Jump to content
SAU Community

Recommended Posts

On 9/26/2016 at 5:45 PM, Pearcey said:

Picked up this bad boy over the weekend! 

Definitely sounds a lot better, just need one of Scott's front pipes now and the exhaust side of thing is sorted.

 

IMG_2982.JPG

 

It's hip to be square.

  • Like 1
On 9/26/2016 at 5:45 PM, Pearcey said:

Picked up this bad boy over the weekend! 

Definitely sounds a lot better, just need one of Scott's front pipes now and the exhaust side of thing is sorted.

 

IMG_2982.JPG

 

Lovely.

Having a PNM35, I have occasionally dreamed of having two of those rear mufflers. Don't know if they would fit on the driver side due to spare wheel well though.

Any chance of giving a height, width, depth measurement of the drum (don't worry about the tips) for me?

8 hours ago, iamhe77 said:

Lovely.

Having a PNM35, I have occasionally dreamed of having two of those rear mufflers. Don't know if they would fit on the driver side due to spare wheel well though.

Any chance of giving a height, width, depth measurement of the drum (don't worry about the tips) for me?

380Lx280Wx190H

On 28/09/2016 at 10:15 AM, iamhe77 said:

Lovely.

Having a PNM35, I have occasionally dreamed of having two of those rear mufflers. Don't know if they would fit on the driver side due to spare wheel well though.

Any chance of giving a height, width, depth measurement of the drum (don't worry about the tips) for me?

Two muffler's would look boss, please do it!

Edited by Pearcey
spelling error

I do hope your Hypergear lasts, it's not a job I like doing twice...

 

By the way, the Intense RS is an extremely responsive billet ceramic ball bearing turbo, contrary to Tao's bullcrap above. A lot less shaft play in the bearing too. I have some great video's to show, but didn't want to ruin the poor guy. Let me just say clearances matter. *shakes head* 

 

Scotty the old m35 turbocharger developed with u was a total disaster much to do with your Bunnings mod. looks like u have dogged away from internet for good no. of months. No need dumping shit bucks selling your offers.

Our latest development in M35 system still stands both power and response over yours. While Im a year ahead into rolling out m35 ceramic ball bearings systems when u r only making a start, Plus your re-shafted OEM cores aren't better then a Brand new Garrett.  let time and results speak for them selves. 

 

Now now guys play it nice... I'm gonna stay out of this one, time will be the judge.

Anyway Tao the turbos at your P.o box today I noticed.

Got any front pipes with cats made up yet Scotty? My dump pipes feeling lonely without boys counterpart.

Without out it's counterpart* bloody auto correct.

Anyways, whilst the cars off the road I thought I'd tidy up the engine bay a bit and do some painting, gotta love wrinkle coat :17_heart_eyes:IMG_3075.JPG

Also got these delivered today and gave them a good scrub, got them for a sweet deal just need pads and rotors. Well they were cheap until i knocked one over on my brand new iphone 7 and smashed the hell out of the screen, thats gonna be costly :(.

Now to decide what colour to paint them..

IMG_3081.JPG

  • Like 5
  • 6 months later...

Been a few months since my last post but I got the turbo back in the car a lot easier than I anticipated and have since put a few thousand Ks on it. Definitely has a bit more go on the fast pedal and no more Dyson vacuum noise thank god. Pretty stoked with how the wrinkle coat came out as well as the overall tidy up of the engine bay. Would have been nice to go with Tao's bigger turbo but considering this is just a daily i'm trying to avoid getting to carried away.

IMG_3105.thumb.JPG.3a6323e560c059f5bdbd534dcfeff309.JPGIMG_3109.thumb.JPG.df29ad220d6d5596a0edc3588164a06c.JPGIMG_3113.thumb.JPG.df8377e5ab9cc9559248a56570772b2c.JPG

 

Also got the R34 calipers on the car along with some QFM HPX pads and DBA T3 rotors. This is by far the biggest improvement on the car so far considering how woffle the stock brakes are on these things, wouldn't mind swapping out the mastercylinder in the future to make them feel a bit more touchy but for now im very happy with the improvement.

IMG_3098.thumb.JPG.506327040ff4fb6d496db29cc258dae6.JPG5905a45e0db7c_WGZK0704(2).thumb.jpg.7aaa59fb8b4c3a27c7e2b101da1a893c.jpg

  • Like 2

Bit of a picture spam tonight but I also added a HDI inter-cooler while I had the car apart. Cant recommend the kit enough especially for the price, everything bolted and fitted up perfect. I'd recommend changing the rubber joiner in front of the throttle body as seen in my last post, mine was all hard and deteriorated and i'd imagine most others would be in similar condition.

IMG_3891.thumb.JPG.6a1098fdbcb1800ff657f91749b777d3.JPGIMG_3896.thumb.JPG.5243cea561e345b9eb66de8c437a6312.JPG

  • Like 4

Yeah there's a bit of a trick to getting it consistent, there's a post on here somewhere where someone went into detail coating some RB26 covers which is good for some pointers. A heat gun is a must imo.

As for the T3 slotted cant remember exactly how much they cost, my missus works for an auto parts store that stocks them so I got them for half price luckily.

Edited by Pearcey
5 hours ago, West said:

Is there a correct procedure of doing to wrinkle paint? 

Also what's the cost of the T3 slotted, need to change mine soon i think.

 

Cheers

The surface needs to be roughed up, Scotchbrite pads are good but sandblasting works the best.
Wipe the whole part down with thinners or the like so the paint will stick.
A heat gun is a bad idea to try make crinkle as it makes the paint really tacky, What I have found works best is a fan blowing over it or putting it in front of an air con on heat around 24deg to dry it, but also develop a consistent crinkle effect.
Bake the part in the oven to cure it but beware as it stinks when proper heat gets into it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That ring thing is interesting how it's holding everything together 
    • Hey guys. I have a 400R on its way to Australia from Japan currently and have a few questions I’m hoping others may be able to help with.   Wondering if anyone here has had any luck getting the Sat nav unit to work in Australia!? Assuming the Stereo is as simple as a band expanded and tv won’t work?  Seeing as they’re based off a Q50 which is Aus delivered is there any way to link that system to the nav? Nav modules and head unit are different part numbers and appear slightly different at the rear with plug ins etc. can I put my xtrail sd card into the rv37 and will that convert the maps or update to Australian? Has anyone got any advice here?     also has anyone fitted the factory remote start and Security system once it’s landed in Australia? I put an enquirey to Nissan Japan in via a third party, and they suggested it needs a Nissan Japan dealers device to setup and couldn’t guarantee if one here could do it or not. They can supply and I can physically fit it but to setup I would need a dealers device. Any information here would be appreciated also. I’ve seen one here with it fitted already prior to leaving Japan at a dealer/inporter, so clearly passes compliance and works when fitted Japan and doesn’t need changing here.      also, does the tyre inflation sensors work here? Does anything change with them when the vehicle arrives? Where are they actually situated? I’ve read they have batteries and they need to changing at times and seems like resetting involves the nav system?    any help here would be appreciated and any other aust specific information to help would be great. Looking forward to see what the current generation skyline is like and eager to see how many of the gadgets can be utilised here.  Thanks in advance 
    • Do need to take it with a pinch of salt. One of the adapter failures, they clearly had setup issues with the flywheel.  One of the slipping ones I spoke to and it was pretty clear the throwout was riding, rather than fix, just swapped to a new clutch.    These clutches are being put in anything from 5k offroad 4x4 beaters, GR yaris, 500hp commodores to 1200hp barra monsters. Bound to be some issues in some of them when they are not a simple bolt in affair due to the changes in height.    There is a lot going on in this picture and unless I did the job myself no way to tell what really happened. 
    • I did this mod in 2019  You just have to modify the top bracket of the ABS/TC/Fuel Pump Control ECU so it sits more upright and closer to the back seat and run a good quality positive battery lead from the engine bay, the negative lead i just bolted down to the body in the boot.
    • Damn... Not the feedback I want to hear.
×
×
  • Create New...