Jump to content
SAU Community

Recommended Posts

R34 GT-R/S13 Shed Clean Out

Removed due to upgrade/replacement. Haven't fully separated/cleaned things up yet. Can take more pics as needed. 

R34/RB26
- RB26 Stock manifolds - $20
- Stock manifold shields - $10 
- 3" mid pipe with flanged stock Nissan cat and basic mid muffler into 3.5" rear pipe/muffler section with cannon. Can only see a Jasma label on it - SR. Came of 34, but will fit 33 with minimal mods - $250
- R34 Standard fuel pump. $40
- R34 AFMs $80
- Standard Cam Gears. $10
- R34 Non Vspec air guides for brakes. $200
- R34 GTT Console ilid skin, mint condition. Hinge and leg no good though. $80
- R34 GTR Intercooler, with IAT bung - $150

S13 - Free/6pack/whatever
- S13 CA18 Viscous Centre and 6 bolt shafts.
- Carpet
- Roof lining, 
- Lots of interior plastics
- Interior light
- CA18 Cam Gears
- CA18 Intake Cam
- CA18 AFM and plug.
- a TPS 
- Washer fluid bottle and neck
- Standard space saver. 
- CA18 carbon canister
- Rear toe arms
- Rear camber arms
- Leaking power steering rack that includes the rack ends (the rack ends might be S15 ones as I used an S15 rack and some bits from the S13 rack ends/tie rods.

I can assist with fairly cheap postage or pickup is fine. 

Make an offer, take a bulk lot for cheap, just want it all gone. 

Located in Wodonga.

20160713_204437 - Copy.jpg

20160713_204500 - Copy.jpg

1781991_10153020849864838_3514603332411833073_n.jpg

1798587_10153020850144838_8024175036633856112_n.jpg

10409384_10153020849734838_6685983592959906770_n.jpg

10481400_10153020850684838_5401655646313188229_n.jpg

10533763_10153020850069838_2916721149236401057_n.jpg

10565029_10153020850654838_899619547002219010_n.jpg

10590634_10153020849684838_8230338806825501049_n.jpg

13413113_10154903661579838_4334800780126316981_n.jpg

20160221_135644.jpg

post-23873-0-36695800-1455850926.jpg

Link to comment
https://www.sau.com.au/forums/topic/466640-r34-gt-rs13-shed-clean-out/
Share on other sites

  • 2 weeks later...

Don't have the mirror triangles. 

 

See pics of carpet, has been cut up on the tunnel under the dash and has some small blemishes under the drivers mat. 

 

14202842_10155146415134838_422422955_o.jpg

14203627_10155146422564838_714763474_o.jpg

14233881_10155146422634838_996865052_o.jpg

14247745_10155146422589838_1894487609_o.jpg

14248048_10155146415264838_1848447887_o.jpg

  • 3 weeks later...
  • 2 weeks later...

Exhaust isn't actually 3" mid as thought. 

List updated with new parts/things removed that have sold. 

 

Removed due to upgrade/replacement. Haven't fully separated/cleaned things up yet. Can take more pics as needed.

R34/RB26

- Greddy air diversion panel - $100
- Stock manifold shields - $10 
- 2.75" mid pipe with flanged stock Nissan cat and basic mid muffler into 3.5" rear pipe/muffler section with cannon. Can only see a Jasma label on it - SR. Came of 34, but will fit 33 with minimal mods - $200
- R34 Standard fuel pump. $40
- Standard Cam Gears. $10
- R34 Non Vspec air guides for brakes. $200
- R34 GTT Console ilid skin, mint condition. Hinge and leg no good though. $80
- R34 GTR Intercooler, with IAT bung - $120
 

S13 - Free/6pack/whatever
- S13 CA18 Viscous Centre and 6 bolt shafts and diff cover. 
- Carpet
- Roof lining, 
- Interior light
- CA18 Cam Gears
- CA18 Intake Cam
- CA18 AFM and plug.
- a TPS 
- Washer fluid bottle and neck
- Standard space saver. 
- CA18 carbon canister
- Rear toe arms
- Rear camber arms
- Traction rods

I can assist with fairly cheap postage or pickup is fine.

Or take a bulk lot for cheap.

Located in Wodonga.

  • 1 month later...

List update, pic update. 
 

R34/RB26

- Greddy air diversion panel - $80
- 2x Stock manifold shield sets - $10 
- 2.75" mid pipe with flanged stock Nissan cat and basic mid muffler into 3.5" rear pipe/muffler section with cannon. Can only see a Jasma label on it - SR. Came of 34, but will fit 33 with minimal mods - $150
- R34 Standard fuel pump. $40
- Standard Cam Gears. $10
- R34 Non Vspec air guides for brakes. $100
- R34 GTT Console ilid skin, mint condition. Hinge and leg no good though. $50
- R34 GTR Intercooler, with IAT bung - $120
- Properly baffled catch can with sump drain, was $200 new, never used only test fitted. $150
 

S13 - Free/6pack/whatever
- S13 CA18 Viscous Centre and 6 bolt shafts and diff cover. 
- S15 crown wheel. 
- Carpet
- Roof lining, 
- Interior light
- CA18 Cam Gears
- CA18 Intake Cam
- CA18 AFM and plug.
- a TPS 
- Washer fluid bottle and neck
- Standard space saver. 
- CA18 carbon canister
- Rear toe arms
- Rear camber arms
- Traction rods
- S13 and S14/15 RLCAs.
- S13 Castor arms.
- S13 and S15 Tie rod ends.

I can assist with fairly cheap postage or pickup is fine.

Or take a bulk lot for cheap.

Located in Wodonga.

20151202_210851.jpg

20161218_140006.jpg

20161218_140030.jpg

20161218_140147.jpg

20161218_140219.jpg

  • 4 weeks later...
  • 5 weeks later...

Forgot to add

2x full sets. 17x8 and 17x9 multi stud. One set has 235 RS-Rs on them with a bit of tread left.

I need some 4stud/multi stud 17x9 all round that will clear 4 pot brakes on a Silvia.

 

20170121_213546.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for that.... If only I could do something once and be happy with that, like some people do....
    • I had no transmission at all so I managed to find a big box manual gearbox from an R34 GTT for an insanely good price in EU. I converted it to push type which cost more than the transmission almost, with parts from Amayama! These engines are very strong and can put out decent power with a properly sized turbo. You can save on money from parts like pistons and rods, and invest those in the transmission and other parts. I suggest you join the RB20 Enthusiasts facebook group, plenty of info and almost daily posts there about 20DE/DET/Neo+T builds. (I hope I'm not breaking any forum rules by mentioning third party platforms, just trying to help the buddy out)
    • Yeah, having tried all of those methods including BBQ+recipro/hacksaw, I ended up buying a bush press kit under $150 that works well, like this: https://www.ebay.com.au/itm/355967727167?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=sfmmuhxgqhm&sssrc=2047675&ssuid=dJvnaZ11TB-&widget_ver=artemis&media=COPY It basically has a range of pushers and cups with threaded rods between to press out a range of large bushes. The problem with any sawing solution is minimising damage to the subframe side, although it probably needs a quick sand afterwards no matter what solution you try due to damage
    • Hi. Thanks for the answer. I do not have instagram 😄 I too considering turbo the RB20DE NEO 🙂 But i think i upgrade the gearbox first or at least buy new.  
    • Just pulled the passenger apart so got a good idea, also the side bracket that pivots the top half is completely cooked.. how I don’t know.. haha and paid $400 also included a photo of the passenger seat! She is mint
×
×
  • Create New...