Jump to content
SAU Community

Recommended Posts

They are a "Thule" brand Rack but could not find anything at all for a 2 Door skyline (which wasn't surprising) So I had to buy a rack for a Toyota Yaris, cut the mounts up and modify them and moulded new feet out of silicon sealant so they matched the roof profile properly :)

  • 3 weeks later...

Yep that was me, Had just left Brisbane and was heading for Sydney :)

Extremely happy with the GTR, Over 8000km across all but one of Australia's Territory's with the only issues we had being:

-Clutch clevis pin popped out, must have been missing the split pin (5 minute fix)
-Horn jammed on when I turned steering full lock, have not investigated why yet, just pulled the relay for now (1 min temp fix)
-One of the adjustable castor suspension arms unwound itself after we went off road for about an hour down one of the tracks SIRI sent us down making the steering wheel 1/4 way off center (15 min fix)
-Close call with a small roo/other car
-Too low for the crazy eastern states driveways that dip 1000meters into the gutter, even tho the car isn't that low! (scratched up the front lip)

Best we got was 11.3L / 100km with the average around 11.7L/100

 

Tassie Trip.jpg

  • Like 2
  • 2 weeks later...
  • 3 weeks later...

So had a good look under the car just inspecting for any damage/wear from the trip... Besides being absolutely filthy (dirt/dust) everything seemed pretty good, being aftermarket arms with heim joints I pulled them all apart and gave them a clean out... Found abit of crap got into one of the rear traction arms and noticeable wear on the rod end so will replace that.

Also found the drivers side outer steering tie rod had abit of play... I happened to find these tie rods on UAS which they say help fix some of the bump steer issues when you lower the car.

http://www.uniqueautosports.com.au/Parts-Shop/front-bump-steer-correcting-tie-rod-ends-584.aspx

But then found these from the guys at Shift Performance Parts, Inner and outer rods that look identical.

https://www.shiftperformance.com.au/product/n1-suspension-nissan-skyline-r32-r33-gtr-gts4-14mm-steering-tie-rods-ends-2/

Anyway bolted it all up today no probs, (obviously changed both driver and passenger sides)

Original:

IMG_1114.JPG

"N1" Parts, The angle that the balljoint is mounted on the end of the tie rod was quite different compared to stock.

IMG_1117.JPG

Another interesting this was the inner tie rods had "rack spacers" built into them, Unlike the originals which I purchased a pair of "rack spacer washers" from GKtechIMG_1118.JPG

Setup the toe as best I could with a tape measure, will book for an alignment next week

  • Like 1

So my gearbox wasnt doing so well, 1st Gear was terribly hard to engage even at a complete stop and If I tried to shift into 4th or 5th gear at anything other then grandma speeds she would crunch crunch... even worse at higher RPM.

So abit of research many people recommended "Redline Shockproof gear oil" Now I had recently replaced the oil with some Penrite stuff not too long after getting it licensed and even added some additive (cant remember what it was but supposedly gave smoother shifts etc) so I was a little sceptical that the Redline stuff could be that much better.

Oh how wrong I was... Took it for a fang and not even the slightest crunch! 1st gear is even easy to engage! this stuff is truly Magic!

redline-lightweight-shockproof.jpg

  • Like 1
I was a little sceptical that the Redline stuff could be that much better.
Oh how wrong I was... Took it for a fang and not even the slightest crunch! 1st gear is even easy to engage! this stuff is truly Magic!
redline-lightweight-shockproof.jpg


I hear that!

My gearbox was woeful changing down to 4th but after it was changed to redline it was a different car.

It really only masks the problem and I know that I will be up for a new gearbox but it has lasted a year and hasn't gotten any worse (yet).
  • Like 1
  • 3 weeks later...

Small update, I bought myself a early x-mass present in the form of a Whiteline adjustable front & rear swaybar kit :)

New Vs Old (had already fit the front one before I took a pic)

1118.jpg

Rear Fitted:   (underbody still filthy from the road trip)

1146.jpg

Front fitted:

1147.jpg

Also picked up and fit a set of solid steering rack mounts:

1119.jpg

Last not least, the exhaust system had two mufflers... which was great for passing pits and not annoying the gray nomads at the caravan parks while on the road trip but decided to delete the center muffler hoping for abit more of a note.

Section comparison:

1131.jpg

Didn't have any bends and since it was only one decided to just lobster it:

1133.jpg

1134.jpg

Idle was noticeably louder and deeper as expected, Is noticeably louder while driving but surprisingly not all that much. Only been around the block a few times so cant comment on the swaybars/steering rack bushes just yet... Will take it out to some twisties tomorrow :)

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Major thread necro but how bad of a job is it to DIY? Looking at it online it looks like if you reuse your ring and pinion as long as those are in good condition it should be fine to just pull the axles/front cover and replace the diff that way? Or should I be replacing everything and doing preload measurements/gear mesh testing like the factory service manual mentions for the rear diff?
    • in my list I had the R33 GTR as the best Skyline. Infact I had all GTR's (33>34=32), the NSX, the GTO, the 300ZX, the 180SX, the S15 better than the FD RX7. I had the MR2 and the A80 as 'just' better. I also think the DC5R Integra looks better but this is an 01 onwards car. I also think the FC>FD. It's almost like aesthetics are individual! The elements @GTSBoy likes about the FD and dislikes about the 180 are inverse in my eyes. I hate the rear end of the FD and it's weird tail lights that are bulbous and remind me of early hyundai excels. They are not striking, nor iconic, nor retro cool. The GTO has supercar proportions. I maintain these look much better in person (like the NSX) especially with nice wheels and suspension which is mandatory for all cars pretty much. Some (or all) of these you have to see in person to appreciate. You can't write a car off until you see one in the flesh IMO. Like most people we probably just like/dislike cars which represent certain eras of design or design styles in general. I also think the 60's Jag E type looks HORRIBLE, literally disgusting, and the 2000GT is nothing to write home about. FWIW I don't think the Dodge Viper Gen1's have aged very well either. You can probably see where I rate bubbly coupes like the FD. I know we're straying now but the C4 and C5 absolutely murder the Viper in the looks department as time goes on, for my eyes. Wouldn't surprise me if people who love the FD, also love the MX5, Dodge Viper, Jag E Type, etc etc.
    • I used to hate R31s, and any of the other Nissans that led up to it, and any of the Toyotas with similar styling, because of the boxiness. They were, and remain, childish, simplistic, and generally awful. I appreciate R31s a lot more now, but only the JDM 2 door. The ADM 4 door (and any other 4 door, even if they are unique compared to our local one) can eat a bowl of dicks. The Aussie R31 is also forever tarnished by their association with stereotypical bong clutching Aussie R31 owners of the 90s and early 2000s. I think the Nissans of the 70s (other than 120Y/180B/200B) are far superior looking to the 80s cars. The 240K era Skylines are boss. The same is broadly true of Toyotas. Hondas don't ever register in my thinking, from any era. Mitsus are all horrid shitboxen in any era, and so also don't register. Subarus are always awful, ditto. Daihatsus and Suzukis also don't generally register. They are all invisible. I think the SW20 MR2 looks fiddly. The 3000GT/GTO is like that but way worse. Too many silly plastic barnacles and fiddly gimmicks ruined what could have been a really nice base shape. Kinda-sorta looks like a big heavy ST165 Celica coupe (and I'm not sure if that's a good thing or a bad thing). I think the 180SX is dreadfully bland. It's not bad looking. But it has no excitement to it at all. It's just a liftback coupe thing with no interest in its lines, and bad graphical elements (ie wide expanses of taillight plastic on the rear garnish). The S13 Silvia is a little better - getting closer to R32 shapes. But still....bland. S14? Nope. Don't love it. S15...a little better. Probably a lot better, actually. Benefits from not being like a shrunk in the wash R34 (where the S13 was a shrunk in the wash R32 and the S14 looked like a Pulsar or something else from the stable on Nissan mid 90s horrors). The Z32 was hot as f**k when it came out but hasn't aged as well as the A80. Keep in mind that I think the R33 is the most disgusting looking thing - and out of all the previous cars mentioned is objectively closest to my precious R32. It's just....real bad, almost everywhere you look. And that is down to the majority of what was designed in the 90s being shit. All Nissans from that era look like shit. Most other brands ditto. In that context, the FD absolutely stands out as being by far the best looking car, for reasons already discussed. Going behind the aesthetics, the suspension alone makes it better than almost any other car.  
    • If they just called it the "Mazda Tiffany", it would have been spot on.
    • Yup but for me its the HR ! Cut my teeth on the old holden 6s in the day ! And here's me thinking in the day it was also the 300ZX and the Mitsubishi GT3000 ! All, as well had good lines, but always seemed to need finishing off, style wise.
×
×
  • Create New...