Jump to content
SAU Community

2001 STAGEA COMPLETE CAR ALL PARTS AVAILABLE

quoxxs
 Share

Recommended Posts

quoxxs Rookie

quoxxs

Posted
Posted

2001 STAGEA COMPLETE CAR ALL PARTS AVAILABLE

WILL PART OUT ALL PARTS, CONTACT TO GET A PRICE FOR WHAT YOU NEED.

01 Nissan stagea, Turbo 4wd 5 speed tipronic auto. Car is an unfinished project has been sitting for a while, has never been in an accident, not a repairable write off. Doors and tailgate had dents in them have been replaced but unpainted.

Engine has Arp headstuds, Cometic head gasket, all seals, water pump and water pump replaced 10,000 kms before coming off road. Turbo is not available. Vehicle had brembo calipers but have been removed. Rotors to suit the brembo are still on vehicle. Has a 600x300x125 inter cooler kit with stainless piping. Original xenon headlamps. 18inch alloy wheels
CAN ARRANGE FOR IT TO BE TOWED TO BRISBANE IF REQUIRED

CALL 0468698581

IMG_20170107_163906 - Copy.jpg

IMG_20170107_163915 - Copy.jpg

IMG_20170107_164411 - Copy.jpg

IMG_20170107_164422 - Copy.jpg

IMG_20170107_164455.jpg

IMG_20170107_164530.jpg

  • 4 months later...
  • 4 months later...
  • 2 weeks later...
oxford1327 Experienced

oxford1327

Posted
Posted

what number ECU is in the car please and how much ?

I am after one with the following numbers: 23740-0V811

  • 3 months later...
mavotin Newbie

mavotin

Posted
Posted

Hi there Ben,

I have rusted front turret tops on my Stagea that I need replacement panels for.

Do you still have yours in the car, and would you like to part with them??

Regards,

Martin

  • 1 month later...
  • 4 months later...
  • 3 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • DraftySquash
      Help Understand GTT Boost Setup

      By DraftySquash · Posted

      It was roughly 3.5 hours.    car went in around 11:00 and I was done around 2:30 He did the initial runs, install the BC and then Nistune install and tune.  The best part was sitting in the lobby and hearing the skyline on full throttle at the dyno 😂😂
    • Milkmun
      Help Understand GTT Boost Setup

      By Milkmun · Posted

      Glad it all went smooth. How long did the tuning process take?
    • DraftySquash
      Help Understand GTT Boost Setup

      By DraftySquash · Posted

      Yeah that was kind of the same feedback my tuner gave me.  the boost tee is until I can sort out my plan for the electronic boost controller and what I’d get, where I’d mount the dash etc.  I’m happy with this until I can figure it out. Not a big fan of the A-pillar gauges. I’d like to get a clean install of the boost gauge - something digital like GFB.  Something like that might fit neatly where the ashtray is and look clean. I feel like replacing the OEM triple gauge is a bit extreme for a weekender like my skyline. And it’s not making crazy power to need all the additional sensors/gauges. 
    • B-Boi34
      UniClutch

      By B-Boi34 · Posted

      I'm about to swap my box to Tremec T56 Magnum F & initially thinking of re-using my DCS twin plate (can get it re centred for the bigger spline) but it's been called out the box will be noisy (rattle) as the clutch is unsprung.  So I'm doing as much research as possible. I'm not so worried about holding the power as I'll go the track version which on paper will hold the maybe 1000hp I make. It's the longevity I worry about. DCS told me they don't use a sprung centre as it's just something that can break. The uni clutch has a very complicated sprung centre. Any one had or heard about any issues with it failing? Thanks in advance.
    • Kinkstaah
      Help Understand GTT Boost Setup

      By Kinkstaah · Posted

      Auto is at least 10% (from my real, actual experience with different torque converters and manual on the same setup) ~185rwkw at 11.6psi (peak!) is entirely what one would expect without a FMIC or anything else on the intake, it does bleed off towards the higher RPM so it's what, 9psi there? Note: There is nothing that can be done about this with a manual boost tee. If you want to hold it steady and gain more top end, well - You will need electronic boost control.....
×
×
  • Create New...