R32 GTST boost tee

[Jalfr32]

R32 GTST boost tee

Installing R32 boost tee

Hey so I'm trying to install my boost tee. All tutorials online show cars with the solenoid or external wastegate. The 32 GTST doesnt seem to come with a solenoid so that method doesn't work, now people say to connect tee to the line from turbo compressor to wastegate but there is no line from turbo compressor to wastegate. Only line is from wastegate to intercooler piping ( as seen in image ). Would this one be okay to use?

[89CAL]

Really?

The nipple is usually on the compressor outlet and the nipple your asking about is literally 5cm away from where the instructions are telling you it needs to go

Yes it is fine

[Jalfr32]

Yeah did it and now boost doesn't stop rising almost took it to 20psi by accident. Also I feel no turbo but it's definitely spooling, like the engines getting none of the boost. Maybe a faulty tee. Who knowwwwwsss

[GTSBoy]

Your statement cannot make sense.  20 psi into an RB20 and you will feel it.  You cannot have 20 psi and not feel it going faster than it used to.  Well, for a minute, before the turbine explodes.

[Jalfr32]

Apparently it's because it's the black tee instead of the traditional blue one. People reckon there's a difference.

[GTSBoy]

I call bullshit.

[admS15]

Apparently it's because it's the black tee instead of the traditional blue one. People reckon there's a difference.

Should of got a red one. Everyone knows red is faster[emoji6]

[89CAL]

If your boost gauge is connected to the intake manifold than the engine is getting the boost.

Is the boost tee the right way around? They are a very simple design, dont usually play up unless they are setup wrong