Jump to content
SAU Community

Recommended Posts

Hi everyone!

I'm new to this forum, i am finding these forums to be very educational and time consuming during work hours :jump:

Just wonder if someone can list what needs to done on a regular say 10,000km service on a R33 Gts-t?

And also can someone recommend somewhere to get my car serviced in Canberra?

Thanks,

Link to comment
https://www.sau.com.au/forums/topic/46650-servicing-your-r33/
Share on other sites

Hi Trader33, welcome.

To service your car, you'll want to:

- Change the motor oil and oil filter... every 5,000kms.

- Change your spark plugs... coppers, every 10k kms, iridiums, much longer. :)

- Change your coolant fluid... erm... umm... I've changed mine twice for the 30k kms I've had my 33, so... every 10k kms? :D

- Change your fuel filter. I get the mechanic to do this whenever I'm getting something else done... or you could do it yourself if you want, @ $15 for the filter... I'd do it at 10k km mark.

Anyone want to add anything on? There's guides here: http://www.skylinesaustralia.com/forums/sh...ead.php?t=35442

Hi Trader33, welcome.

To service your car, you'll want to:

- Change the motor oil and oil filter... every 5,000kms.  

- Change your spark plugs... coppers, every 10k kms, iridiums, much longer. :)

- Change your coolant fluid... erm... umm... I've changed mine twice for the 30k kms I've had my 33, so... every 10k kms? :rofl:

- Change your fuel filter. I get the mechanic to do this whenever I'm getting something else done... or you could do it yourself if you want, @ $15 for the filter... I'd do it at 10k km mark.

Anyone want to add anything on? There's guides here: http://www.skylinesaustralia.com/forums/sh...ead.php?t=35442

isnt the fuel filter every 100,000km? i changed mine, but that was related to a stalling issue.

trader33 - if you live in Canberra then go to All Make Automotive in Garran, beside the Mobil servo or TEZ automotive in Mawson.  Highly recommend them.

I'd also recommend the Mobil servo at Garran - see the thread in the ACT section about servicing :)

isnt the fuel filter every 100,000km? i changed mine, but that was related to a stalling issue.

No, you're thinking of the timing belt. :)

I honestly don't know what the 'correct' period for the fuel filter is, but considering I put (on average) 300-400 liters of fuel (that came from dirty underground tanks) per month into the engine (via a dirty fuel tank from the car), and they're so dirt cheap (pun intended) to buy, it doesn't hurt to change them regularly. Besides, a new filter will eliminate another suspect in tracking down problems.

  • 1 month later...

What Fanny said. :mad:

I've never actually changed a fuel filter myself (don't like getting fuel on me hands)... but you should be able to get a code off the old filter. You don't *really* need 'CODE XYZ' filter, since it's not actually fitting onto anything mechanical like an oil filter fitting onto the side of a block. You just need one that will fit in the hoses snuggly.

I get mine changed by the mechanic and it costs like $12 in 'parts'.

its easy to get one hose off but a pain in the ass to get the other one off.  after hlf an hr of blisters and cursing i just cut the damn thing!!  quite an easy job to do though and i did notice the car to be alot smoother after it.

:werd:

both hoses were a little stubborn on the weekend, patience.....lots of patience (not a stanley knife) got mine off.

placebo or not?!?! seems to be running better.

Shouldn't be too placebic... you're replacing something that was restricting the fuel flow (when it's very dirty)... it should start easier, be smoother, blah blah blah.

Did you have to seal off the hose from the tank, or did you just let it drain out?

i doubt it's placebic (is that a new word??!! nice!) too, genuinely feels better but i am a sceptic at heart.

i didn't seal off the hose, there was a small amount of return from downstream, upstream was no problem. if it wasn't for the goddam @#>*#@ difficult hose removal it would have been reasonably neat. i contemplated plugging the lines after i pulled the filter off but any spillage was well and truly done by then.

best thing to do when changin the fule filter is to remove the fuse for the fuel pumo....then crank the car. IT'll stall once it's used all the fuel in the lines...then put the fuse back in and away u go...no fuel in the lines :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The cross sectional area of a circular hole scales with the square of diameter. So a 2mm diameter hole is 4x the area of a 1mm hole. Not double. The 1.7mm hole is nearly 3x the area of a 1mm hole. You do not need restrictors at both ends of the oil supply line. If you have new, additional restrictors at the turbo end, that you did not have before, then you do not need a restrictor at the inlet end.
    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
×
×
  • Create New...