Jump to content
SAU Community

Recommended Posts

9 hours ago, defibf said:

I have used old fashioned cmos ic’s for this sort of thing CD4022B should get the job done, and no surface mount soldering required ??

I've had it suggested to me that a 74GC393 would do the trick, i'm just trying to get my head around if i need to do more than just give it 5v power, ground, the signal and then take the signal from the 3rd output and send that straight to the ECU, or if I need some other kind of input to it aswell?

 

edit: so it seems i need to give it a a 'reset input' (pin 2), would i be correc that that's just another 5v input?

7 hours ago, sneakey pete said:

I've had it suggested to me that a 74GC393 would do the trick, i'm just trying to get my head around if i need to do more than just give it 5v power, ground, the signal and then take the signal from the 3rd output and send that straight to the ECU, or if I need some other kind of input to it aswell?

 

edit: so it seems i need to give it a a 'reset input' (pin 2), would i be correc that that's just another 5v input?

Pretty sure that these will be ok with 15v supply 

data sheet 

http://www.ti.com/lit/gpn/cd4017b

just off to work, i will have a check this evening ?

 

  

 

13 hours ago, defibf said:

Pretty sure that these will be ok with 15v supply 

data sheet 

http://www.ti.com/lit/gpn/cd4017b

just off to work, i will have a check this evening ?

 

  

 

I looked through my box file of useful ccts, the ic i have used in the past as a divide by 8 device is below, this is the exact cct i used so I know that it works fine, excuse the fag packet drawing

i/p = r2

r1 = 12r

r2 = 100r

c1& c2 = 0.1 uF

D1 = zener bzx85c12

4040divideby8.jpeg

Edited by defibf
edited as i forgot i/p
  • Thanks 1

Time to unlock the 'high boost'  :)

Comparison to the RX7 below (both in 3rd gear) Evo had some traction issues though ! Got the response good now after lots of fundamental checking of the ideal cam advance on the MIVEK.

 

100-150 3rd.jpg

Another interim update of the performance relative to the 'big block' Datsun  :)

Sorting through a few items however got the same power and speed on lower boost today with some more tweaking, adjusting each cylinder to optimum... anyway here is previous days with slight miss fire *excuses!* will optimize some more. Just need to find some spare time to run at the test track and pump it up to 3600mB ;)

 

IMG_8032.thumb.jpg.b751e91c97b6b888bc1e5964898057b0.jpg

100-185 R34.jpg

100-185 EVO9.jpg

1 hour ago, burn4005 said:

Swap to some Denso IK01-24 or NGK R7434-8 plugs and you won't look back.

oh wait, are you still talking evo or RB?

EVO, old mate ran them at stock gap from what I can tell in picture though.

Current running for the nerds out there?

Bleed about 10% out wg, PR ~ 4.2:1 ~74lb/hour flow ~108k rpm 900 egt, TEP, TIP will keep to our selves see who can work it out lol...... Engine makes around 750bhp based off the performance listed, or around 14 million rwkw on lebtechomodynamics depending on tires + tie down methods + kebabs consumed

  • Haha 2

Just for anyone else interested in the new black series. Turbosource.com have them advertised and priced on their page in the US. They have said to me that the turbos are currently getting assembled and should be ready to ship end of February. The guys seemed relatively good to deal with and have some interesting stuff in the works for the RB and efr. Ill reserve the rest of my judgement until the turbo turns up. Maybe worth a look. anyway.

8474, 9274, 9280 have not started shipping yet.  I expect this will happen this week.

if anyone has a turbo already its a pre production unit, they have not started shipping as of right now

  • Like 1
5 hours ago, Full-Race Geoff said:

8474, 9274, 9280 have not started shipping yet.  I expect this will happen this week.

if anyone has a turbo already its a pre production unit, they have not started shipping as of right now

Ahh ok, didn't realise it was pre-production.   Still, sounds like it's close :)

11+ minutes on load on the EVO (66 x 10 second homo 'passes' LOL) on 19 hours and 50 minutes to go. We increased the performance even more, logs in next few days time permitting, maybe  even a video ;)

Overall the EFR9174IWG and complete kit from Full Race (thanks Geoff) is a great balance of response and power. Can run 'Full Race Boost' with no tappering to 9000rpm (up to ~40psi gauge pressure).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Major thread necro but how bad of a job is it to DIY? Looking at it online it looks like if you reuse your ring and pinion as long as those are in good condition it should be fine to just pull the axles/front cover and replace the diff that way? Or should I be replacing everything and doing preload measurements/gear mesh testing like the factory service manual mentions for the rear diff?
    • in my list I had the R33 GTR as the best Skyline. Infact I had all GTR's (33>34=32), the NSX, the GTO, the 300ZX, the 180SX, the S15 better than the FD RX7. I had the MR2 and the A80 as 'just' better. I also think the DC5R Integra looks better but this is an 01 onwards car. I also think the FC>FD. It's almost like aesthetics are individual! The elements @GTSBoy likes about the FD and dislikes about the 180 are inverse in my eyes. I hate the rear end of the FD and it's weird tail lights that are bulbous and remind me of early hyundai excels. They are not striking, nor iconic, nor retro cool. The GTO has supercar proportions. I maintain these look much better in person (like the NSX) especially with nice wheels and suspension which is mandatory for all cars pretty much. Some (or all) of these you have to see in person to appreciate. You can't write a car off until you see one in the flesh IMO. Like most people we probably just like/dislike cars which represent certain eras of design or design styles in general. I also think the 60's Jag E type looks HORRIBLE, literally disgusting, and the 2000GT is nothing to write home about. FWIW I don't think the Dodge Viper Gen1's have aged very well either. You can probably see where I rate bubbly coupes like the FD. I know we're straying now but the C4 and C5 absolutely murder the Viper in the looks department as time goes on, for my eyes. Wouldn't surprise me if people who love the FD, also love the MX5, Dodge Viper, Jag E Type, etc etc.
    • I used to hate R31s, and any of the other Nissans that led up to it, and any of the Toyotas with similar styling, because of the boxiness. They were, and remain, childish, simplistic, and generally awful. I appreciate R31s a lot more now, but only the JDM 2 door. The ADM 4 door (and any other 4 door, even if they are unique compared to our local one) can eat a bowl of dicks. The Aussie R31 is also forever tarnished by their association with stereotypical bong clutching Aussie R31 owners of the 90s and early 2000s. I think the Nissans of the 70s (other than 120Y/180B/200B) are far superior looking to the 80s cars. The 240K era Skylines are boss. The same is broadly true of Toyotas. Hondas don't ever register in my thinking, from any era. Mitsus are all horrid shitboxen in any era, and so also don't register. Subarus are always awful, ditto. Daihatsus and Suzukis also don't generally register. They are all invisible. I think the SW20 MR2 looks fiddly. The 3000GT/GTO is like that but way worse. Too many silly plastic barnacles and fiddly gimmicks ruined what could have been a really nice base shape. Kinda-sorta looks like a big heavy ST165 Celica coupe (and I'm not sure if that's a good thing or a bad thing). I think the 180SX is dreadfully bland. It's not bad looking. But it has no excitement to it at all. It's just a liftback coupe thing with no interest in its lines, and bad graphical elements (ie wide expanses of taillight plastic on the rear garnish). The S13 Silvia is a little better - getting closer to R32 shapes. But still....bland. S14? Nope. Don't love it. S15...a little better. Probably a lot better, actually. Benefits from not being like a shrunk in the wash R34 (where the S13 was a shrunk in the wash R32 and the S14 looked like a Pulsar or something else from the stable on Nissan mid 90s horrors). The Z32 was hot as f**k when it came out but hasn't aged as well as the A80. Keep in mind that I think the R33 is the most disgusting looking thing - and out of all the previous cars mentioned is objectively closest to my precious R32. It's just....real bad, almost everywhere you look. And that is down to the majority of what was designed in the 90s being shit. All Nissans from that era look like shit. Most other brands ditto. In that context, the FD absolutely stands out as being by far the best looking car, for reasons already discussed. Going behind the aesthetics, the suspension alone makes it better than almost any other car.  
    • If they just called it the "Mazda Tiffany", it would have been spot on.
    • Yup but for me its the HR ! Cut my teeth on the old holden 6s in the day ! And here's me thinking in the day it was also the 300ZX and the Mitsubishi GT3000 ! All, as well had good lines, but always seemed to need finishing off, style wise.
×
×
  • Create New...