Jump to content
SAU Community

Recommended Posts

Hello all,

I'm Ross from Perth and have been a long time reader/ researcher on this forum and have finally become the proud owner of a 1993 Model R32 GTR.

To start off the car is not in good shape the previous owner crashed it into a pole on day one of purchasing the vehicle around 7 years ago with  a fair amount of damage to the passenger side rear quarter and suspension arm it sat in a shed this way until now. I picked the car up 2 weeks ago made some room in the shed then locked it up and flew back up to work so now a month of hanging out wanting to just get home and start on it.

So far I have ordered a whole new left rear quarter panel and glass including mouldings from Ferntree Gully Nissan and used original various suspension arms and rods etc from good old eBay. Also purchased fluids, plugs, vacuum lines and all sorts to clean her up and give it a good going over.

Plan is to repair all the body, give the undercarriage a birthday and change out some suspension components then once it's drive able and re regoed, go all out and build a weapon that can be daily driven or perform round a track. Car was originally silver but has been repainted midnight purple at some point so I plan on keeping this colour also the engine bay is still silver so I can already see myself getting carried away next break and ending up with the engine out ready for a proper respray hence the reason for me creating this thread hopefully it's in the right spot!

So I hope to post progress photo's etc along the way just be patient as I do work away but will make some decent progress each break! 

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

Edited by Rosco
Made error
  • Like 2
Link to comment
https://www.sau.com.au/forums/topic/466408-bnr32-road-to-recovery/
Share on other sites

Managed to pick up a genuine rear spoiler last night off yahoo auctions thanks to import monster as mine didn't come with one! Now just need some skirts and rear pods ?

What would be the best way to take the paint off??

 

image.jpeg

image.jpeg

image.jpeg

image.jpeg

Edited by Rosco
Extra question added
  • Like 1

And some more shopping today genuine gtr 2 piece side skirts from a guy in Perth and in awesome condition can't wait to get home and get it ready to send over to the panel beaters!! Two weeks to go and I can start sharing some decent updates!

 

 

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

Edited by Rosco
  • Like 1

Got a Rear subframe on its way just in case there was any damage to the one on the car I'll get this blasted and powder coated then install some new bushes!

what do you guys recommend for bushes just  whiteline? And normally I go to wilkinson in baysie any other suggestions? If not I'll keep going to them ??

image.png

  • 2 weeks later...

Sweet thanks mate, will hit him up! 

Just a little update will be flying back from work on saturday, finally!! for 9 days anyway.

All the parts have arrived even the new quarter panel that had to come from Japan through Paul at Ferntree Gully parts who has been a huge help and cost me next to nothing for shipping from the east coast to here in Perth. 

meeting Josh from Galvsport on Monday to see where to go, thinking i'll just bite the bullet and get it all done spot on first time round. So first stage get it all fixed and cleaned up running perfect and registered then after a month or so take it back rip the engine out build that and do the engine bay at the same time.

Hopefully have some photo's of it on a trailer enroute to be repaired next week! 

Getting very excited now haha had to vent somewhere as i think the guys at work are getting over me going on about it :banana:

Edited by Rosco
  • Like 1

Small update! spent today draining the fuel tank(fuel was 7 years old so put about 10 litres of new stuff in) and semi stripping the interior out, it gets dropped off at galvsport thursday to remove front subframe and engine along with the rear subframe and whatever else then put onto one of their dolly's then off to the panel shop in around 4 weeks! 

all happening, just going to get the whole lot sprayed and done right the first time including the engine bay!

i'll get some more photo's tomorrow!! 

  • Like 1

Another update, won't be using this shell after inspection by the guys at galvsport decision was made to look at another donor car so as of today all thanks to Josh and Chris's work at Galvsport they have managed to get hold of a much better rolling shell this one is white and still a 93 so happy days same result just a much better shell...

have also done some shopping and scored some other parts from a fellow member here in perth :D

list as follows;

Cusco Front Strut Brace with BCS    
Cusco Rear Strut Brace + Triangulation    
Rocket Dancer Wing Extension    
Silkroad Engine Damper    
Trust type R intercooler    
Trust Interooler piping kit    
Trust Oil cooler kit    
Power steering cooler    
Tomei fuel pump    
Catch can setup    
Trust Rear pods    
Nismo skirts    
Hicas lockout    
Nismo arms/links + bushings.    
Ohlins Coilovers    
Tomei FPR

will update further once work begins!!

Edited by Rosco

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, the latter. No diff should have a centre replaced without checking clearances because its unlikely to be the same as whatever came out. Not that that stops most people just checking a new centre in
    • Major thread necro but how bad of a job is it to DIY? Looking at it online it looks like if you reuse your ring and pinion as long as those are in good condition it should be fine to just pull the axles/front cover and replace the diff that way? Or should I be replacing everything and doing preload measurements/gear mesh testing like the factory service manual mentions for the rear diff?
    • in my list I had the R33 GTR as the best Skyline. Infact I had all GTR's (33>34=32), the NSX, the GTO, the 300ZX, the 180SX, the S15 better than the FD RX7. I had the MR2 and the A80 as 'just' better. I also think the DC5R Integra looks better but this is an 01 onwards car. I also think the FC>FD. It's almost like aesthetics are individual! The elements @GTSBoy likes about the FD and dislikes about the 180 are inverse in my eyes. I hate the rear end of the FD and it's weird tail lights that are bulbous and remind me of early hyundai excels. They are not striking, nor iconic, nor retro cool. The GTO has supercar proportions. I maintain these look much better in person (like the NSX) especially with nice wheels and suspension which is mandatory for all cars pretty much. Some (or all) of these you have to see in person to appreciate. You can't write a car off until you see one in the flesh IMO. Like most people we probably just like/dislike cars which represent certain eras of design or design styles in general. I also think the 60's Jag E type looks HORRIBLE, literally disgusting, and the 2000GT is nothing to write home about. FWIW I don't think the Dodge Viper Gen1's have aged very well either. You can probably see where I rate bubbly coupes like the FD. I know we're straying now but the C4 and C5 absolutely murder the Viper in the looks department as time goes on, for my eyes. Wouldn't surprise me if people who love the FD, also love the MX5, Dodge Viper, Jag E Type, etc etc.
    • I used to hate R31s, and any of the other Nissans that led up to it, and any of the Toyotas with similar styling, because of the boxiness. They were, and remain, childish, simplistic, and generally awful. I appreciate R31s a lot more now, but only the JDM 2 door. The ADM 4 door (and any other 4 door, even if they are unique compared to our local one) can eat a bowl of dicks. The Aussie R31 is also forever tarnished by their association with stereotypical bong clutching Aussie R31 owners of the 90s and early 2000s. I think the Nissans of the 70s (other than 120Y/180B/200B) are far superior looking to the 80s cars. The 240K era Skylines are boss. The same is broadly true of Toyotas. Hondas don't ever register in my thinking, from any era. Mitsus are all horrid shitboxen in any era, and so also don't register. Subarus are always awful, ditto. Daihatsus and Suzukis also don't generally register. They are all invisible. I think the SW20 MR2 looks fiddly. The 3000GT/GTO is like that but way worse. Too many silly plastic barnacles and fiddly gimmicks ruined what could have been a really nice base shape. Kinda-sorta looks like a big heavy ST165 Celica coupe (and I'm not sure if that's a good thing or a bad thing). I think the 180SX is dreadfully bland. It's not bad looking. But it has no excitement to it at all. It's just a liftback coupe thing with no interest in its lines, and bad graphical elements (ie wide expanses of taillight plastic on the rear garnish). The S13 Silvia is a little better - getting closer to R32 shapes. But still....bland. S14? Nope. Don't love it. S15...a little better. Probably a lot better, actually. Benefits from not being like a shrunk in the wash R34 (where the S13 was a shrunk in the wash R32 and the S14 looked like a Pulsar or something else from the stable on Nissan mid 90s horrors). The Z32 was hot as f**k when it came out but hasn't aged as well as the A80. Keep in mind that I think the R33 is the most disgusting looking thing - and out of all the previous cars mentioned is objectively closest to my precious R32. It's just....real bad, almost everywhere you look. And that is down to the majority of what was designed in the 90s being shit. All Nissans from that era look like shit. Most other brands ditto. In that context, the FD absolutely stands out as being by far the best looking car, for reasons already discussed. Going behind the aesthetics, the suspension alone makes it better than almost any other car.  
    • If they just called it the "Mazda Tiffany", it would have been spot on.
×
×
  • Create New...