Jump to content
SAU Community

Recommended Posts

here you go guys. 

BW 8374 1,04

Built head with studs, gasket, springs blah blah

Stock bottom end

HKS 256 drop in cams

CRG split pulse manifold

e85 

504kw at 30psi. I told tuner to cap it at 30psi due to stock bottom end. Should see another 30-50kw with 4-5 more psi.

30psi around 4600rpm.

Its a little laggier than my mechanics (he gets 33psi by around 4400rpm), which I think could be due to having a massive 60mm old tech gate or perhaps due to it not being a built motor.

Still a bucket load off fun. Starts to wind up around 3k and really picks up boost 4k

Dyno run below and dyno sheet attached.

 

dyno.png

  • Like 2
15 minutes ago, Sub Boy32 said:

I put a thread up asking the Mods to open up the EFR thread again......they just deleted my post.

 

Seen it. Half the reason why I made this.

  • Like 2

Someone had to start it again, lets hope it does not get bogged down with BS ?

But it is hard to find info on the EFRs ?

I think because there are so many build types for Skylines now ranging from stock  to over 3.2Lt , it is also hard to have back to back comparisons.

But from what I can find out,  the EFR8374 will get me going quicker, with a much better transient response and roughly to the same top HP as my PT6266 Gen 2 ?

Hopefully some back to back comparisons :)

Want to see comparison with -5's. LOL, only joking.

It would be good this time if the bullshit comments are kept to a minimum and maybe another thread started for bw only dyno results. Just so there's a place for chit chat and one for results. The old thread did lack results. Just a suggestion. Carry on[emoji106]

  • Like 1
4 hours ago, usmair said:

here you go guys. 

BW 8374 1,04

Built head with studs, gasket, springs blah blah

Stock bottom end

HKS 256 drop in cams

CRG split pulse manifold

e85 

504kw at 30psi. I told tuner to cap it at 30psi due to stock bottom end. Should see another 30-50kw with 4-5 more psi.

30psi around 4600rpm.

Its a little laggier than my mechanics (he gets 33psi by around 4400rpm), which I think could be due to having a massive 60mm old tech gate or perhaps due to it not being a built motor.

Still a bucket load off fun. Starts to wind up around 3k and really picks up boost 4k

Dyno run below and dyno sheet attached.

 

dyno.png

Are you running E85?

Good to see this thread back in action!

 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm not up to date on the latest, but for basic modifications like pod filter, lower springs etc you can get a modification permit at the time of inspection.  For more serious modifications you will need engineering.  Intercoolers used to fall into the mod permit rule but its been a long while since i looked it up.   Either way you will be able to get it registered, just a case of $300 vs $3k . 
    • Hi everyone! I’m the new owner of a 1996 R33 GTS-T, I’ve purchased this car over from Queensland and brought it to Western Australia and I’ve found that there is a hole cut out in the engine bay for the FMIC that enters into the wheel well (fender liners are in the boot). For anyone that has had to get their car over the PITS here, will this be a major issue?   
    • Yeah I've spotted this one too, whenever it's lotto superdraw week and I'm browsing car sales dot com for my new ride They must be dreaming, maybe it's worth 150k for the link to Brock?
    • 100% accurate!  We are a pack of know it alls....  But, I bet people go to you when they have a problem! I've been on a bit of a clean up rampage too over the past month!  I've thrown more shit in the bin over the past 2 weeks than I have in the past 3 years combined! Anyway, it's all good fun being different! My wife sometimes does not agree!  
    • ADHD in all form isn't about "can focus, or can't focus" or is hyper active or isn't etc.   It's all a dysregulation. Either time feels to be stationary, or time just vanishes in a split second. We are either under focussed on the task at hand (as we're over focussed on our surroundings) or we have no idea an atomic bomb went off beside us as we're so hyper focussed and locked in on things.   Not to mention the rapid fire thought process. What it takes a "normal" process to think up a solution to a problem, ADHD will be able to give you 5 different ways to solve the problem, and the pros and cons of each. While we can be highly impulsive and lack the ability to "control ourselves" we can also become paralysed with the inability to make a decision for ourselves. While most of us have an OCD like requirement for perfection, we lack the ability often to remain focussed to get things to a perfect state. Those with undiagnosed ADHD as adults, can often find the last part actually stops them ever attempting to do things that they have the ability to do, as the reasoning is often "if I can't do it perfectly, it's not worth doing"   As for projects... Ha ha ha, I still need to take the other half of my wall trim down in the Fiance's office so I can paint it. Need to finish digging and running the back yard drains, my R33, getting the Ninja bike registered (now being sold), the moped project, fixing either of the lawn mowers so they're reliable, along with a myriad of other things.   It's why I've been going through lately and just being brutal and clearing projects off that I won't actually ever complete. IE, moped will go to the tip, or be given away, bike is being sold, Subaru project being sold, some parts for other projects given away. Or I've been making myself focus on one thing at a time, by ticking off the smallest quickest ones first.   There's also a reason by our mid twenties we seem to be "know it alls", as we've all been down some of the weirdest and oddest rabbit holes when you follow the dopamine trail. It's often also why we're more a jack of all trades, but not a master of one.   However, pretty much all of my hobby projects, in one way or another, all come back around to automotive. That's my zen area.
×
×
  • Create New...