Jump to content
SAU Community

Recommended Posts

R33 skyline project partout heaps of brand new items

Brand new greddy type r intercooler - $400
Brandnew 50mm radiator-$125
Brand new thermo fans to suit radiator-$175
Brand new gfb electronic boost controller- $250
Brand new waste gate x2-$50 ea
Brand new garrett gt04r turbo with exhaust manifold for r33-$650
R33 gtr dash cluster 15,600km 320km hr-$950
Brand new z7 rims -$600
R33 5 speed gearbox-$750
R33 diff with tru trac centre-$1500
Custom tailshaft-$1200
Rb25 block with 1mm oversize bore with rb26 crank and girdle all balanced (just needs soda blast) -$1000
Adr approved custom bonnet by blitz-$1200
R33 skyline shell with full paint job bmw sepang bronze with a ghost flake with a full race suspension arms and neomax silvers coilovers never had engine in since fitted.-$3000
Brand new stage 3 head with brand new internals and a 350cfm port and polish- $2700
Surge tank $100
Forward racing plennum (greddy style) with 100mm throttle body, 14mm fuel rail (tomei) 1000cc injector dynamic injectors and fuel pressure regulator -$1200
Tail lights led- $100
Headlights -125
Front bumper-$250
Rear bumper-$250
Tomei cam gears-$175
Tomei timing belt and pulleys- $30
Water pump-$75
Oil pump n1- $125
Tomei poncams 272 9.5 lift- $450
Gtr boot and spoiler -$200

30 row oil cooler- $100

Pretty sure i have missed stuff but if i remember more i will update

IMG_0262.JPG

IMG_0263.JPG

IMG_0264.JPG

IMG_0265.JPG

IMG_0266.JPG

IMG_0267.JPG

IMG_0268.JPG

IMG_0269.JPG

IMG_0270.JPG

IMG_0271.JPG

IMG_0272.JPG

IMG_0273.JPG

IMG_0274.JPG

IMG_0275.JPG

IMG_0187.PNG

IMG_0188.PNG

IMG_0189.PNG

IMG_0190.PNG

IMG_0191.PNG

IMG_0192.PNG

IMG_0193.PNG

IMG_0194.PNG

IMG_0196.PNG

IMG_0197.PNG

IMG_0198.PNG

IMG_0199.PNG

1 waste gate left
Turbo and manifold sold
R33 5 speed gearbox sold
Cold side (plennum injectors etc) sold
Tail lights sold
Tomei cam gears sold
Tomei pon cams sold
Gtr boot and spoiler sold

Stage 3 head price drop $1800
Intercooler price drop $350
Rb 25 block oversize comes with forged pistons and conrods price drop 500
Adr approved bonnet price drop $1000

Ok. 

could be interested in it, what centre has been used with it and who installed it? 

 

To be honest I didnt even know you could fit a true track into a r200 so that's good news. 

 

Any pics would be good bud.  Thanks. 

  • 2 weeks later...
  • 2 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For sure the later RB26 variants had a different setup (6 cam voltage sender?), but the RB25DE/DET share the same ECU pinout/PCB footprint, and at the ECU plug it ends up being 'throttle sensor in' & 'throttle sensor out' (to A/T TCU) ...you stick a multimeter on these pins and you'll find them directly connected (0 ohms) ; I had an pair of Nissan ECUs on the bench long ago, and I noticed this throttle sensor in/out link, actually linked to an op-amp ...which was unpopulated on the NA board, but present on the T board and I went 'ah-ha!' in some moment of clarity... ...it wouldn't surprise me if they changed strategy here though (in the software and actual monitoring of this signal), because they did with other stuff (A/T signals).. and 0.45v as a trigger point makes sense, as that's what the external TCU units expect at idle ; kudos, thanks for that insight...I suppose it boils down to whether or not Consult can display real time data of that signal's voltage... ...in any event, it presents the same target...ie; rotate TPS unit to achieve 0.45v to suit both ECU&TCU, and where do you goto from there? Just disconnect TPSwitch connector and/or that plus TPSensor connector....or do you go for the throat and disconnect IACV solenoid and see if it still stalls? (probably throws a recoverable fault code and goes for default idle strategy?)...
    • I’m also conscious that e85 is slowly being phased out. Not all United’s have them anymore. Can’t take the risk of being low on petrol and assuming the servo will have it. 
    • MR HAMMER has said his piece. Painted up to avoid Rusty Rusty. Actually lines up well. (i.e it lines up the same as the unmolested GTR guard). Turns out the GTR Strut brace does foul on the bonnet vents ever so slightly. May need a little bendy bendy if intended to keep using with a strut brace. So spacing it out to clear the FAST102 is not an option. Annoyingly, the bonnet vents also foul on the heater lines running over the engine. Given this engine does not EVER require a heater, a delete loop is going to be used. Don't worry, the defogger uses the AC. The heater is basically "Do not use the aircon and turn the fan on". It will still be effective, I promise.... once I get the system regassed... Will have to revisit with unvented bonnet I suppose, and suitable strut brace. There's plans to do this and other things tonight and bleed brakes (there was a weep) and put the bumper back on, and take Good Friday morning - Because troubleshooting on the side of the road limping it home at midnight tonight is ... not very smart.
    • Thank you all for you assistance. I contacted Nistune regarding the support for the RB20DE along with my ECU Code (23710-10U00). They do have a map for it and added the RB20DE as a purchasable option now as well. They also added Malta as a Billing and Delivery options as this was missing. I was honestly amazed at their quick response and action, it took less than 24 hours. I also looked again at direct fit options for injectors, just in case I were to replace them. DeatschWerks seem to use a Bosch EV14 base and makes ones that fit mine at 440cc lowest, but also have 550cc at the same price. I tried looking for other direct fit options and managed to find one (also Bosch EV14 based) which includes a plug and play adapter on ebay. Did a small test with a Noid Light on the troubled injectors and all seems good, so they are pulsing properly electrically. One weird part is that they are missing on the same two cylinders as before I got the injectors cleaned. Mechanic also found this weird as he did not label the injectors and it is unlikely to have the faulty injectors be installed in the same cylinders.  
×
×
  • Create New...