Jump to content
SAU Community

Recommended Posts

What turbos am i running??

Hi All,

So i am trying to figure out what turbos i have before considering a turbo upgrade for my 1995 R33 GTR. I am not sure whether they are stock or are already upgraded and if so what would be the limits of them as a pair.

both turbos generally look the same although some of the information on the tags are different. The details given in the tag for each turbo are as listed below.

Turbo 1 -  'Honeywell Garrett'

P/N: 707160/5007s

S/N: NG 0122J

 

Turbo 2 - 'Garret Allied Signal'

MH 0412J

14411 - AA403

707160-7

If someone could clarify what exactly i am running, that would be great as i am new to the turbo world lol.

P.s From the research i have done, i think they are GT2860R's... not sure if these are stockies?

Cheers

 

Link to comment
https://www.sau.com.au/forums/topic/467113-what-turbos-am-i-running/
Share on other sites

They can be usually pushed pretty far for a "Stock" (ish) part. They're similar to the stock ceramic turbos but they're made of steel, so, yay.

People can get 300kw from them or thereabouts if wound up. They're useful to max out the rest of the stock GTR equipment, be it fuel pumps, injectors, etc on 98 fuel. As for the boost pressure required do that I'm not entirely sure

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's a huge reason manufacturers are tuning in dead flat torque curves... Make them reliable (and more drive able)
    • What HVAC actuator is under the steering wheel? Do you mean on the RHS of the centre console, immediately to the left of your shin? If so, then yes, it is probably that one, because that is the mode door actuator, and from what I know, it's still a pain in the arse to replace. I don't know about whole dash out, but you certainly have to rip into the centre console section. I don't know if it's covered in the workshop manual, as I haven't spent much time looking at those parts of it. (and by "the workshop manual, I mean the R32 GTR one, which is the most comprehensive one we have, and it should be similar enough between that and later cars to serve as a guide).
    • ...oops. forgot the TCU end...
    • No I got mine from a friend that had fabricated one … but I had to fit it to my setup which was a hks turbo setup. His was a Garrett -7. So one of my turbos was not a flange for one side … then I had a leak in the welds I had to find a weld shut … in the end the setup was decent priced but I spent a lot to get it fitted. A couple companies I checked would make it but you’re talking 7-9k aud with titanium. No joke mine was 6-7k even second hand after I had to fit it in Hong Kong … labour is expensive here. 
    • I'd just like to restate that I don't think anyone here is actually hating I recently sold a car part to a guy who was building a forged auto R34, with MV stall and aiming at ~450kw. I told him that I'm him, from the future and to stop after it explodes once. I told him I knew he won't listen the first time, and that's fine. But if my predictions do come true - Change direction faster than I did. I also said it's probably no coincidence that the dyno plot of a reliable turbo engine starts to look a lot like a N/A motor. :p
×
×
  • Create New...