Jump to content
SAU Community

Recommended Posts

Hi all,

Made some major changes to the car so the following parts are up for sale:

 

R34 GTt APEXi power FC with commander and boost controller- $700

PFC with hand controller, boost control kit harness, 3 bar pressure sensor and solenoid, great plug and play ecu and boost controller without having to cut and shut stock wiring, good condition had no issues, just selling since I decided to give e85 flex tune a go this time hence I'll need something different.

 

Hicas lock bar- $80

Comes with almost new tie rods, only used for less than 10000km, tightens the rear of the car and keep the back end planted. suits r33 and r34

 

Hardrace adjustable caster rod- $150

Adjustable caster rods, rubber version with the rubber replaced by Superpro urethane bushes, keeping it legal whilst getting a sharper steering

 suits r33 and r34 and maybe r32

 

Split dump- $50

Short split dump hks style to suit all rb20 and rb25 cars, heat wrapped, pulled 270rwkw with it on highflow turbo

 

Braided turbo lines (brand new)-$60

Mamba Braided water line x1 and braided oil line x1 to suit rb20 and rb25 standard turbo. Oil line suits standard ball bearing turbo, makes turbo installation and upgrades a walk in the park

 

Located in Sydney, Chatswood. PM if interested, happy to post at buyers expense.

Photos to come soon

 

Link to comment
https://www.sau.com.au/forums/topic/466810-lots-of-parts/
Share on other sites

 

Got brand new Blitz SBC spec S for sale - $350

Brand new still in box, only opened up to take photo

It is the latest model and it is much easier to tune than previous SBCs

Was going to put it on my car but decided to just use the used AVCR I have pulled out of my old car anyway. So here's your opportunity to grab a bargain!

Located in Sydney will post at buyers expenseef89186aeeba921e6f1c9b903a231230.jpg1fe17051130895fd194ea950994dd848.jpgc3dc73bbf51cb7aef6e0d8ceb7f9c692.jpg2b5f28e86746e4ccecd434b9886f0350.jpgef10ebc4b72d393e2e161e1dbc07a6ff.jpg

 

Link to comment
https://www.sau.com.au/forums/topic/466810-lots-of-parts/#findComment-7777659
Share on other sites

Price drop, SAU Special!

 

R34 GTt APEXi power FC with commander and boost controller- $650

Hicas lock bar- $70

Hardrace adjustable caster rod- $120

Split dump- $40

Braided turbo lines (brand new)-$40

 

Link to comment
https://www.sau.com.au/forums/topic/466810-lots-of-parts/#findComment-7777827
Share on other sites

Also got a set of bronze/ gold buddyclub P1 racing 2 wheels for sale- $650

Size: 19x8.5 +38 offset and 19x9.5 +45 offset

Comes with 235 wide tyres on the 8.5 inch wide wheels and 265 wide tyres on the 9.5 inch wide wheels. All tyres have approx 60-70% thread.

The front wheels will not clear gtst and gtt 4 pot calipers due to spoke design, may just clear if you grind the Nissan logo away from the caliper, but since it's advertised on SAU, I will throw in a set of high quality GKtech hubcentric spacers, 15mm billet aluminum with high tensile extended studs and wheel nuts to suit.

Should fit the non turbo r34 with ease however.

Aluminum hub rings also included as part of SAU special.

They'll fit R34 and R33 non GTR cars without guard work, it was fine on my car lowered by 30mm.

Selling because I need to clear up some space in my garage, plus needed funding to finish off work on my car.

Link to comment
https://www.sau.com.au/forums/topic/466810-lots-of-parts/#findComment-7778281
Share on other sites

Still for sale:

Hicas lock bar- $70
Hardrace adjustable caster rod- $120
Split dump pipe- $40
Braided turbo lines (brand new)-$40

Surely there are some skylines out there still with leaky caster rod bushes and HICAS still attached. Good opportunity to upgrade the handling of your car without paying a premium!
The lock bar also comes with new tie rods and dust boot so you won't have to worry about getting new tie rods when you upgrade!

Link to comment
https://www.sau.com.au/forums/topic/466810-lots-of-parts/#findComment-7778430
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Some of them keep working fine. 9 out of 10 of them end up causing an absolute misery bleeding the system and get thrown on the workshop floor in a tantrum and never thought about again because they were never really needed and just added crap to the car that we could have done without. Same-same with HICAS, A-LSD, and various other stupidities that over eager 10x engineers thought we had to have.
    • Not required but appreciated. Super Coppermix Twin even the non-competition model feels like the pedal is noticeably heavier than stock which was pretty well judged IMO. I'll be swapping in the Nismo operating cylinder soon to see how that feels.  Personally I haven't felt anything that justifies replacing the damping loop, at least compared to more modern stuff where the clutch delay valve is actually quite noticeable.
    • He made that comment in my thread - In my case the vents ARE to lower engine heat, when the car is not moving, which is the only scenario I have heat problems with the aircon on, sitting in traffic, on 40C+ days. I can't imagine a scenario that this NC needs any at this point in time. I do not know if it will actually make my cooling when the car is MOVING worse, and I sincerely hope that won't be the case. If it does, well, um, f**k.
    • Nice, thanks. Thats why I was asking, there'd been a fair bit of discussion in the E90 world about vents and where it makes sense to put one (ie, over the filters is not great as that is inline or slightly behind the struts and in higher pressure area). I struggle with air flow and pressures. It sill weirds me out that a radiator in the boot can work. 
    • Neither really Vents, when located in the right place, will lower the engine bay "pressure", as air has a path to escape, thus lowering the engine bay pressure, thus.....improving the efficiency on the coolant stack (read: IC, condenser, radiator) This is why the Blits vented bonnet on my 33 worked so well, the vent was in the front 1/3 of the bonnet, which put it right after the radiator  If the vents are to far back toward the windscreen, which is a high pressure zone, it can actually force air into the engine bay, causing higher pressure and effectively loosing efficiency on the cooling stack, like the fab of raising the rear of the bonnet, which does allow heat to escape, but only when the car isn't moving  There's heaps of cool "fluid dynamics" info out there, but, I'll attach a video of a 'Merican joint that focuses on "Miatas" as I found it when looking into vents for mine, they explain it way better than me  
×
×
  • Create New...