2006/7 Nissan Skyline PV36 Sedan Hub/Wheel Bearing

[ahxching]

2006/7 Nissan Skyline PV36 Sedan Hub/Wheel Bearing

Needing to replace my hub bearing as the noise is really getting to me...

Does anyone have the part number for the front hub bearing?

Does anyone have a price or know where to buy it from, other than Nissan?

[sonicii]

40202EG06C

http://nissan.epcdata.ru/skyline/pv36/7257-vq35hr/trans/400/40202M/

https://www.amayama.com/en/search?q=40202EG06C

http://www.ebay.com.au/itm/FRONT-WHEEL-HUB-NISSAN-SKYLINE-V36-2006-40202-EG36C-/181806929756?hash=item2a5489975c:g:CM4AAOSwMmBVqnc1

Personally, I would go genuine, but there as above, there are aftermarket options available.

[ahxching]

Thanks heaps for the info.

I might just give the ebay one a gamble as there is a 10% discount happening right now, $325 ebay or $832 for oem - big difference, ill take the gamble

[junkie]

may be worth checking the tyres before replacing the bearings

my s14 had worn bearing sound from the back, turned out to be dried out crappy old tyres, the noise is totally gone now with a fresh set of rubber

[ahxching]

38 minutes ago, junkie said:

may be worth checking the tyres before replacing the bearings

my s14 had worn bearing sound from the back, turned out to be dried out crappy old tyres, the noise is totally gone now with a fresh set of rubber

Yeh I changed rims/tyres with a friend, his rim and tyres had no faults when it was on his car.

After putting it onto my car, still made the sound. 

It would have been such an easier fix if it were the tyres, I did at first think it was the tyre cos I do have some cheapy chinese ones which are 3 years old but it wasn't the case...

[ahxching]

Purchased 2 hubs from the ebay link from above.

Packaging was really well put together, but one of the hub had a crack on the inner hub section, sent it back and got a refund.

Also with installing the hub rings, had to dremel the opening for the ABS adapter as the opening was smaller than the OEM ones.

Car runs smoothly now, decided to just run one side with new and one with the old as it is working fine for now.