Jump to content
SAU Community

Recommended Posts

I had a Celica back in the day, I'm not anti FWD or hatch/liftback, I just don't see something like that as being a special weekend toy for a guy in his 30s. 

You're talking about using it as a cheap daily, which makes much more sense. 

@ActionDan have you considered an older RS4 or an E46 or E92 M3? I love those things, but have no idea on reliability. They're not new, but they are still pretty awesome.

On 10/31/2016 at 0:55 PM, ActionDan said:

I dunno, I asked a few Qs in the 35 section and got crickets. Have they all moved to FB?

Might be worth joining one of the 35 GTR pages and asking a few questions. 

 

From memory there is a specific 35 owners page in Aus and there are a few 35 owners in the GTROC's FB page (mostly from the UK). 

 

I was doing some Euro vs Jap research last week (bcoz boredom) and found nothing that even resembles an argument the say Euro is reliable.

I'll just say that not ALL euro cars have an issue, but the sheer number and importance of the malfunctions are too large to ignore.

I was using this website, which was handy. http://australiancar.reviews/reviews.php#!content=recalls

Yes, a lot of reviews and forum posts are negatively skewed because everyone has the energy to complain but few praise. Just compare the types of recalls issued for common Euro models and then compare to common jap models. Its often chalk and cheese.

Person at work has a 2015 Mini Cooper S. The new mini has been around for quite a while now. Each series has had a different motor, usually shared with a 1 series BMW. The second series had an issue with timing chains letting go, so now its on the maintenance list to be replaced every 30,000kms. Anyway, latest Mini's had incorrect main bearing tolerances and a huuuuuge amount of mini's got new motors. This particular owner was told it would need a new engine when it went in for a service at 13,000kms. When replacing that many motors, no doubt BMW was using the iPhone philosophy of repair the broken and then use them as "brand new" replacements.

When my ex was looking at getting a Mk4 Golf GT Sport, I spent a lot of time researching because they had massive problems with the injectors. VW did everything in their power to avoid making an official re-call. You go to the leading VW OZ forums and there are dozens of pages of owners reporting their cars getting done, some being out of pocket $1500 an injector. 

Then theres the audi's firmware updates that get applied when getting serviced and causing all sorts of problems.

Mercedes would be my bet for Euro. From what I've experienced and people I know who work on them have said their diagnostics and design are really good. And yeah, there are a lot of daily-driven 400kw audi's floating around, which is impressive.

 

Anyway, compare that to all the lexus recalls, and in typical Lexus fashion, most of them are just complaints from nit-picky owners. (the LS series is basically designed from customer feedback every series. Which is great, but it also means that almost every production month LS is different, even if theyre the same series. Toyota part numbers are a bitch on the luxury cars). Common problems include: annoying accessory belt noise, rear view mirror discolouration, wind noise from door mirror, an in-line filter added to the aux port to stop interference noise.... :| 

  • Like 1

I would take an LS600hL over any euro luxury car. any of them. and not just because I like VIP.

I've always wondered if some Euro do this:

 

 

Lexus has been doing it since the 90's. so bawler.

  • Like 1

lol easily amused I see ;)

I did consider something leaning more towards luxury than performance, but I know stuff all about cars in that space. Plus they're generally big 4 door things and ideally I just wanted a 2 door. 

I dunno i wouldn't bother going a half ass euro if i did.

A good friend of mine sold her 2013 M3 like 2 months ago for 80k and it had f**k all KM's on it. Was a bit of fun. 

Apparently the 2013 M3 wasn't good enough. Got a 2016 M4.

2 hours ago, ActionDan said:

Daily = work car(free). 

Think I will keep the 34, put a nicer clutch in it and maybe some Cams and just sit back and see what what the R35 market does. 

Getting some well built & matched coilovers. Will certainly change your perception of comfort in the 34. I have Tein Super Street's (Aussie modified versions) set 5 clicks from full soft. They are only a poofteenths harsher than my stock 04 Accord Euro on the street. Obviously prob not the best for track duties, but my car is 99% on the street.

I previously had an Evo 7 with BC BR's, and it was still bone shaking on 8/6 kg spring rates.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Gday, Due to not finding much up to date info on this topic I thought I'd make a thread to get peoples latest opinions/recommendations. Background info -  I've got a S1.5 R33 GTST as a fun project car, mainly for street use and occasional drag strip, apart from all the cosmetic things I'll be doing a full rebuild of the engine with forged internals. Since it'll be getting new cams (kelford) and springs to match I thought I might as well get new lifters and valves while I'm at it, the dash says 160k KMs but the engine seems pretty tired, compression measures about 130psi across all cylinders so I'd like to freshen everything up. This is where I'm tempted to just fork out the extra and go solid lifters while it's all apart, aiming for 400-450kw atw with a flex tune. Assuming all supporting mods (oiling, fuel and all bolt ons) with a lightly ported head and turbo to match (yet to make a decision possibly gtx3582r or similar from Hypergear) I've seen the Tomei kits with just the buckets getting around, Supertech sells most things - Supertech High Performance Cam Followers | Trusted Racing Cam Followers Questions -  Has anyone found the Hydraulic lifters to limit them at this power level? Is it usually found that you can just clean the stock lifters and find they work fine?  Does going solid lifters save any headaches/issues with hydraulic lifters in the future? Any recommendations on other things that will need to be replaced, I know I'll need to get the solid profile cams but can you use the same type of valves and springs/retainers and is it recommended to change the guides and stem seals?    Summary -  Basically looking for pros/cons and wanna know if I'll actually need the extra RPMs from solid lifters or it'll just be bragging rights to say it ReVs OvEr 8000 Cheers
    • Ha ha ha, this stuff they had was installing Toshiba PLCs that were made some time in the 1990s, and they were replacing GEM80 PLCs. To let those two talk (staged upgrade along a ~1.2km long building that was split into 4 sections), was a bunch of WinXP machines running Java gateways... There was no way to put something like ProfiSafe in... Most of the HMI machines were WinXP, with Java program, with a custom button board emulating a keyboard... About the only buttons in the operator stations that went direct to the PLCs was the eStop. There was some interesting design stuff in that place...
    • Stock bypass valves are good for plenty of boost.
    • Check for fuel flow out of the outlet end of the rail. Check for spark. Try to start with aerostart (or pressure can brake cleaner or similar solvent in a car) prayed in through TB. If you have fuel and you have spark and it will fire on substitute fuel, then seriously suspect that E85 sitting for ages in your fuel system has destroyed something and put it in your injectors.
    • Nissan stock oil pressure is typically about 1 bar at 1000 rpm plus about 1 bar per thousand revs on top.
×
×
  • Create New...