Jump to content
SAU Community

Recommended Posts

SAUNSW Texikhana - Rd2 club championship

EVENT: SAU NSW Championship Round 2 Texikhana

LOCATION: Nirimba Airfield / TAFE / Skidpan - same place as last time (yeah, it's got a few names)

LOCATION MAP: https://goo.gl/maps/h8GrX

DATE: Sunday April 30th

What is it: Motorkhana courses marked with orange things that we'd kindly appreciate if you drove around rather than over.

Entry Cost:

To Enter please click the link. Entry is through are SAUNSW store page. 

https://store5191044.ecwid.com/#!/SAUNSW-texikhana-Rd-2-club-championship/p/77640896/category=10151434

SAUNSW members: $50 Entry fee

Entry cost Non SAUNSW members: $65 Entry fee

(If you plan to enter more than 1 or more events with us it pays to be a funded member)



Spectators: Free to watch

Passengers: $10 which is cheap compared to other clubs and events, (SUPPORTS OUR CLUB!!!) , MUST sign on, MUST wear wrist to neck/ankle clothing with enclosed shoes and approved helmet, same as drivers.

Courses: Released on the day at sign on

First timers: Don't be shy, you'll love it.

Those of you that have been to one of these before will agree, this is the best money you can spend as far as driving time for an event. The event will be run after run until 3.30pm, and considering most runs are under 1 minute AND that we're kicking off at 9am, that's a lot of runs :thumbsup:

This is a safe event where you only go as hard as you want to, there's no pressure, one car on a course at a time. Perfect for beginners to have a first try at driving their pride and joy off the streets.

Motorkhana is a low cost way to get involved in motorsport. You can get your first taste of motor sport in your standard road car, but this discipline also caters to the most skilled and experienced of drivers in highly modified or purpose built Motorkhana specials.

The competition is designed to test the acceleration, braking and manoeuvrability of a vehicle and the skill and judgement of the crew members.

A motorkhana may be conducted on a sealed or unsealed surface and involves manoeuvring through tight and twisty tests marked by flags.

Cars will be started individually and there will be one car on course at one time.

With that said, there's usually some friendly competition between mates, which is great to watch :D

SAUNSW Members Championship:

This Event will be the 2nd Round of a 4 Round Championship.

The Championship contains 4 rounds
•March 4th, Trackday at Wakefield Park
•April 30th, Texikhana at Nirimba
•June 12th, Trackday at GP circuit, SMSP
•October 2016, Drags at WSID.(Date to be confirmed)

(Hill climb event still being organised) 

For further details on the club championship check out the championship thread in the members section. 


Timing for the day:

Scrutineering/sign on starts - 7.00am

Scrutineering/sign on ends - 8.30am (don't show up at 8.25am, come with plenty of time to spare)

Drivers brief - 8.40am (mandatory attendance all drivers)

Runs start - 9.00am

Lunch approx - 12.30pm depending on how the day is going (One hour)

Runs stop - 3.30pm (Approx)

Gates close - 5.00pm

Entrants please note:

-You do not need to own a Skyline, all makes and models are welcome to enter.

-All entrants under 18 years old must have parental permission.

-Passengers must be 15 and over.

-Drivers must be 17 and over.

-All entered cars must arrive in time for and pass scrutineering, no exceptions.

-All drivers must be licensed (AASA or CAMS) and show valid licence and expiry date at sign on.

-All cars must have an insurance approved fire extinguisher secured within drivers reach.

-Yes you can join SAUNSW on the day (allow an extra 5mins at sign on)

-There is no EFTPOS/Credit Card machine on site, so bring cash and we will have change there for you. If you can bring close to the right amount, that would be helpful.

Regarding your motorsport licence:

CAMS or AASA club license is required - Day license will be available for purchase for $25 (Bring cash!)


One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general.

When attending one of Skylines Australia NSW events please try to:

* Be aware of surrounding environment and act accordingly.
* Drive courteously on the state’s roads as a true enthusiast should.
* Understand how important it is to maintain the good name of SAUNSW and thus, treat others accordingly.
* Any misbehaviour will not be tolerated and you will be asked to leave.

*** Details may change. check back regularly.
*** On the day please bring your Motorsport license as we need to visually see it, We will have you fill out an entry form and waiver form on the day.

SUPP REGS - ENTRY FORM - DISCLAIMER.pdf

Entry list.

1.

2. RiseofBrutality (M)

3. Jebud (M) (C)

4. Deka (M)

5. Hy_rpm (NM)

6. Gavinchua (M) (C)

7. Husky33 (M) (C)

8. Santos (NM) (C)

9. Daley (NM) (C)

10. Brodiek01 (M) (C)

11.

12.

13.

14.

15.

16.

17. Ianjb (M)

18.

19.

20.

23. deongster (M) (C)

133. evil_weevil (M) (C)

(M)=Member

(NM)=Non member

(C)=Confirmed payment

 

Edited by crashdown
Entry list updated
  • 4 weeks later...
  • 1 month later...
11 hours ago, benm said:

What is the total number of entrants available? 

We normally aim for the 30 entrants mark. That's seems to be a good number to allow everyone 3 to 4 turns through each of the maps.

1 hour ago, evil_weevil said:

wmany spots filled?

I'm yet to pay...! oops...just renewed my CAMS licence so that's a start...

We still have many spots left. Take up has been slow, but we usually start seeing entries rolling in a few weeks before

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Don't do it if your gearbox box has already having syncro issues. The short hifter will put a greater load on them. If you must I remember Nismo did a shorter shifter, with the top part being physically shorter and the part that went into the gearbox was the same as stock. In saying that I've had a C's short shifter (I think) in mine for many years, which was given to me as the previous owner was not sympathetic to the gearbox. Thus forwarned I was careful and had to modify my normal changing style. You have to be super accurate with your clutch and shifts
    • Well, after a week of daily driving and having to crawl out between the wheel and the side intrusion bars. I got myself a quick release setup. I went with an NRG short hub and Quick Release with some cute heart cutouts on the pull tabs. Nice and matchy matchy with the rest of the interior accents I have going on.  The only downside is the total stack height even with the short adapter is longer than the old HKB boss kit. Luckily I had some adjustment left on the column so move the wheel away.
    • stock shifter with new bushes, springs and cup will improve it. Gktech do all the bits. The opinion as the years have gone on is the redline is not great in old gearboxes.
    • Hi all   what short shifter do you use on your skykine r34?   my synchronous does have a problem and i was getting huge delay and grinding sound between 2nd and 3rd, did put shockproof red heavy stuff and it is great now/ no issues   would in your view short shifter screw this up?   people seems to suggest/ use cube short shifter and there is standard and premium. Seen review of premium as much better and less play. Thoughts?
    • Yeah, there's a bit of a density and friability difference between pebbles and any of those other things. Silicone will definitely float in oil and so will be mobile enough to move around. Although, again, if it is upstream of the filter it really shouldn't go any further. I would only ever worry about silicone when it is in places downstream of the filter. Upstream of the pickup is a whole 'nother matter. We've all seen what that does. I have seen the most abominable crap settled out in industrial gearboxes, trunnion lube systems and the like, without any sign that any of it has touched anything in the machine. Just chilling in the bottom, waiting for the inevitable operator error that causes the whole machine to need to be dismantled for repairs.
×
×
  • Create New...