Jump to content
SAU Community

Recommended Posts

Nitto nt01
Nitto nt01

Hi all I have a question to ask. Is nitto nt01 tyres street legal in NSW?

And if I have them on will RMS pass my vehicle for inspection?

Please can anyone advice who has gone through this.

Thanks

Link to comment
Share on other sites

They are road (barely!) legal when brand new but will very quickly get down to the wear indicators on the tread.

If they are brand new you shouldn't get much grief over them but if they do raise eyebrows then expect to have the rest of the car gone over with a fine tooth comb...

Nitto "strongly recommends" that these are a dry weather competition tyre only, they are street legal in the sense that they are designed for being able to drive to the track without having to swap wheels / rubber but can be like iceskates in the wet. If you are worried about the inspection then a cheap set of Bridgestone RE003's (they are on sale - 4 for the price of 3 currently) or similar would be a great idea and you can get the NT01's swapped back on when you want the better grip after the inspection or when heading to the track.

Edited by baron_von_bootsector
Link to comment
Share on other sites

Most cops will try and defect you, I had to explain to one these are race tyres and the tread was (at the time) still above the 1st indicator.
Note, with NT01 you can drive them past the tread, there's a 2nd indicator in the form of a circular indent.




They are road (barely!) legal when brand new but will very quickly get down to the wear indicators on the tread.

If they are brand new you shouldn't get much grief over them but if they do raise eyebrows then expect to have the rest of the car gone over with a fine tooth comb...

Nitto "strongly recommends" that these are a dry weather competition tyre only, they are street legal in the sense that they are designed for being able to drive to the track without having to swap wheels / rubber but can be like iceskates in the wet. If you are worried about the inspection then a cheap set of Bridgestone RE003's (they are on sale - 4 for the price of 3 currently) or similar would be a great idea and you can get the NT01's swapped back on when you want the better grip after the inspection or when heading to the track.



How many track days do you get out of them?
Link to comment
Share on other sites

On ‎16‎/‎01‎/‎2017 at 6:12 AM, baron_von_bootsector said:

They are road (barely!) legal when brand new but will very quickly get down to the wear indicators on the tread.

If they are brand new you shouldn't get much grief over them but if they do raise eyebrows then expect to have the rest of the car gone over with a fine tooth comb...

Nitto "strongly recommends" that these are a dry weather competition tyre only, they are street legal in the sense that they are designed for being able to drive to the track without having to swap wheels / rubber but can be like iceskates in the wet. If you are worried about the inspection then a cheap set of Bridgestone RE003's (they are on sale - 4 for the price of 3 currently) or similar would be a great idea and you can get the NT01's swapped back on when you want the better grip after the inspection or when heading to the track.
 

Having habitually run R spec tyres on track in the wet I can tell you they are fine.  Faster than road tyres in fact.  So NFI where the ice skates thing comes from other than Nitto probably trying to cover their arses.

Link to comment
Share on other sites

2 hours ago, djr81 said:

Having habitually run R spec tyres on track in the wet I can tell you they are fine.  Faster than road tyres in fact.  So NFI where the ice skates thing comes from other than Nitto probably trying to cover their arses.

My R888R's (successor to the R888, which is the same compound as the NT01 but different tread pattern) are pretty sketchy in the rain on the street. I certainly wouldn't recommend them as an all around street tyre despite being 'street legal'. Light drizzle is ok but proper rain and/or pooling water is a no-no.

I think it's different on the track where you can get some heat into them but cold R comps in heavy rain on the street are dangerous IMHO. This is based on my experience with this single tyre only, perhaps others fare better.

Link to comment
Share on other sites

2 hours ago, djr81 said:

Having habitually run R spec tyres on track in the wet I can tell you they are fine.  Faster than road tyres in fact.  So NFI where the ice skates thing comes from other than Nitto probably trying to cover their arses.

You have to remember that they are more than happy to recommend & sell you a set of wet race tyres as well. :) 

I am guessing that you are correct - they probably are trying to cover their butts from people who want to use them on the street too as they really are more than a bit of of a handful in the wet on craptastic public roads due to water pooling and massive quantities of contaminants (oil, diesel etc) that come up during wet weather. This combined with the random on road behaviour of overly caffeinated, distracted people participating in food/coffee/cigarette/phone juggling contests makes for some white knuckle moments when running track focused rubber.

Its sort of the same experience you'd have with really, really nasty cheap tyres but is made much more surprising as you get used to having amazing grip normally!

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Much less twat-tastic. CF wheels are too garish for civilised use.
    • From there, as the manual says....assembly is the reverse of disassembly, no tricks worth mentioning Much better (for me)
    • In my case, the standard wheel I had was in good condition but the buttons had more wear, so I swapped them across from the original wheel from the car. The plastic rear cover is held on by 4 tabs, and once the wiring is removed you can get access to 2 screws on each side the hold the buttons in From there I just swapped the wiring over. What was interesting is the standard style wheel is 2.0kg but the carbon fibre one is 50% heavier at 2.9kg. It even has a weight inside the wheel at the top to make up for some sort of imbalance in the design. weird
    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stomp on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
×
×
  • Create New...