Jump to content
SAU Community

Recommended Posts

Help with buying a V35

Hey Guys! So like many i am new to these cars. I have read many of threads on the forums to inform me of the V35 Skylines. I have currently found a 2003 V35 with 83,000kms for $10,000. The car unfortunately has no paperwork. It has a service history of the last 20,000kms the owner has owned the car. Would you guys recommend looking at the car or ruling it out completely due to having no books or service history.

Edited by james1999
Link to comment
https://www.sau.com.au/forums/topic/468017-help-with-buying-a-v35/
Share on other sites

My car was i ported with 78,000km just over 2 years ago. I purchased directly from an importer who was able to provide me with the de-registration papers to verify the mileage. This was important,  beacuse in Japan they register the car every two years and the km are recorded each time, so you can tell if the mileage at the time of deregistration is consistant with the last time it was registered. I was lucky as well that a workmate had a contact  in the import industry, who was based in Japan, who verified the car had never been in an accident.

Unfortunately  log books are very rare on imports and I dont even have one on mine. I had a sticker on the intake advising the last service was done at 77k kms. I didnt believe this sticker and serviced the engine, transmission and diff. Unfortunately I was wrong, as all the drained fluids were brand new, and I could have saved myself several hundred dollars on servicing costs. It could be that I purchased one of the only honest cars from Japan...

But to be fair, in the first 12 months, I had to replace the air con and power  steering belts, front  and rear brake rotors and pads. In the last 12 months I have replaced the diff bush, lower control arm bushes and swaybar end links. The car came with Tein coilovers- the front split a seal and cost me 800 to fix around 18 months ago. My rears just had the same thing happen, and I am about to send them to Fulcrum in QLDto be repaired. I still need ro replace the radial bushes, which will cost nearly $600 (as you need a 4 wheel alignment as well).

My point is that you are buying a relatively old car, and it is at the age where things start to fail. If the previous owner has fixed a lot of these issues, then go for it. If not, get an independant inspection done. Other common issues are cam sensor failure, faulty airbag codes, worn wheel bearings and power window  modules. If the mileage seems to good to be true, check for worn floor mats, steering wheels, kick plated and door handles etc as telltail signs.

 

Truth  be told, every time you buy an import, you are taking a punt. They are fantastic cars,  very underrated and very reliable. I have pwned other imports, including an R33 and R34 turbo skyline, and V35's are in a league of their own. My advice is to take your time, do your research, and make sure you buy the right car- dont just shop for price. Hope this helps.

  • Like 2
11 hours ago, camr33 said:

My car was i ported with 78,000km just over 2 years ago. I purchased directly from an importer who was able to provide me with the de-registration papers to verify the mileage. This was important,  beacuse in Japan they register the car every two years and the km are recorded each time, so you can tell if the mileage at the time of deregistration is consistant with the last time it was registered. I was lucky as well that a workmate had a contact  in the import industry, who was based in Japan, who verified the car had never been in an accident.

Unfortunately  log books are very rare on imports and I dont even have one on mine. I had a sticker on the intake advising the last service was done at 77k kms. I didnt believe this sticker and serviced the engine, transmission and diff. Unfortunately I was wrong, as all the drained fluids were brand new, and I could have saved myself several hundred dollars on servicing costs. It could be that I purchased one of the only honest cars from Japan...

But to be fair, in the first 12 months, I had to replace the air con and power  steering belts, front  and rear brake rotors and pads. In the last 12 months I have replaced the diff bush, lower control arm bushes and swaybar end links. The car came with Tein coilovers- the front split a seal and cost me 800 to fix around 18 months ago. My rears just had the same thing happen, and I am about to send them to Fulcrum in QLDto be repaired. I still need ro replace the radial bushes, which will cost nearly $600 (as you need a 4 wheel alignment as well).

My point is that you are buying a relatively old car, and it is at the age where things start to fail. If the previous owner has fixed a lot of these issues, then go for it. If not, get an independant inspection done. Other common issues are cam sensor failure, faulty airbag codes, worn wheel bearings and power window  modules. If the mileage seems to good to be true, check for worn floor mats, steering wheels, kick plated and door handles etc as telltail signs.

 

Truth  be told, every time you buy an import, you are taking a punt. They are fantastic cars,  very underrated and very reliable. I have pwned other imports, including an R33 and R34 turbo skyline, and V35's are in a league of their own. My advice is to take your time, do your research, and make sure you buy the right car- dont just shop for price. Hope this helps.

Thanks for that! I agree. i will definitely view a number of different cars and wait until something good comes up. Cheers mate! 

If you are concerned about its 'pre import' history, order a report from one of the companies that can pull the auction records from Japan, that way you can get an idea if it has had the odo wound back, was a repaired write of, etc.  eg http://www.japaneseodometercheck.com/

If you are still interested, get it checked by a mechanic familiar with these cars or 350Zs, tell them it has no service log books and you just want it checked accordingly (compression test, etc).

1 hour ago, sonicii said:

If you are concerned about its 'pre import' history, order a report from one of the companies that can pull the auction records from Japan, that way you can get an idea if it has had the odo wound back, was a repaired write of, etc.  eg http://www.japaneseodometercheck.com/

If you are still interested, get it checked by a mechanic familiar with these cars or 350Zs, tell them it has no service log books and you just want it checked accordingly (compression test, etc).

Cheers! I will definitely follow these steps! 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey mate give Autotechnica a go, I recently got some Comfort PUs and rails from them, they're comfy and look great highly recommended! https://www.autotecnica.com.au/part-finder/nissan/skyline/r32/
    • Honestly, for a daily I would gladly rock a Camry. The more disposable the better. People drive horribly out here and road conditions are awful.
    • Verify it's going into each of the 4 gears in normal acceleration, make sure the torque converter locks up over ~65-70 kph or so at low throttle opening. If you ease into the throttle at those speeds eventually you should get a "gear" between 3rd unlocked and 4th locked. It should downshift eventually if you floor it at 65 kph too. Get some Matic D ATF and drain the pan, check for signs of sadness in fluid and drain plug magnet. Top off to the correct level afterwards. If the transmission is worth saving you can drop the pan on a second drain and change the filter while you're at it. These are not complicated transmissions, at least compared to modern stuff.
    • A seat I find stupidly comfortable to sit in is the one in a friend's Merc Race Car. It even has the huge wings that wrap around your head. Best ever. Only issue is climbing through his scaffolding he put up in the doorway of the car... Ha ha ha. I sat in that seat for a couple of hours doing wiring. Another stupid comfortable seat I find, especially if my back is aching, is my OMP fixed back bucket seat too. I'll just sit on it when I'm exhausted in the garage sometimes to relax!
    • I just got off the phone with Dean from Vosta in Brisbane. They are the ones that do the replica seats and they have a shop full of seats for my to try out. Lovely guy.  I haven't decided whether to go genuine or replicas, I'm leaning towards Genuine at this point but who knows.  Also thinking the STRADIAs are the way to go VS the GIAS since they have a lower hip edge and would be easier to get into. Don't really like the idea of arm rests on the models to the right of this diagram either, maybe they can be removed?
×
×
  • Create New...