Jump to content
SAU Community

Recommended Posts

what is the $12000 special duty?

anyone who reads any of the news about proposed changes to importing legislation couldn't fail to notice continual references  (by journalists) to the fact that "...the special duty of $12000 will also be abolished"

i am utterly convinced that journalists....politicians....department heads....and public servants alike have zero understanding of what they are talking about.

whilst I've actually reviewed the very legislation that makes reference to this duty....i have no idea under what circumstances it would be applied.

I've even written to customs requesting clarification and....as one would expect.....they are far too busy as public servants to actually ....serve the public.

 

can anyone enlighten me as to when and why this duty may be applied...as opposed to the standard 5% duty on purchase price...and 10% GST on landed cost?

Link to comment
https://www.sau.com.au/forums/topic/466706-what-is-the-12000-special-duty/
Share on other sites

It's actually more of a fine or penalty rather than an import duty as such. This would be applied if you imported a vehicle without having approval through normal channels, however you would still not be allowed to keep the car either so it's not a loophole to allow import of otherwise ineligible cars as some people believe .. long story short, it has rarely ever been relevant to anyone so it makes sense to scrap it as an outdated bit of legislation anyway.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
    • Oh yes done this when the window started flopping around.  Turns out the guides that run along the rail chanel had crumbed way. Took off the door card and pulled out the window mech, then the window, which you have to pull out through the top. As said unbolt the guide rail and don't spend 30 minutes getting frustrated trying to find a way to slide it out upwards cause that don't frigging work. Drop it down and out through the door hole. All I did to repair it was slice some 10mm clear plastic tube, vertically, then screw it to the guide rail both sides. This tubing rolls inward on both sides and leaves a gap wide enough to hold the window. To finish all I did was lube the plastic tube with olive oil and Bob's your uncle . . . well if he has the operation he can be your Aunt ! !  10 bucks in plastic tube and another 5 minute job done again . . . . YEH BULLSH#T ! My love for Skylines knows no bounds !
    • So was there a solution to this problem? I’m having this issue now. 
    • not expensive, just irreplaceable if you don't go sub 60 at wakie in that thing people will start talking
    • I haven't replaced that, but I have had the doors apart on the r32 a couple of times The door skin will be held on by a combination of clips and bolts, just take it slowly and make sure all the sneaky hidden bolts are out Once the skin is off you should be able to pop that piece off pretty easily, looks like there are only 2 bolts holding it on
×
×
  • Create New...