Jump to content
SAU Community

Cant tell difference in brake fluid colour, how much per caliper?

MrStabby
 Share

Recommended Posts

djr81 Grand Master

djr81

Posted
Posted

Usually one bottle (500ml) is enough to do it all.  If you are worried get two bottles, it is cheap enough.

For what its worth my brake fluid comes out looking black as night so if it is still the same colour as what you are putting in it shouldnt be such a drama, surely?

Link to comment
Share on other sites
Duncan Grand Master

Duncan

Posted
Posted

lol that's what I thought too....if it's the same colour you may have been able to leave it a bit longer :)

I generally use half a bottle for the first corner (right rear) then the other half of the bottle for the other 3.  The line to the rear is by far the longest

Link to comment
Share on other sites
MrStabby Grand Master

MrStabby

Posted
  • Author
Posted

Currently has 280 degree fluid and it goes off a bit at the track (pedal gets deeper and heel/toe becomes tricky), so I bleed some off and the pedal is hard again. Comes out completely clean. I'm going to change to Motul RBF600 (triple the price but 310 degrees) because i dont want to have to bleed it at the track.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Duncan's V37.......race car?

      By GTSBoy · Posted

      Much less twat-tastic. CF wheels are too garish for civilised use.
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      From there, as the manual says....assembly is the reverse of disassembly, no tricks worth mentioning Much better (for me)
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      In my case, the standard wheel I had was in good condition but the buttons had more wear, so I swapped them across from the original wheel from the car. The plastic rear cover is held on by 4 tabs, and once the wiring is removed you can get access to 2 screws on each side the hold the buttons in From there I just swapped the wiring over. What was interesting is the standard style wheel is 2.0kg but the carbon fibre one is 50% heavier at 2.9kg. It even has a weight inside the wheel at the top to make up for some sort of imbalance in the design. weird
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stomp on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
×
×
  • Create New...