Jump to content
SAU Community

Recommended Posts

I drove a Abarth Fiat 124 Spider

So, my colleague at work this week had a demo Abarth Fiat 124 Spider for the week. Number 1 of 100, I took it for a little spin this morning.

It's hard to get a proper feel for these cars I get to drive as most of the time I am limited to just driving around Pyrmont and can't give them a proper test.

I also wasn't able to get any photos this time. :(

Thanks to NetCarShow.com for the pics.

large.Fiat-124_Spider_Abarth-2017-1280-0

The first thing I can tell you is that it wasn't made for 6'5" 110kg people. I almost had to shoe-horn myself into the driver's seat and then my leg was so significantly wedged in under the dash that I couldn't stop thinking about how much it hurt. It also really hindered my ability to use the clutch. 

So, it was immediately clear to me that even if I wanted to buy one, I simply couldn't. I did put the roof up to see how much of my head would need removing, but alas, this was fine with a good finger's width between my hair and the roof. 

The interior was very nice, but I did feel like I was in a new Mazda3. The dials and buttons and materials were all top notch, but not Italian. The indicator was also on the right, not left like a proper European car. But, that's a bit of a nit-pick from a European car lover.

large.Fiat-124_Spider_Abarth-2017-1280-0

Remembering that this is just an MX5 in a new jacket, I tried hard to see it as an Italian roadster. That was hard as the interior didn't have any Italian feel to it, besides the red stitching on the dash and the red 'ABARTH' branded seats (which would be really nice for anybody who could fit in them.)

I didn't know what engine was in it before I drove it and assumed it was one of Mazda's 1.5 or 2.0 offerings. I was a little underwhelmed with the performance and found very little down low and it was quickly out of puff up top. Meaning, it had a nice mid range and if you can keep it in that range with the 6 speed it would be awesome. It sounded quite tinny though with the odd bauble here and there.

When I gave it back and had a read about it, I found out that it is actually a turbo 1.4. That's very impressive because it definitely behaved like a bigger engine and the lack of torque made more sense to me after that. But, I do not think that the engine fits the car. It needs more, it needs a bigger range, it needs more top end and i also think that 6 cogs for a 1.4 are a little much. 

Note that mine was obviously a right hand drive. :)

large.Fiat-124_Spider_Abarth-2017-1280-1

Handling was great. Turn in felt a little like a Honda Integra Type R like it was a capable front-wheel-drive bordering on understeer. As it is a rear wheel drive, I didn't want to push and see what happened so I kept it sane. I was in Pyrmont, remember. 

I must admit that this little car got as much attention as the Porsche GT4 I drove the other week.

All in all, very fun. I can't see how anybody could survive with this as their daily. The complete lack of interior storage, space and back seats would render this car entirely useless to most full-sized people.

Would you pick this over an MX5?

Some comparison;

Mazda MX5 1.5L: From $42k, 96kw / 150nm
Mazda MX5 2.0L: From $44k, 118 / 200nm
Fiat Spider: From $44k, 125kw / 250nm, 0-100 6.8s.

More pics in the Album.

 

  • Like 3
Link to comment
https://www.sau.com.au/forums/topic/467952-i-drove-a-abarth-fiat-124-spider/
Share on other sites

I love the little Fiat 500, but this... no. MX5 all the way for me! 

So you said you were quite tall (me too), where were your eyes? I find I tend to be looking at the top of the windscreen...

 

1 minute ago, Steve85 said:

I love the little Fiat 500, but this... no. MX5 all the way for me! 

So you said you were quite tall (me too), where were your eyes? I find I tend to be looking at the top of the windscreen...

 

The rearview mirror and top of the windscreen were right in the middle of my gaze. I had to drop my head a little when driving or A LOT when turning left (as the mirror took my entire view).

Quote

The rearview mirror and top of the windscreen were right in the middle of my gaze. I had to drop my head a little when driving or A LOT when turning left (as the mirror took my entire view).

Haha! THIS. All the time! 

Sometimes after more than 30 minutes, my neck and back get kinda sore. That said, I bought a Ford Falcon (BA) and it doesn't have much headroom. Thanks a lot sunroof!

@admS15, love those little things! Awesome cars. I can't imagine having a bad time in a car like that. It just looks like whenever you jump in it, the car would be happy to see you.

55 minutes ago, Steve85 said:

@admS15, love those little things! Awesome cars. I can't imagine having a bad time in a car like that. It just looks like whenever you jump in it, the car would be happy to see you.

If it had a tail, it'd be wagging.

  • Like 1

They look way, way, way, way better in person than they do in photos too. And of course sound nuts with a decent exhaust.


Just add a bit of boost and job done. Maybe coils blablabla.

As for ftting, seriously never understood that. I am 187cm, and I fit perfectly fine in a NB which is supposedly the worst to fit in. Can only attribute it to people not knowing how to adjust a seat or I have abnormally long legs. My 198cm friend fits in the same MX5 as well. Just have to lean the sit back a bit and boom, feels more sporty to boot.

@Kinkstaah, i can tell you, i'm 2m tall and I like to sit bolt upright in a car. I absolutely cannot stand to be leaning back VL style (or whatever we're calling it now).

In most cars I find the seat goes back far enough, but I run out of head room. So maybe my torso is abnormally long? lol

There are obviously some scenarios (like above) where combination of being super tall and super upright will cause an issue. One probably fixed with a custom seat. There's just a LOT of people out there who are... 6ft or thereabouts saying "THERES JUST NO WAY I CAN FIT IN, ITS LITERALLY IMPOSSIBLE TO DO!!!!!" which isn't really true, one should probably try and sit in one of them first.

I don't consider myself tall, but I get a ton of people who are literally amazed I can fit in one, results in me scratching my head a lot!

would take this over MX5. Japanese build quality but with euro re-sale! how could you say no? 

but serious, im not one that wants a turbo on anything, but i'd want this because MX5 dont got no turbo. theyre both good looking cars (so rare for this era)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • It only looks tidy, as most of the stuff that was on the whole back wall, is now in the trailer to go to the tip, or has been shoved in my 2.2x2.4m "Spare parts room", and now I can't get to anything in there Ha ha ha I could definitely do with a bit more space, but I'd just end up with your problems I'm going to enclose the car port beside the garage, and move a lot of stuff into it I think. OR... It will be setup as a fabrication area, and the main garage will have parts storage in it. I'm not sure yet... Need some pictures of that big shed you've got with the bikes and Skyline in
    • No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
×
×
  • Create New...