Rays LMGT2 17x9+16 on R32GTR

[andyseven]

I can't seem to work out if a set of Rays LMGT2 17x9+16 with 255/40/17s  will fit on my R32GTR.

I've searched but can't find anything.

Has anyone fitted Rays LMGT2 17x9+16 on a R32GTR without rolling the guards? I'd like to avoid rolling them.

Any help will be appreciated 

Andy

[djr81]

You will almost certainly foul the rear guard lips with that offset but it depends a little on the tyre (not all 255 are the same width) and your ride height/spring rate/camber setting.

[andyseven]

The Rays will be 14mm further out than the current R34GTR wheel I have now.

I'll measure it and see if there is room, have you fitted +16's on your GTR?

Cool thanks

[djr81]

No I have +22's and without a lip roll and on r comp tyres (wider than road tyres for the same nominal width) they scrape.

16mm is an odd number - you sure it is correct?

[andyseven]

1 hour ago, djr81 said:

No I have +22's and without a lip roll and on r comp tyres (wider than road tyres for the same nominal width) they scrape.

16mm is an odd number - you sure it is correct?

Yeah the guy I'm getting them from said +16, what size tyres are you running?

Ive had conflicting info on if they'll fit. I might just have to roll the guards.

[djr81]

255/40/17

[Navara96]

Should fit easily, I'm running lmgt2's 17x9 +23 all round with 255/40/17 rubber... Though mine is not low ( 100mm from rim lip to guard)  

[niZmO_Man]

C'mon guys, the guards were meant to take 11" slicks

[andyseven]

Getting them Friday so I'll post the result on the weekend.

Thanks for the help

[andyseven]

Finally got around to putting these on my car
17x9+16 with 255/40/17 semi slicks fit with Tein Super Streets wound all the way down. There is only a slight difference in fit to my R34 GTR wheels with 255/35/18s.

The look heaps better will post photos after a wash.

[emoji106]?[emoji322]

[MrStabby]

Listen for scrapes at the back when you corner hard/hit a bump. I had +20s and they scraped at the the back with 255s. Since you'll have 4mm less gap you'll need to get the rear guards rolled.

[andyseven]

It looks too high now but they fit, I think I'll roll the guards and drop it down at some point.

Sorry for the crap photos and dirty car but at least you get the idea.

Sweet

 

 

 

 

 

 

 

 

 

Edited November 10, 2016 by andyseven
bad photos