done. I have shown this photo as it gives a better indication of how it all sits.
4A2AA073-54A8-4AFB-BFC2-9E2F50350777_zps

5
Item: Nismo gearbox mount.
Condition: Fine. Used for approx 10,000 kms.

Price:$50
Price:FF22ED1E-35FF-4E5F-9798-D864FC0175CC_zps
92BD9A5F-A757-4A01-B289-C97EB5E47738_zps

6
Item: Haltech EGT sensors and bungs.
Condition: Brand new. One packet was opened for photo purposes only.
Price: $600
FE6A7E0D-85D3-4D80-855B-7DE9DBF6794E_zps
FC1C1675-C431-4CE1-AC12-BEBBF63D8300_zps
1EC7A066-BA6E-4F0D-B98A-EA797144B689_zps


Item: Holley Dominator 12-1800 fuel pump
Condition: Fine. It came off GTR NUR's R34 GTR. It was used for one dyno session and was in the car for approx 2 weeks. I would have used it but I changed how I wanted to layout the fuel system.
Price: $350
27D85DE6-CDA9-44AC-A2B7-6B002E66EA3B_zps
62AF46C6-3F90-4B55-B353-910C8C45D63C_zps

8
Item: Turbosmart FPR 2000
Condition: Fine. Came off my car in working condition.
Price: $200
00DBE98E-AF00-450C-A816-18DA2AF01FED_zps
DE9DAE7B-C8AF-4974-BB9A-23C8858A33F4_zps
7D2BE3AE-B7D5-47B0-924C-2EDD964EA4BA_zps
DE9E0BCE-3DE0-4038-B539-089BEF0B1A9D_zps

 

Cheers,

 

Paul.
 

  • Like 3
Link to comment
https://www.sau.com.au/forums/topic/466289-garage-sale/
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, hydraulic lifters will get noisy if they are dirty/fouled in some way, and exactly how that manifests will depend on exactly what schmutz is where. There is a procedure on here somewhere for dismantling and soaking/cleaning them. Replacing them with new is about 50% of the work and about 5% of the money!
    • Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
    • This seems problematic and unlikely at the same time. Vanilla RB2Xs have hydraulic lifters. They do have "zero" clearance, but only when running with oil pressure inside them. When not running, you should be able to compress them and obtain heaps of clearance. RB26s and Neos have solid lifters. They should have ~0.3mm and ~0.5mm on the inlet and exhaust respectively. If they have zero clearance then bad things are happening. With nothing else being wrong, it would mean that the valves would be held slightly (ever so slightly) open when they are supposed to be closed and it should have all sorts of problems when running, caused by leakage in/out through the valves. Or, zero clearance can indicate severe valve seat recession. None of it is good. Have you used a piece of hose as a stethoscope to try to localise the noise?  
    • Sorry for reviving an old post, but I'm having the same hot idle tick issue. Did anyone ever find out what it was?  I have checked/ replaced Injectors Coils checked Lifter clerance (is at zero) Checked Cam lobes Replaced exhaust gasket and studs Would appreciate any advice this is driving me nuts  
×
×
  • Create New...